baclay9's 83' SWB Build - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

baclay9 · 08-12-2011, 11:11 PM

My wife sent me this pic to tease the S*$T out of me while I am on the job. Looking forward to getting it installed when I get home.

By claypool782 at 2011-08-11

**scotts62** · 08-12-2011, 11:17 PM

baclay9 · 08-28-2011, 08:46 PM

Got my motor started today. This is after cam break in.

IMG_0248.MOV - YouTube

73gmc454 · 08-28-2011, 09:18 PM

sounds good , bet yer smilin ear to ear !

baclay9 · 08-28-2011, 09:29 PM

I am pumped man. I wish I could take it for a drive!
Posted via Mobile Device

73gmc454 · 08-28-2011, 09:31 PM

oh yea I understand that , had mine out of the garage today , only need windshield and inner fender and I can get it on the pavement !

baclay9 · 08-28-2011, 09:50 PM

Now it is time to start tearing it apart for paint.

Oh also, I shredded a brand new Delco alternator while breaking the cam in. plastic just started shooting out of the housing. I don't know what was up with that.

carguy499 · 08-28-2011, 10:25 PM

nice lookin project gonna part out my 90 silverado burb to do the same thing

baclay9 · 08-30-2011, 06:54 AM

Here is my rendering just finished up by Turbo Joe. He did an awesome job. I highly recommend him if you are in the market.

By claypool782 at 2011-08-30

73gmc454 · 08-30-2011, 07:07 AM

That looks good , I like it everybody should have 1 of these done !

**scotts62** · 08-30-2011, 09:54 AM

Wow man that is going to look good!

baclay9 · 08-30-2011, 09:58 PM

Got my headers put on today. I have an appointment to get exhaust put on it Thursday. I will get some pics of it then.

Also, The Sanderson BB8 headers are suppose to be a direct bolt on for our trucks with a BB. The driver side went on with no issues. Passenger side needed a little clearancing on the motor mount bracket and I had to trim a ear off of my turbo 400. No big deal but wanted to get the info out there.

JohnC · 08-31-2011, 09:06 AM

sounds good man, and the rendering looks sweet as well!

baclay9 · 09-01-2011, 07:22 PM

Got the exhaust put on today. He did an awesome job! I am very happy with the way everything came out. Everything is inside the frame rails incase I ever decide to bag it and it is nice and neat.

Here is a pic of the guy that does my exhaust. It caught me funny him standing in my truck to drive it off the trailer.

By claypool782 at 2011-09-01

This is the only shot I got while it was on the lift.

By claypool782 at 2011-09-01

Here are a couple of shots of the engine with the headers on it. I have a 5" filter on it now but I am going to have to drop to a shorter one. This one barely hits my hood.

By claypool782 at 2011-09-01

77BBGMC · 09-01-2011, 11:11 PM

Headers look good! I'm wishing I would've gone with the BB8's. Post a video so we can hear it with the new exhaust.
Posted via Mobile Device

luifer76 · 09-02-2011, 12:16 PM

The whole exhaust system look really good man.....

baclay9 · 09-05-2011, 07:31 AM

Picked this up a couple of days ago. I am going to use the cab on my truck. I actually picked the whole thing up cheaper than it would have been to replace the cab corners, rockers, and floor pans mine needed. It is 100% rust free. It is an 86'. The inside was full of parts too. Got a good gauge bezel, a grill to sell and a set of stock hub caps. Not sure if they are worth anything or not.

By claypool782 at 2011-09-05

**scotts62** · 09-05-2011, 10:10 AM

Wow it does look nice and straight!

bradford · 09-05-2011, 10:51 AM

Barclay, you go to work too much.
Dont leave again until this truck is done and you have pics posted.
Thank you.

pretra · 09-05-2011, 08:32 PM

Hey Brandon, I just stumbled onto this thread. I had no idea you had gotten yourselve in this deep. Lookin good. Let me know if I can help you out. Oh, tell your old man to get off his butt and get to work while your gone.

baclay9 · 09-05-2011, 08:38 PM

Quote:

Originally Posted by pretra

Hey Brandon, I just stumbled onto this thread. I had no idea you had gotten yourselve in this deep. Lookin good. Let me know if I can help you out. Oh, tell your old man to get off his butt and get to work while your gone.

Clay? Hows it going man? Yep, I have gotten in pretty deep on this one. Starting to see some light at the end of the tunnel though.

franky69c10 · 09-06-2011, 06:39 PM

What headers r u running
Posted via Mobile Device

baclay9 · 09-06-2011, 06:53 PM

They are Sanderson BB8's
Posted via Mobile Device

JohnC · 09-08-2011, 08:31 PM

Nice score on the parts truck man.

**scotts62** · 09-08-2011, 11:52 PM

When you going to get it blasted?

08-12-2011, 11:11 PM	#176
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build My wife sent me this pic to tease the S*$T out of me while I am on the job. Looking forward to getting it installed when I get home. By claypool782 at 2011-08-11

08-12-2011, 11:17 PM	#177
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build __________________ Scott 93 crew cab build Project 62

08-28-2011, 09:18 PM	#179
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: baclay9's 83' SWB Build sounds good , bet yer smilin ear to ear ! __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

08-28-2011, 09:29 PM	#180
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build I am pumped man. I wish I could take it for a drive! Posted via Mobile Device

08-28-2011, 09:31 PM	#181
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: baclay9's 83' SWB Build oh yea I understand that , had mine out of the garage today , only need windshield and inner fender and I can get it on the pavement ! __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

08-28-2011, 09:50 PM	#182
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Now it is time to start tearing it apart for paint. Oh also, I shredded a brand new Delco alternator while breaking the cam in. plastic just started shooting out of the housing. I don't know what was up with that.

08-28-2011, 10:25 PM	#183
carguy499 Registered User Join Date: May 2011 Location: victoria british columbia Posts: 6	Re: baclay9's 83' SWB Build nice lookin project gonna part out my 90 silverado burb to do the same thing

08-30-2011, 06:54 AM	#184
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Here is my rendering just finished up by Turbo Joe. He did an awesome job. I highly recommend him if you are in the market. By claypool782 at 2011-08-30

08-30-2011, 07:07 AM	#185
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: baclay9's 83' SWB Build That looks good , I like it everybody should have 1 of these done ! __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

08-30-2011, 09:54 AM	#186
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build Wow man that is going to look good! __________________ Scott 93 crew cab build Project 62

08-30-2011, 09:58 PM	#187
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Got my headers put on today. I have an appointment to get exhaust put on it Thursday. I will get some pics of it then. Also, The Sanderson BB8 headers are suppose to be a direct bolt on for our trucks with a BB. The driver side went on with no issues. Passenger side needed a little clearancing on the motor mount bracket and I had to trim a ear off of my turbo 400. No big deal but wanted to get the info out there.

08-31-2011, 09:06 AM	#188
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build sounds good man, and the rendering looks sweet as well!

09-01-2011, 07:22 PM	#189
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Got the exhaust put on today. He did an awesome job! I am very happy with the way everything came out. Everything is inside the frame rails incase I ever decide to bag it and it is nice and neat. Here is a pic of the guy that does my exhaust. It caught me funny him standing in my truck to drive it off the trailer. By claypool782 at 2011-09-01 This is the only shot I got while it was on the lift. By claypool782 at 2011-09-01 Here are a couple of shots of the engine with the headers on it. I have a 5" filter on it now but I am going to have to drop to a shorter one. This one barely hits my hood. By claypool782 at 2011-09-01 By claypool782 at 2011-09-01

09-01-2011, 11:11 PM	#190
77BBGMC Registered User Join Date: May 2009 Location: Kansas Posts: 357	Re: baclay9's 83' SWB Build Headers look good! I'm wishing I would've gone with the BB8's. Post a video so we can hear it with the new exhaust. Posted via Mobile Device

09-02-2011, 12:16 PM	#191
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: baclay9's 83' SWB Build The whole exhaust system look really good man..... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....



Register or Log In To remove these advertisements.

09-05-2011, 07:31 AM	#192
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Picked this up a couple of days ago. I am going to use the cab on my truck. I actually picked the whole thing up cheaper than it would have been to replace the cab corners, rockers, and floor pans mine needed. It is 100% rust free. It is an 86'. The inside was full of parts too. Got a good gauge bezel, a grill to sell and a set of stock hub caps. Not sure if they are worth anything or not. By claypool782 at 2011-09-05 By claypool782 at 2011-09-05 By claypool782 at 2011-09-05

09-05-2011, 10:10 AM	#193
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build Wow it does look nice and straight! __________________ Scott 93 crew cab build Project 62

09-05-2011, 10:51 AM	#194
bradford Registered User Join Date: Oct 2009 Location: North Carolina Posts: 151	Re: baclay9's 83' SWB Build Barclay, you go to work too much. Dont leave again until this truck is done and you have pics posted. Thank you.

09-05-2011, 08:32 PM	#195
pretra Registered User Join Date: Mar 2010 Location: Purcell, OK Posts: 1	Re: baclay9's 83' SWB Build Hey Brandon, I just stumbled onto this thread. I had no idea you had gotten yourselve in this deep. Lookin good. Let me know if I can help you out. Oh, tell your old man to get off his butt and get to work while your gone.

09-06-2011, 06:39 PM	#197
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: baclay9's 83' SWB Build What headers r u running Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

09-06-2011, 06:53 PM	#198
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build They are Sanderson BB8's Posted via Mobile Device

09-08-2011, 08:31 PM	#199
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build Nice score on the parts truck man.

09-08-2011, 11:52 PM	#200
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build When you going to get it blasted? __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.