|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-21-2011, 04:57 PM
|
#1 |
|
Registered User
Join Date: Aug 2011
Location: HI
Posts: 4
|
1964 C10 with 3-speed, 327 engine from 69 Camaro
Hi, I am new to the board. Does anyone know whether a 327 engine from a 1969 Camaro would bolt right up to the 3-speed trans of a 1964 C10 that currently has a 292 engine? Could I use the stock engine mounts from either the 64 C10 or the 69 Camaro?
|
|
|
|
08-22-2011, 12:39 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 1964 C10 with 3-speed, 327 engine from 69 Camaro
Welcome to the forum
 Yes a 327 will bolt right up to the bellhousing that the 292 was bolted to. I don't think the flywheel from the 292 will bolt up correctly to the 327. You will likely need a flywheel from another small block. The motor mount brackets for the 292 are offset, whereas the small block and 230/250 brackets are all the same. If you need a set of original mount brackets that will work with your 327, let me know. The motor mounts from the Camaro will not work in the truck.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
08-22-2011, 12:42 AM
|
#3 |
|
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: 1964 C10 with 3-speed, 327 engine from 69 Camaro
Welcome to the forum!
|
|
|
|
|
08-22-2011, 02:07 AM
|
#4 |
|
Registered User
Join Date: Aug 2011
Location: HI
Posts: 4
|
Re: 1964 C10 with 3-speed, 327 engine from 69 Camaro
Thanks for the help. My son and I actually got the 292 running today, and it runs smooth. He's only 15 and gets his license in April. I may let him run the 292 for now, then throw in the 327 later. You guys are great.
|
|
|
|
|
08-22-2011, 02:09 AM
|
#5 |
|
Registered User
Join Date: Aug 2011
Location: HI
Posts: 4
|
Re: 1964 C10 with 3-speed, 327 engine from 69 Camaro
Captainfab, where can I get the motor mounts for the 327?
|
|
|
|
|
08-22-2011, 02:44 AM
|
#6 |
|
Registered User
Join Date: Aug 2011
Location: HI
Posts: 4
|
Re: 1964 C10 with 3-speed, 327 engine from 69 Camaro
Would also happen to know where the fuel filter is located?
|
|
|
|
|
08-22-2011, 03:01 AM
|
#7 | |
|
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: 1964 C10 with 3-speed, 327 engine from 69 Camaro
Quote:
ron |
|
|
|
|
|
08-22-2011, 09:23 AM
|
#8 |
|
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: 1964 C10 with 3-speed, 327 engine from 69 Camaro
Motor perches are different for the 292 and everything else, you would need to source some SB or small 6cyl mounts. You could also go with aftermarket perches.
I have a pair of them if your interested.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684  support our troops! |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
