|
09-01-2011, 08:28 PM
|
#1 |
|
Registered User
 
Join Date: Oct 2008
Location: Edmonton, alberta, canada
Posts: 189
|
Shocks
Sometime ago I purchased another guys project and he was building a stock ride 68. I have since made some changes. I'm lowering it with 5 in drop coils in the rear and 2 in coils and 2in spindles in the front. in the parts that came with the truck are QA1 adjustable shock, I'm assuming they are stock ride shocks. The question is can I use them on the now lowered truck? I have attached a picture. Any help would be appreciated. Thanks
|
|
|
|
09-01-2011, 10:48 PM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Shocks
Best thing to do is verify this for yourself; anything else is just guessing.
With the 'new' drop parts on & the truck on the ground (or in the air w/full weight on the suspension), measure the dimensions between your upper & lower shock mounts front & rear. Compare those dimensions against the shocks dimensions (you need to know the fully compressed & max extended length of the shocks).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
