|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-27-2011, 12:32 AM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Michigan
Posts: 44
|
I looked all over, how much does a 60-66 1/2 ton weigh?
Search failed me, Google failed me. Maybe you can help. How much does your truck weigh?
I'm guessing about 4000lb?
__________________
1963 GMC Wideside powered by a LH2 32v Northstar |
|
|
|
09-27-2011, 12:42 AM
|
#2 |
|
Registered User
Join Date: Aug 2008
Location: vancouver wa
Posts: 23
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
I went out and looked at the factory tag on my 62 swb it says 5200 lb
|
|
|
|
|
09-27-2011, 01:03 AM
|
#3 |
|
Registered User
Join Date: Jul 2011
Location: Michigan
Posts: 44
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
Is that the GVWR? I found two GVWR's. One for 5000 and one for 7000lbs.
__________________
1963 GMC Wideside powered by a LH2 32v Northstar |
|
|
|
|
09-27-2011, 01:16 AM
|
#4 |
|
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
This thread should help. My short step weighs about 3700 lbs without people. The 33 gallon fuel tank holds another 200+ lbs:
http://67-72chevytrucks.com/vboard/s...d.php?t=405606 |
|
|
|
|
09-27-2011, 08:18 AM
|
#5 |
|
Check The Champ, Demonstrator
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
I'm not anywhere near my books but a four wheel drive curb weight..... but then that's GM just being honest.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
|
|
|
|
09-27-2011, 09:12 AM
|
#6 | |
|
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
Quote:
G gross V vehicle W weight R Rating with what mark said you would take GVWR 5000lbs - Actual Weight 3700lbs + fuel 300lbs = 1000lb payload.--(half ton) The 7000lb is probably GCWR Gross combined weight rating which would be total vehicle weight and the trailer one is pulling It would be calculated the same way, 7000lbs - (trailer weight 1000 +4000lbs) = payload of the truck and trailer together say 2000 lbs.... Kieth this actually gets carried further to each axles capacity and the rating of the tires to carry the actual load. Kieth Last edited by kieth; 09-27-2011 at 09:17 AM. |
|
|
|
|
|
09-27-2011, 09:19 AM
|
#7 |
|
Registered User
Join Date: Aug 2011
Location: Kingman, AZ
Posts: 1,574
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
Right around 4100 pounds depending on what came on the truck, what motor, how much fuel etc, etc.
|
|
|
|
|
09-27-2011, 10:15 PM
|
#8 |
|
Registered User
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
Took a load of steel to the recycler, empty weight with my butt in the truck was 3,840 lbs `64 short fleetside.
__________________
`64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip |
|
|
|
|
09-27-2011, 11:27 PM
|
#9 |
|
Registered User
Join Date: Jul 2011
Location: Michigan
Posts: 44
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
I'm trying to determine the adjusted horsepower rating for my engine.
If it was rated for 320hp in a 3960lbs Cadillac, and my GMC weighs 3,435lbs the difference is 525lbs. I'm estimating the Northstar is 200lbs lighter than the 305 V6 that was in it. This gives me an adjusted weight of 3235lbs, a difference of 725lbs. Just not sure how to plug this in to get the adjusted HP.
__________________
1963 GMC Wideside powered by a LH2 32v Northstar |
|
|
|
|
09-27-2011, 11:30 PM
|
#10 |
|
Registered User
Join Date: Jul 2009
Location: Menifee, CA
Posts: 471
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
I recently had my '66 SWB Fleetside weighed for DMV purposes. 3820 lbs with a half tank of gas.
|
|
|
|
|
10-01-2011, 03:38 AM
|
#11 |
|
Registered User
Join Date: Jul 2011
Location: Michigan
Posts: 44
|
Re: I looked all over, how much does a 60-66 1/2 ton weigh?
I've heard it's 1hp for every 10lbs dropped roughly. This would mean the HP for the engine is 392hp. Wish there was a dyno around!
__________________
1963 GMC Wideside powered by a LH2 32v Northstar |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
