VA Restored woodgrain panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 10-22-2011, 02:09 AM

Here are a matching set of woodgrain panels. Includes a cheyenne super glovebox door that's been polished and restored by cheyenne super man, a matching new chrome and woodgrain gauge bezel, and 72 specific door panels. The nice thing is that all the woodgrain matches. This is GM NOS woodgrain Cheyenne super man purchased years ago. It is not the same as the original interior woodgrain, I believe it is what was used on the lower woodgrain moldings on the exterior.

Selling as a set. 500 shipped in CONUS firm.

71 or 72 specific glovebox door emblem or sierra grande for $50 extra (75 shipped if purchased separately) and a polished knob for the glovebox door for 25 extra (35 separately)

Check, money order, or paypal (if you pay the fees)

VA72C10 · 10-22-2011, 02:10 AM

Note the bezel shown has an extra hole for a throttle. I sold that one already...the bezel I have is the same minus the extra hole.

silverboy02 · 10-22-2011, 02:38 AM

That's a great price, if I was at that point on mine I would take them off your hands

VA72C10 · 10-22-2011, 05:56 AM

Thanks!

VA72C10 · 10-22-2011, 05:02 PM

Leddzepp has first dibbs on these. He's been wanting some and was waiting for some parts to sell so I'm going to give him until tomorrow on these.

**lolife99** · 10-22-2011, 07:49 PM

Is the glovebox door bronze in color?
Interested in the dash and glovebox door only.

OhOneWS6 · 10-22-2011, 08:38 PM

Quote:

Originally Posted by lolife99

Is the glovebox door bronze in color?
Interested in the dash and glovebox door only.

I might be interested in the door inserts only. Maybe we can make something work.

**lolife99** · 10-22-2011, 08:49 PM

I just noticed the extra hole underneath the wiper switch hole on the gauge bezel.
What would that be for?
(edit: I need to read a little better)

VA72C10 · 10-22-2011, 09:32 PM

Quote:

Originally Posted by lolife99

Is the glovebox door bronze in color?
Interested in the dash and glovebox door only.

This is actually an old picture. This one was damaged in shipment so I sent another one to CSM and he's in the process of restoring....will actually ship straight from him. The door it is on is blue. Your choice of a 71 or 72 glovebox door emblem. 250 shipped for the door, emblem, polished glovebox door button, and matching woodgrain and chrome bezel

Quote:

Originally Posted by lolife99

I just noticed the extra hole underneath the wiper switch hole on the gauage bezel.
What would that be for?

That was for throttle control. As mentioned, I sold that one and the one I have does not have the extra hole...

Quote:

Originally Posted by OhOneWS6

I might be interested in the door inserts only. Maybe we can make something work.

Door inserts 350 shipped including polished outer trim to hold it in as shown in picture.

VA72C10 · 10-22-2011, 09:34 PM

Of course you can install the woodgrain panel on any glovebox door by drilling three holes where the emblem is then gluing the panel onto that door or using 3m double stick tape.

VA72C10 · 10-22-2011, 09:36 PM

I actually have two complete setups so Ledzepp is still first in line for a completed setup. If he takes it there might be a delay in shipping one of the glovebox doors while CSM restores it. (I have a credit with him for the shipping damage)

**leddzepp** · 10-23-2011, 03:15 AM

Jonathan, I will take it, pending just a couple quick questions. As I understand it, the glovebox door for sale is a blue one that CSM is finishing up? If so, that is not a problem, I want the 72 emblem

.... other than that, is it ready to be shipped from CSM? Are the door panels the actual ones pictured above and is the gauge bezel and the panels coming from you or CSM? None of this is a problem, just want to clarify that I am reading correctly.
Thank you for giving me first shot at this, I really appreciate it.

OhOneWS6 · 10-23-2011, 12:46 PM

Quote:

Originally Posted by VA72C10

Door inserts 350 shipped including polished outer trim to hold it in as shown in picture.

I think I am going to wait. It may be a while before I can install these. I would really like to find a set of nice originals.

VA72C10 · 10-23-2011, 04:04 PM

Quote:

Originally Posted by OhOneWS6

I think I am going to wait. It may be a while before I can install these. I would really like to find a set of nice originals.

I have a set of those too. I'll take some pictures and post this evening.

VA72C10 · 10-23-2011, 04:05 PM

Quote:

Originally Posted by leddzepp

Jonathan, I will take it, pending just a couple quick questions. As I understand it, the glovebox door for sale is a blue one that CSM is finishing up? If so, that is not a problem, I want the 72 emblem

.... other than that, is it ready to be shipped from CSM? Are the door panels the actual ones pictured above and is the gauge bezel and the panels coming from you or CSM? None of this is a problem, just want to clarify that I am reading correctly.
Thank you for giving me first shot at this, I really appreciate it.

pm replied. The door panels are the ones pictured. I have one bezel but will probably have CSM ship the other one I have credit for with the door. He expects to finish the glovebox door this week. I can ship the door panels out whenever.

kellytheaker · 10-23-2011, 05:28 PM

just thought i would ask what is a guage bezel worth - the original heavy backed woodgrain - i may be interested i one .

VA72C10 · 10-23-2011, 05:53 PM

Quote:

Originally Posted by kellytheaker

just thought i would ask what is a guage bezel worth - the original heavy backed woodgrain - i may be interested i one .

I don't have any of the original style. The last chrome with wood one I saw sold for around or over 1000 if I remember correctly.

kellytheaker · 10-23-2011, 05:59 PM

sorry i did not wish to imply i would be a palyer at that amount - i misunderstood . i thought when you said the original material was used on these redone pieces i thouight you meant the original mylar covered woodgrain weas being used - the heavy stuff . these you have posted are just an overlay of lighter reproduction film? and no clear mylar overlay on them .

VA72C10 · 10-23-2011, 06:18 PM

Quote:

Originally Posted by kellytheaker

sorry i did not wish to imply i would be a palyer at that amount - i misunderstood . i thought when you said the original material was used on these redone pieces i thouight you meant the original mylar covered woodgrain weas being used - the heavy stuff . these you have posted are just an overlay of lighter reproduction film? and no clear mylar overlay on them .

i don't have one like that anyways

These use nos gm woodgrain originally used on the exterior woodgrain. it does not have the thickness of a stock one.

**leddzepp** · 10-24-2011, 03:13 AM

Jonathan- These are VERY nice pieces, and a GREAT price for an all-matching woodgrain interior...but I am afraid I am going to pass on the package. I am going to hold out for NOS or excellent original. I am happy to say that two different body/paint guys stopped by the house today, since I was unable to go to their shops Saturday. Both of them looked over my truck meticulously, and both quoted me finish body work and a show quality paint job for less than I had anticipated paying for a "middle-of-the-road" job, and now I can justify going all original.

Thanks again for holding these for me, I truly appreciate it!

Bump for a great deal

VA72C10 · 10-24-2011, 03:23 AM

No problem. Too bad you missed my nos door panels

One good thing about this economy....deals (the paint)

VA72C10 · 10-24-2011, 04:12 AM

Quote:

Originally Posted by OhOneWS6

I think I am going to wait. It may be a while before I can install these. I would really like to find a set of nice originals.

Here's the nicest set I have. Not perfect but far better than most used ones I have seen. 125 shipped on these with the chrome outer trim rings.

two worn spots

minor scratches
handle hides most of these

other minor wear

OhOneWS6 · 10-24-2011, 12:43 PM

Quote:

Originally Posted by VA72C10

Here's the nicest set I have. Not perfect but far better than most used ones I have seen. 125 shipped on these with the chrome outer trim rings.

Let me go back out and look at mine. How much shipped to a business at 75088? I guess I need to make a list of what else I need. Might could save on some shipping from you. LOL.

VA72C10 · 10-24-2011, 12:59 PM

Probably $10 less to a business address so 115 shipped. Let me know what else you're needing and I'll let you know what I have. Thanks

OhOneWS6 · 10-25-2011, 11:44 AM

Quote:

Originally Posted by VA72C10

Probably $10 less to a business address so 115 shipped. Let me know what else you're needing and I'll let you know what I have. Thanks

I guess all I need right now is the inserts. Paypal OK again? Same address?

Thanks Matt

10-22-2011, 02:09 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Restored woodgrain panels Here are a matching set of woodgrain panels. Includes a cheyenne super glovebox door that's been polished and restored by cheyenne super man, a matching new chrome and woodgrain gauge bezel, and 72 specific door panels. The nice thing is that all the woodgrain matches. This is GM NOS woodgrain Cheyenne super man purchased years ago. It is not the same as the original interior woodgrain, I believe it is what was used on the lower woodgrain moldings on the exterior. Selling as a set. 500 shipped in CONUS firm. 71 or 72 specific glovebox door emblem or sierra grande for $50 extra (75 shipped if purchased separately) and a polished knob for the glovebox door for 25 extra (35 separately) Check, money order, or paypal (if you pay the fees) __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 11-19-2011 at 03:41 PM.

10-22-2011, 02:10 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored woodgrain panels Note the bezel shown has an extra hole for a throttle. I sold that one already...the bezel I have is the same minus the extra hole. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2011, 02:38 AM	#3
silverboy02 Registered User Join Date: May 2008 Location: Grenada, MS Posts: 127	Re: Restored woodgrain panels That's a great price, if I was at that point on mine I would take them off your hands

10-22-2011, 05:56 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored woodgrain panels Thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2011, 05:02 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored woodgrain panels Leddzepp has first dibbs on these. He's been wanting some and was waiting for some parts to sell so I'm going to give him until tomorrow on these. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2011, 07:49 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Restored woodgrain panels Is the glovebox door bronze in color? Interested in the dash and glovebox door only. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-22-2011, 08:49 PM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Restored woodgrain panels I just noticed the extra hole underneath the wiper switch hole on the gauge bezel. What would that be for? (edit: I need to read a little better) __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 10-23-2011 at 04:01 PM.

10-22-2011, 09:34 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored woodgrain panels Of course you can install the woodgrain panel on any glovebox door by drilling three holes where the emblem is then gluing the panel onto that door or using 3m double stick tape. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2011, 09:36 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored woodgrain panels I actually have two complete setups so Ledzepp is still first in line for a completed setup. If he takes it there might be a delay in shipping one of the glovebox doors while CSM restores it. (I have a credit with him for the shipping damage) __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-23-2011, 03:15 AM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,048	Re: Restored woodgrain panels Jonathan, I will take it, pending just a couple quick questions. As I understand it, the glovebox door for sale is a blue one that CSM is finishing up? If so, that is not a problem, I want the 72 emblem .... other than that, is it ready to be shipped from CSM? Are the door panels the actual ones pictured above and is the gauge bezel and the panels coming from you or CSM? None of this is a problem, just want to clarify that I am reading correctly. Thank you for giving me first shot at this, I really appreciate it. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-23-2011, 05:28 PM	#16
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Restored woodgrain panels just thought i would ask what is a guage bezel worth - the original heavy backed woodgrain - i may be interested i one .

10-23-2011, 05:59 PM	#18
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Restored woodgrain panels sorry i did not wish to imply i would be a palyer at that amount - i misunderstood . i thought when you said the original material was used on these redone pieces i thouight you meant the original mylar covered woodgrain weas being used - the heavy stuff . these you have posted are just an overlay of lighter reproduction film? and no clear mylar overlay on them .

10-24-2011, 03:13 AM	#20
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,048	Re: Restored woodgrain panels Jonathan- These are VERY nice pieces, and a GREAT price for an all-matching woodgrain interior...but I am afraid I am going to pass on the package. I am going to hold out for NOS or excellent original. I am happy to say that two different body/paint guys stopped by the house today, since I was unable to go to their shops Saturday. Both of them looked over my truck meticulously, and both quoted me finish body work and a show quality paint job for less than I had anticipated paying for a "middle-of-the-road" job, and now I can justify going all original. Thanks again for holding these for me, I truly appreciate it! Bump for a great deal __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-24-2011, 03:23 AM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored woodgrain panels No problem. Too bad you missed my nos door panels One good thing about this economy....deals (the paint) __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-24-2011, 12:59 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Restored woodgrain panels Probably $10 less to a business address so 115 shipped. Let me know what else you're needing and I'll let you know what I have. Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.