Question about lowering springs? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Patina · 10-23-2011, 12:36 PM

Any input from you guys/gals concerning who makes the best lowering springs for a 65 c10. I'm not talking crazy in the weeds slammed just 2" all around maybe even 3" in front 2" in back (I want a slight rake)

looking for quality in both the manufacturing department and ride/handling characteristics. Basically I don't want the truck to handle like a lowered civic if you catch my drift.

Here is a list of companies that seem to have a good following given my limited research on the forum and google but like I said I will consider anything right now...

Eibach
Belltech
CPP

I will not be cutting coils or getting Jeep springs so keep those suggestions to yourselves. Thanks for any input!

**MisterC** · 10-23-2011, 01:09 PM

I've purchased 2 different sets from Early Classic Enterprises, for previous trucks that I've owned, and I was very happy with them. With that said, start the rear lowering with 2" lowering blocks before you go to lowered springs. It will achieve the same effect and you won't sacrifice ride quality. No Limit Engineering sells them and they're a forum vendor.

Blue Heeler · 10-23-2011, 01:22 PM

CPP, I ordered mine on e-bay free shipping to your door!! comes with springs,shocks bushings and replacement hardware. I did the 3"front 4"rear i like it.

gimmy 64 · 10-23-2011, 06:38 PM

i have a pair of eibach 3 in. lowering springs for sale for $100 shipped. were only on truck about 6 months

10-23-2011, 12:36 PM	#1
Patina Registered User Join Date: Jul 2010 Location: USA Posts: 48	Question about lowering springs? Any input from you guys/gals concerning who makes the best lowering springs for a 65 c10. I'm not talking crazy in the weeds slammed just 2" all around maybe even 3" in front 2" in back (I want a slight rake) looking for quality in both the manufacturing department and ride/handling characteristics. Basically I don't want the truck to handle like a lowered civic if you catch my drift. Here is a list of companies that seem to have a good following given my limited research on the forum and google but like I said I will consider anything right now... Eibach Belltech CPP I will not be cutting coils or getting Jeep springs so keep those suggestions to yourselves. Thanks for any input!

10-23-2011, 01:09 PM	#2
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: Question about lowering springs? I've purchased 2 different sets from Early Classic Enterprises, for previous trucks that I've owned, and I was very happy with them. With that said, start the rear lowering with 2" lowering blocks before you go to lowered springs. It will achieve the same effect and you won't sacrifice ride quality. No Limit Engineering sells them and they're a forum vendor. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

10-23-2011, 01:22 PM	#3
Blue Heeler Registered User Join Date: Dec 2010 Location: Venice, Ca. Posts: 314	Re: Question about lowering springs? CPP, I ordered mine on e-bay free shipping to your door!! comes with springs,shocks bushings and replacement hardware. I did the 3"front 4"rear i like it.

10-23-2011, 06:38 PM	#4
gimmy 64 Registered User Join Date: Sep 2009 Location: menifee california Posts: 788	Re: Question about lowering springs? i have a pair of eibach 3 in. lowering springs for sale for $100 shipped. were only on truck about 6 months



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.