GA 6 cyl power steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 10-23-2011, 08:20 AM

$125 shipped, rockdog2020 has first shot.

rockdogg2020 · 10-23-2011, 08:37 AM

Power steering for a six is new to me. Is this the complete set up? (Exception of the return line) What else will i need.

**LockDoc** · 10-23-2011, 08:47 AM

If Rock passes I will take it.

LockDoc

Prathbun · 10-23-2011, 09:50 AM

I'll be next in line!!

Thanks!!!

rockdogg2020 · 10-23-2011, 11:37 AM

I'll take it.

**southern parts** · 10-23-2011, 11:46 AM

rockdogg2020- i`ll pm with payment info

lockdoc & prathbun- i have 2 other 6cyl ps set ups. both are mid 70`s non integrated head (square pump housing) $100 ea shipped. i`ll get pics if your interested

**LockDoc** · 10-23-2011, 04:40 PM

Quote:

Originally Posted by southern parts

rockdogg2020- i`ll pm with payment info

lockdoc & prathbun- i have 2 other 6cyl ps set ups. both are mid 70`s non integrated head (square pump housing) $100 ea shipped. i`ll get pics if your interested

I'm in line for one of those then. Pics would be nice. Thanks.

LockDoc

**southern parts** · 10-23-2011, 07:29 PM

here you are

Prathbun · 10-23-2011, 08:22 PM

I'll pass

**LockDoc** · 10-23-2011, 10:17 PM

Quote:

Originally Posted by southern parts

here you are

OK, bottom picture, the one on the left looks like it may be bent on the bottom corner but the one on the right looks like it may be missing the alternator adjuster bracket. Need some input on that. Thanks. Also, do you clean your parts at all before you ship them? I know if something leaks and it shows on the outside of the box the post office will put a hold on it until they find out what it is.

LockDoc

**southern parts** · 10-24-2011, 09:36 PM

alt adjusting slot is made into the large bracket. i will drain fluid and wire brush the exterier, then put it into a plastic bag before i ship.
i can get more pics if needed, but it may be a couple days . work schedule is hectic right now

**LockDoc** · 10-24-2011, 11:05 PM

Quote:

Originally Posted by southern parts

alt adjusting slot is made into the large bracket. i will drain fluid and wire brush the exterier, then put it into a plastic bag before i ship.
i can get more pics if needed, but it may be a couple days . work schedule is hectic right now

I would like to see a picture of them from the front below the pulley. Thanks.

LockDoc

**70STOVEBOLT** · 10-25-2011, 11:54 AM

Leon, that looks like the setup I have. The only thing I see missing is the rear support that runs down to the bottom alternator bracket. I don't know if that is absolutely necessary, but it gives extra support. If the pump works, this is a pretty good deal, IMO.

shawno72 · 10-25-2011, 12:03 PM

Quote:

Originally Posted by LockDoc

I would like to see a picture of them from the front below the pulley. Thanks.

LockDoc

Put me in line for one of those pending pics.

**southern parts** · 10-25-2011, 07:52 PM

here`s a pic from the lower front.

**LockDoc** · 10-25-2011, 08:57 PM

Quote:

Originally Posted by 70STOVEBOLT

Leon, that looks like the setup I have. The only thing I see missing is the rear support that runs down to the bottom alternator bracket. I don't know if that is absolutely necessary, but it gives extra support. If the pump works, this is a pretty good deal, IMO.

Thanks Stovebolt... I think I could make the brace.

LockDoc

**LockDoc** · 10-25-2011, 08:59 PM

Quote:

Originally Posted by southern parts

here`s a pic from the lower front.

OK, I will take that one for $100 shipped. PM me your payment info and contact info in case I need to get a hold of you.. Thanks.

LockDoc

**southern parts** · 10-25-2011, 09:10 PM

i`ve seen and had a lot of 6 cyl ps setups, very few have the brace your talking about . i have one around here somewhere, if i can find it i will include it.

shawno72 · 10-25-2011, 09:23 PM

Ok in regards to the ps pump and bracket that is left, is it missing a piece or is the alternator adjuster bracket there? Would like to see a pic of the lower front for the one that is left.
Posted via Mobile Device

**southern parts** · 10-25-2011, 09:29 PM

all complete 6 cyl ps pump setups are sold, i have a couple other partial setups. thanks, Woody

shawno72 · 10-25-2011, 09:59 PM

According to what I read in the posting you had a picture of two pumps for lockdoc and prathbun and prathbun passed leaving one pump. I was next to get in line so I assumed since you had one pump..... Well anyway do you have any more six cylinder bracket set ups?
Posted via Mobile Device

**LockDoc** · 10-25-2011, 10:04 PM

Quote:

Originally Posted by LockDoc

OK, I will take that one for $100 shipped. PM me your payment info and contact info in case I need to get a hold of you.. Thanks.

LockDoc

PayPal sent. I added a little extra to help with the PayPal fees. Thanks Woody.

LockDoc

**southern parts** · 10-25-2011, 10:22 PM

sorry , the pic is about 4 mos. old. i still have the other pump, but the large cradle bracket has been cut

shawno72 · 10-25-2011, 10:32 PM

Quote:

Originally Posted by southern parts

sorry , the pic is about 4 mos. old. i still have the other pump, but the large cradle bracket has been cut

Ok no problem. Do you have any more six cylinder bracket setups?
Posted via Mobile Device

10-23-2011, 08:20 AM	#1
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	6 cyl power steering $125 shipped, rockdog2020 has first shot. Attached Images

10-23-2011, 08:37 AM	#2
rockdogg2020 Registered User Join Date: Apr 2011 Location: Jackson, MS Posts: 90	Re: 6 cyl power steering Power steering for a six is new to me. Is this the complete set up? (Exception of the return line) What else will i need.

10-23-2011, 08:47 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,852	Re: 6 cyl power steering If Rock passes I will take it. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-23-2011, 09:50 AM	#4
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: 6 cyl power steering I'll be next in line!! Thanks!!! __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

10-23-2011, 11:37 AM	#5
rockdogg2020 Registered User Join Date: Apr 2011 Location: Jackson, MS Posts: 90	Re: 6 cyl power steering I'll take it.

10-23-2011, 11:46 AM	#6
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 6 cyl power steering rockdogg2020- i`ll pm with payment info lockdoc & prathbun- i have 2 other 6cyl ps set ups. both are mid 70`s non integrated head (square pump housing) $100 ea shipped. i`ll get pics if your interested

10-23-2011, 07:29 PM	#8
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 6 cyl power steering here you are Attached Images

10-23-2011, 08:22 PM	#9
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: 6 cyl power steering I'll pass __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

10-24-2011, 09:36 PM	#11
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 6 cyl power steering alt adjusting slot is made into the large bracket. i will drain fluid and wire brush the exterier, then put it into a plastic bag before i ship. i can get more pics if needed, but it may be a couple days . work schedule is hectic right now

10-25-2011, 11:54 AM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,450	Re: 6 cyl power steering Leon, that looks like the setup I have. The only thing I see missing is the rear support that runs down to the bottom alternator bracket. I don't know if that is absolutely necessary, but it gives extra support. If the pump works, this is a pretty good deal, IMO. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-25-2011, 07:52 PM	#15
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 6 cyl power steering here`s a pic from the lower front. Attached Images

10-25-2011, 09:10 PM	#18
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 6 cyl power steering i`ve seen and had a lot of 6 cyl ps setups, very few have the brace your talking about . i have one around here somewhere, if i can find it i will include it.

10-25-2011, 09:23 PM	#19
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: 6 cyl power steering Ok in regards to the ps pump and bracket that is left, is it missing a piece or is the alternator adjuster bracket there? Would like to see a pic of the lower front for the one that is left. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

10-25-2011, 09:29 PM	#20
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 6 cyl power steering all complete 6 cyl ps pump setups are sold, i have a couple other partial setups. thanks, Woody

10-25-2011, 09:59 PM	#21
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: 6 cyl power steering According to what I read in the posting you had a picture of two pumps for lockdoc and prathbun and prathbun passed leaving one pump. I was next to get in line so I assumed since you had one pump..... Well anyway do you have any more six cylinder bracket set ups? Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

10-25-2011, 10:22 PM	#23
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 6 cyl power steering sorry , the pic is about 4 mos. old. i still have the other pump, but the large cradle bracket has been cut

Register or Log In To remove these advertisements.