Has Anyone Tried the $158 eBay Stainless Steel Headers? - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aggie91 · 10-31-2011, 12:18 PM

Quote:

Originally Posted by crossy

many exhaust compnets are made of 409 grade SS not 304 or 316 so a magnet WILL stick to it. crossy

Exactly what I said in post #97.

I still do not have mine running but there are no issues at this point with these cheap headers...

InLimbo · 11-01-2011, 01:34 AM

Has anyone seen these on ebay recently? I am not very good at searches.

Gyawo · 11-01-2011, 09:04 AM

http://www.ebay.com/itm/NEW-Chevy-30...item588ce6ec12

notyo_cheez · 11-01-2011, 09:21 AM

Searched for speeddaddy.com, long tubes sell for $199 all day long. Thinking about it...

aggie91 · 11-01-2011, 05:19 PM

http://www.ebay.com/itm/CHEVY-PONTIA...item2a153f78a7

here is a current listing for stainless headers....

spudz · 11-01-2011, 05:40 PM

Yeah but they dont have any of the 73-87 truck long tube stainless headers anymore

1985-GMC · 11-01-2011, 10:43 PM

Quote:

Originally Posted by 1985-GMC

Does anyone see the truck headers anymore? I found these that are said to be corvette headers but they look pretty much the same. http://cgi.ebay.com/ebaymotors/ws/eB...tchlink:top:en

No but look at these, they look just like the truck ones.

BigRed76 · 11-02-2011, 12:46 AM

Saw it earlier in the thread, but want to verify...why does header wrap ruin headers?
I've never used it but considered it one time...

Your41Plague12 · 11-02-2011, 01:38 AM

Header wrap will keep things cooler under the hood, but it will also trap condensation against your headers and rot them out quicker. It's just a gimmick if you ask me. If you're concerned about the plug wires burning up, either route them accordingly using wire looms or use some of the individual tubular pieces of header wrap and run the spark plugs through them. It won't look pretty, but it will work.

BigRed76 · 11-03-2011, 01:56 AM

Ok that makes sense about the header wrap. I was told once that the wrap would trap more heat in the exhaust increasing the headers efficiency

FatBud89 · 01-09-2012, 09:09 PM

I just ordered a set of coated headers off eBay they where about 215.00 with shipping. They say they will fit angle plug heads. I will let you know how it works out when I get them... Budd
Posted via Mobile Device

bondo510 · 01-09-2012, 09:50 PM

I had some from e bay for 150 shipped and they were better than my 350. headman ones. The headmans were junk! The e bay were on my suburban for 7 years and are still on it now with no problems! The only problem was I had to change my dipstick to get them to work,

FatBud89 · 01-09-2012, 10:26 PM

My main concern is getting them to fit with the angle plugs. I know lots of guys on here have the hooker super comps. I will post some pictures when I get them on.... Budd
Posted via Mobile Device

stroker87 · 01-10-2012, 12:00 AM

I had a set of JBA stainless shorty headers ($650 bucks) they discolored just like the ones in the pics in the topic!

1985-GMC · 01-16-2012, 12:31 AM

I can't find these on ebay anymore but I think I found them on this website: http://www.jdmcenter.com/product.htm...c5-k5-jimmy-v8

hotrod_991 · 01-16-2012, 12:04 PM

I might just try thies ones out. for the price not really too much of a risk.

hotrod_991 · 01-17-2012, 06:58 PM

just checked the BBB and the alert says the company is outa business, tried to call and got "call cannot be completed at this time...

1985-GMC · 01-17-2012, 11:35 PM

Well I wouldn't give two hoots what the BBB has to say about any company, you have to pay them money to be on their list of "good" business's. Your better off with a google search.

hotrod_991 · 01-18-2012, 10:36 AM

I will try and call the company again today and google them aswell.

nobull2 · 01-18-2012, 11:12 AM

http://www.ebay.com/itm/110807378615...84.m1423.l2649

what do you guys think about these?

hotrod_991 · 01-18-2012, 01:29 PM

those are for 88 and up, dont know if they would work for 73-87 trucks

1BadAction · 02-27-2012, 12:44 PM

Nary a cheep big block header in sight

MilkyJoe · 02-27-2012, 01:06 PM

I may pick up a set-they look great IMO and the price definetly helps

my stock manifolds keep leaking, out with the old in with the new

RICHARD MORGAN · 11-03-2012, 10:23 PM

Just found this thread! These seem like a great deal! Has anyone tried the headers below on a 1972 K10?

http://speed-daddy.com/index.php/hea...5-k10-k15.html

VA72C10 · 11-03-2012, 11:05 PM

I don't know about the K10 but I found a set of these here for 149 shipped...they are 165.49 shipped now but that's still SUPER cheap for ceramic coated....

http://www.ebay.com/itm/NEW-Mid-Leng...4dd98d&vxp=mtr

I had to modify my sbc motor mounts and slightly clearance the frame on the passenger side for them to fit, but I've also heard 73-up mounts will work with no mods and those are available for cheap in salvage yards...

11-01-2011, 01:34 AM	#102
InLimbo Registered User Join Date: Oct 2010 Location: Charleston, SC Posts: 34	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Has anyone seen these on ebay recently? I am not very good at searches.

11-01-2011, 09:04 AM	#103
Gyawo Registered User Join Date: Dec 2010 Location: Alberta Posts: 165	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? http://www.ebay.com/itm/NEW-Chevy-30...item588ce6ec12

11-01-2011, 09:21 AM	#104
notyo_cheez Registered User Join Date: Apr 2011 Location: corpus christi, tx - america's fattest city Posts: 253	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Searched for speeddaddy.com, long tubes sell for $199 all day long. Thinking about it...

11-01-2011, 05:19 PM	#105
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? http://www.ebay.com/itm/CHEVY-PONTIA...item2a153f78a7 here is a current listing for stainless headers.... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

11-01-2011, 05:40 PM	#106
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Yeah but they dont have any of the 73-87 truck long tube stainless headers anymore __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

11-02-2011, 12:46 AM	#108
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Saw it earlier in the thread, but want to verify...why does header wrap ruin headers? I've never used it but considered it one time... __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

11-02-2011, 01:38 AM	#109
Your41Plague12 Registered User Join Date: Dec 2010 Location: Pittsburgh, PA Posts: 1,009	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Header wrap will keep things cooler under the hood, but it will also trap condensation against your headers and rot them out quicker. It's just a gimmick if you ask me. If you're concerned about the plug wires burning up, either route them accordingly using wire looms or use some of the individual tubular pieces of header wrap and run the spark plugs through them. It won't look pretty, but it will work. __________________ Steve Member of the Foot Pedal Club '83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL, Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws, 350 HP 350 crate engine from Jegs, Turbo 400

11-03-2011, 01:56 AM	#110
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Ok that makes sense about the header wrap. I was told once that the wrap would trap more heat in the exhaust increasing the headers efficiency __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

01-09-2012, 09:09 PM	#111
FatBud89 Registered User Join Date: May 2011 Location: Aynor, SC Posts: 4	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I just ordered a set of coated headers off eBay they where about 215.00 with shipping. They say they will fit angle plug heads. I will let you know how it works out when I get them... Budd Posted via Mobile Device

01-09-2012, 09:50 PM	#112
bondo510 Registered User Join Date: Jun 2011 Location: Sonora CA Posts: 238	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I had some from e bay for 150 shipped and they were better than my 350. headman ones. The headmans were junk! The e bay were on my suburban for 7 years and are still on it now with no problems! The only problem was I had to change my dipstick to get them to work,

01-09-2012, 10:26 PM	#113
FatBud89 Registered User Join Date: May 2011 Location: Aynor, SC Posts: 4	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? My main concern is getting them to fit with the angle plugs. I know lots of guys on here have the hooker super comps. I will post some pictures when I get them on.... Budd Posted via Mobile Device

01-10-2012, 12:00 AM	#114
stroker87 Registered User Join Date: Nov 2011 Location: Chicago, IL Posts: 321	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I had a set of JBA stainless shorty headers ($650 bucks) they discolored just like the ones in the pics in the topic!

01-16-2012, 12:31 AM	#115
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I can't find these on ebay anymore but I think I found them on this website: http://www.jdmcenter.com/product.htm...c5-k5-jimmy-v8 __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

01-16-2012, 12:04 PM	#116
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I might just try thies ones out. for the price not really too much of a risk. __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

01-17-2012, 06:58 PM	#117
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? just checked the BBB and the alert says the company is outa business, tried to call and got "call cannot be completed at this time... __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint



Register or Log In To remove these advertisements.

01-17-2012, 11:35 PM	#118
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Well I wouldn't give two hoots what the BBB has to say about any company, you have to pay them money to be on their list of "good" business's. Your better off with a google search. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

01-18-2012, 10:36 AM	#119
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I will try and call the company again today and google them aswell. __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

01-18-2012, 11:12 AM	#120
nobull2 Registered User Join Date: Mar 2011 Location: alpena ar Posts: 134	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? http://www.ebay.com/itm/110807378615...84.m1423.l2649 what do you guys think about these?

01-18-2012, 01:29 PM	#121
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? those are for 88 and up, dont know if they would work for 73-87 trucks __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

02-27-2012, 12:44 PM	#122
1BadAction Registered User Join Date: Dec 2010 Location: Dallas, TX Posts: 160	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Nary a cheep big block header in sight __________________ 2010 Basalt Black Porsche Cayenne GTS - Daily driver 1991 2500 Suburban, Black - 454/80E tow monster, soon to go under the knife... Again. 1979 16' Action Marine/"Johnny Cash" Merc Bridgeport Champ Motor - Metalflake Maniac

02-27-2012, 01:06 PM	#123
MilkyJoe Registered User Join Date: Oct 2011 Location: Fort Knox, Kentucky Posts: 91	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I may pick up a set-they look great IMO and the price definetly helps my stock manifolds keep leaking, out with the old in with the new

11-03-2012, 10:23 PM	#124
RICHARD MORGAN Registered User Join Date: Jan 2004 Location: HERNDON VA Posts: 216	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? Just found this thread! These seem like a great deal! Has anyone tried the headers below on a 1972 K10? http://speed-daddy.com/index.php/hea...5-k10-k15.html

11-03-2012, 11:05 PM	#125
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Has Anyone Tried the $158 eBay Stainless Steel Headers? I don't know about the K10 but I found a set of these here for 149 shipped...they are 165.49 shipped now but that's still SUPER cheap for ceramic coated.... http://www.ebay.com/itm/NEW-Mid-Leng...4dd98d&vxp=mtr I had to modify my sbc motor mounts and slightly clearance the frame on the passenger side for them to fit, but I've also heard 73-up mounts will work with no mods and those are available for cheap in salvage yards... __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.