NY Parting a '72 Blazer 4x4 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sam302psu · 12-01-2011, 08:39 AM

Do you still have either of the tops?

ORANGBLAZ · 12-01-2011, 01:47 PM

Quote:

Originally Posted by 47thriftmaster

Chuck,
These wheels still around? Is there any pitting on the fronts/face and are the valve stem holes good? I'm not having much luck finding a set of two with the correct BS. I need a clean set to match my other three. I know you sent close up pics, but I can't find them, would you mind sending them again? Thanks, Monte

Hey Monte, Yes, I still have these. I will get you some more pics this w/e. The valve stem holes are perfect. I had said before that there is minimal pitting on these because there are some rust spots. I think they will blast up nice. One still appears to have original paint on the inside, where they are usually rusty.

ORANGBLAZ · 12-01-2011, 01:49 PM

Quote:

Originally Posted by sam302psu

Do you still have either of the tops?

The one from the parts truck broke taking it off. If u want to fix it, u can have it.

sam302psu · 12-01-2011, 07:48 PM

How did it break? Could you take a picture?

**1970greenc10** · 12-04-2011, 08:08 PM

Do you still have the rear hangers and shock mounts?
Thanks,Marty

ORANGBLAZ · 12-05-2011, 04:54 PM

Quote:

Originally Posted by 1970greenc10

Do you still have the rear hangers and shock mounts?
Thanks,Marty

Yes I do Marty. I've been having a difficult time getting these trucks to the shop. Everyone who was going to pick these up has bagged me. Supposedly set for this coming w/e, but not getting my hopes up. (Probably would have been easier to fix my truck and put it back on the road...!)

I will let you know. Thanks-Chuck

freakshow108 · 12-11-2011, 01:40 AM

Do you still have the long tie rod bar? If so I am interested. Thanks. Also do you have any tow hooks?

ORANGBLAZ · 12-11-2011, 09:46 PM

Quote:

Originally Posted by freakshow108

Do you still have the long tie rod bar? If so I am interested. Thanks. Also do you have any tow hooks?

Tie Rod yes, but it's a little bent.
Tow hooks no, but sure wish I did!

freakshow108 · 12-11-2011, 10:38 PM

Any chance you could post a pic, i have one and it is also bent, if yours is not to bad maybe we can make a deal. Thanks

ORANGBLAZ · 12-12-2011, 06:17 PM

Quote:

Originally Posted by freakshow108

Any chance you could post a pic, i have one and it is also bent, if yours is not to bad maybe we can make a deal. Thanks

Sure, I can get u a pic tomorrow morning. Thanks-Chuck

ORANGBLAZ · 12-12-2011, 06:18 PM

Quote:

Originally Posted by sam302psu

How did it break? Could you take a picture?

I can post a pic this weekend. Thanks-Chuck

ORANGBLAZ · 12-14-2011, 06:10 PM

Quote:

Originally Posted by freakshow108

Any chance you could post a pic, i have one and it is also bent, if yours is not to bad maybe we can make a deal. Thanks

Its got a pretty good bend in it. I may have a better one, but can't check until this w/e.

Name: 030.jpg
Views: 237
Size: 43.2 KB

freakshow108 · 12-14-2011, 06:29 PM

That one is worse than mine so I will pass, thanks for the pic, i will wait for your next pic, thanks .

nickmac45 · 12-22-2011, 01:45 PM

Is the rear bench seat and brackets still available? If so what would it be to ship to 78681? Thanks Nick.

*mrdana60* · 12-22-2011, 03:49 PM

is the frame still avail ? could use the spring hangers if so

ORANGBLAZ · 12-22-2011, 08:05 PM

Quote:

Originally Posted by nickmac45

Is the rear bench seat and brackets still available? If so what would it be to ship to 78681? Thanks Nick.

Yes it is. I will get a quote from Greyhound as soon as I can. Chuck

ORANGBLAZ · 12-22-2011, 08:05 PM

Quote:

Originally Posted by mrdana60

is the frame still avail ? could use the spring hangers if so

I have a couple of frames. Which hangers do you need?

*mrdana60* · 12-22-2011, 08:19 PM

need the 4 rear spring hangers. or whatever will work on a 69-72 chevy 2wd frame with rear coil springs

ORANGBLAZ · 12-22-2011, 09:13 PM

Not sure if the 4x4s are the same as the 2wd, but I do have a nice 2wd frame w/ leaf springs. How's $50 plus shipping.

*mrdana60* · 12-22-2011, 09:15 PM

well i have some 2wd leaf spring hangers. but wanted the 4wd hangers cause they drop down farther

ORANGBLAZ · 12-22-2011, 09:37 PM

Quote:

Originally Posted by mrdana60

well i have some 2wd leaf spring hangers. but wanted the 4wd hangers cause they drop down farther

No problem, got them too.

*mrdana60* · 12-22-2011, 10:07 PM

can you send some pics of them?

ORANGBLAZ · 12-23-2011, 04:49 PM

Quote:

Originally Posted by mrdana60

can you send some pics of them?

Here you go. They are a little pitted (they are 40 years old) but structurally fine. Just blast and install. LMK Chuck

Name: 001.jpg
Views: 193
Size: 48.4 KB

*mrdana60* · 12-23-2011, 04:54 PM

trade for some good 2wd hangers ? lol

ORANGBLAZ · 12-23-2011, 05:30 PM

Quote:

Originally Posted by mrdana60

trade for some good 2wd hangers ? lol

Don't really need 'em, but thanks. What else ya got?

12-01-2011, 08:39 AM	#101
sam302psu Registered User Join Date: Nov 2011 Location: Chambersburg, PA Posts: 12	Re: Parting a '72 Blazer 4x4 Do you still have either of the tops?

12-01-2011, 07:48 PM	#104
sam302psu Registered User Join Date: Nov 2011 Location: Chambersburg, PA Posts: 12	Re: Parting a '72 Blazer 4x4 How did it break? Could you take a picture?

12-04-2011, 08:08 PM	#105
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: Parting a '72 Blazer 4x4 Do you still have the rear hangers and shock mounts? Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

12-11-2011, 01:40 AM	#107
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting a '72 Blazer 4x4 Do you still have the long tie rod bar? If so I am interested. Thanks. Also do you have any tow hooks?

12-11-2011, 10:38 PM	#109
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting a '72 Blazer 4x4 Any chance you could post a pic, i have one and it is also bent, if yours is not to bad maybe we can make a deal. Thanks

12-14-2011, 06:29 PM	#113
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting a '72 Blazer 4x4 That one is worse than mine so I will pass, thanks for the pic, i will wait for your next pic, thanks .

12-22-2011, 01:45 PM	#114
nickmac45 Registered User Join Date: Nov 2010 Location: Round Rock, TX Posts: 5	Re: Parting a '72 Blazer 4x4 Is the rear bench seat and brackets still available? If so what would it be to ship to 78681? Thanks Nick. __________________ 1971 K5, 350 transplant w/ Q-jet carb (TBI conversion in the works), 33x12.50 R15's, Headers to Cherry bombs, NP205, Dana 44 upfront, 10 bolt rear...tear down & stripping the body for new paint.

12-22-2011, 03:49 PM	#115
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: Parting a '72 Blazer 4x4 is the frame still avail ? could use the spring hangers if so

12-22-2011, 08:19 PM	#118
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: Parting a '72 Blazer 4x4 need the 4 rear spring hangers. or whatever will work on a 69-72 chevy 2wd frame with rear coil springs

12-22-2011, 09:13 PM	#119
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Not sure if the 4x4s are the same as the 2wd, but I do have a nice 2wd frame w/ leaf springs. How's $50 plus shipping.

12-22-2011, 09:15 PM	#120
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: Parting a '72 Blazer 4x4 well i have some 2wd leaf spring hangers. but wanted the 4wd hangers cause they drop down farther

12-22-2011, 10:07 PM	#122
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: Parting a '72 Blazer 4x4 can you send some pics of them?

12-23-2011, 04:54 PM	#124
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: Parting a '72 Blazer 4x4 trade for some good 2wd hangers ? lol



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.