IN Wood Bed front rail - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 12-21-2011, 12:46 AM

Quote:

Originally Posted by HeavyMetalChevy

Not really... The closest Greyhound is about 1.5 hrs. from me but I have been to the Indianapolis (where I was born and raised) and the Louisville one as well... It is actually cheaper to ship these UPS because they are thin and flat... Greayhound is best for doors, fenders, inner fenders, and such...

Ok, see if you get a quote for shipping.....19454 north wales, pa

HeavyMetalChevy · 12-21-2011, 01:04 AM

Quote:

Originally Posted by jaros44sr

Ok, see if you get a quote for shipping.....19454 north wales, pa

$34.38 via UPS... I will do $130 shipped.. It will be blasted as well!

Greyhound was $74.10 to Norristown hub!!!!!!!!!!!!!!! WOW!!!!!!!

**jaros44sr** · 12-21-2011, 01:43 AM

Quote:

Originally Posted by HeavyMetalChevy

$34.38 via UPS... I will do $130 shipped.. It will be blasted as well!

Greyhound was $74.10 to Norristown hub!!!!!!!!!!!!!!! WOW!!!!!!!

Wow, that sounds cheap, are you sure of the shipping costs. Hold off on the blasting until i see pics, i dont like bare metal sitting around here

HeavyMetalChevy · 12-21-2011, 02:04 AM

Quote:

Originally Posted by jaros44sr

Wow, that sounds cheap, are you sure of the shipping costs. Hold off on the blasting until i see pics, i dont like bare metal sitting around here

Oh I can lay a thin coat of primer on it if you are worried about flash rust... And lol on "sure of shipping cost"... I ship 100's of parts monthly... I can pretty much quote prices now without even going to the shipping sites just by weight and dimensions... i always double check though... I will have the bed broke down tomorrow and have pics...

**jaros44sr** · 12-21-2011, 11:17 AM

Quote:

Originally Posted by HeavyMetalChevy

Oh I can lay a thin coat of primer on it if you are worried about flash rust... And lol on "sure of shipping cost"... I ship 100's of parts monthly... I can pretty much quote prices now without even going to the shipping sites just by weight and dimensions... i always double check though... I will have the bed broke down tomorrow and have pics...

Great, yeah, i was worried about flash! Just thought that quote sounded cheap

HeavyMetalChevy · 12-21-2011, 01:40 PM

Quote:

Originally Posted by jaros44sr

Great, yeah, i was worried about flash! Just thought that quote sounded cheap

I can raise the shipping for you if it's too cheap???? lmao just kidding...I will get some pics today...

**jaros44sr** · 12-21-2011, 03:35 PM

Quote:

Originally Posted by HeavyMetalChevy

I can raise the shipping for you if it's too cheap???? lmao just kidding...I will get some pics today...

Uh Oh, holiday lights and candy canes are up..... Just trying to CYA, price is fine

Happy Holidays to you and yours, and thank you for providing parts for us

HeavyMetalChevy · 12-21-2011, 06:26 PM

Quote:

Originally Posted by jaros44sr

Uh Oh, holiday lights and candy canes are up..... Just trying to CYA, price is fine

Happy Holidays to you and yours, and thank you for providing parts for us

cool man... did not get it off today... was tied up tearing into frame still I hae some already stored though coming up for you

HeavyMetalChevy · 12-21-2011, 06:41 PM

pics of other front rail

jaros44sr...see how great shape and ding free top rail is... very nice

The inside pics make it look ugly but no pit and metal rot... just scratched up and will be new when blasted..

HeavyMetalChevy · 12-21-2011, 06:45 PM

closer inside pics...again not all dented and gouged or creased just many paint scratches... Will be uniform and tip top after blast..

CP1010 · 12-21-2011, 06:55 PM

just got e-mail from pay pal funds expected clearing dec 27th.If you can give me your info so i can send payment when it clears thanks.

**Tim Christian** · 12-21-2011, 06:56 PM

How much for the pooltable?

HeavyMetalChevy · 12-21-2011, 07:05 PM

Quote:

Originally Posted by Tim Christian

How much for the pooltable?

Ah man..... Not that!!! I was hoping we were going to break the ice on some parts Tim!

That is my baby... That is probably the last thing in the entire garage I would sell... It is like brand new... Got it "Storage War" style if that tells you anything... But.... money talks... how would you get it??? lol

**Tim Christian** · 12-21-2011, 07:22 PM

My Dad owned and operated a Amusment company for over 30 years. I would like to have a quater for everyone I moved or recovered! LOL! Brings back good memories of my Dad!

HeavyMetalChevy · 12-21-2011, 07:28 PM

Quote:

Originally Posted by CP1010

just got e-mail from pay pal funds expected clearing dec 27th.If you can give me your info so i can send payment when it clears thanks.

wow... that's quite some time...it is usually 2-3 days... would have benn better off sending a money order I suppose... no worries... You an jaro the only ones that have really shown interest so just let me know.

HeavyMetalChevy · 12-21-2011, 07:31 PM

Quote:

Originally Posted by Tim Christian

My Dad owned and operated a Amusment company for over 30 years. I would like to have a quater for everyone I moved or recovered! LOL! Brings back good memories of my Dad!

That is really cool! So you guys supplied arcade games, jukeboxes, and pool tables and such for places like bars, bowling alleys, etc. I know a little about the business... Di you service them as well?

**Tim Christian** · 12-21-2011, 07:39 PM

Yes we had them everywere. Actually worked around 15 people at one time. Was one of if not the largest in East Tennessee

**jaros44sr** · 12-21-2011, 08:57 PM

Quote:

Originally Posted by HeavyMetalChevy

closer inside pics...again not all dented and gouged or creased just many paint scratches... Will be uniform and tip top after blast..

Does it look strait across the top and bottom, what color is it, green or blue? Thanks for the pics

HeavyMetalChevy · 12-21-2011, 09:20 PM

Quote:

Originally Posted by jaros44sr

Does it look strait across the top and bottom, what color is it, green or blue? Thanks for the pics

It is custom factory turquoise color... I will be blasting it for you though... It is straight or I would not even offer it.. .Can not get that angle because the bed is on its side like mentioned and it is also stuck between a rock and a hard place at the moment... the rock being the truck frame and the hard place being the chest freezer and shop wall it is leaning against... lol... It will be straight. I should have it off tomorrow.. I just hate going through all the trouble to break a bed down if someone does not end up wanting it... I would rather just take the whole be to scrap if that is the case... I assure you the front rail will be like brand new when done...

**jaros44sr** · 12-22-2011, 01:23 AM

Quote:

Originally Posted by HeavyMetalChevy

It is custom factory turquoise color... I will be blasting it for you though... It is straight or I would not even offer it.. .Can not get that angle because the bed is on its side like mentioned and it is also stuck between a rock and a hard place at the moment... the rock being the truck frame and the hard place being the chest freezer and shop wall it is leaning against... lol... It will be straight. I should have it off tomorrow.. I just hate going through all the trouble to break a bed down if someone does not end up wanting it... I would rather just take the whole be to scrap if that is the case... I assure you the front rail will be like brand new when done...

Great, will be in touch mon. tues

Thanks again for your help with this part

**jaros44sr** · 12-27-2011, 11:55 PM

paypal sent....

HeavyMetalChevy · 12-28-2011, 02:33 AM

Both sold... Thanks guys... Happy new year!

12-21-2011, 06:41 PM	#34
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Wood Bed front rail pics of other front rail jaros44sr...see how great shape and ding free top rail is... very nice The inside pics make it look ugly but no pit and metal rot... just scratched up and will be new when blasted.. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-21-2011, 06:45 PM	#35
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Wood Bed front rail closer inside pics...again not all dented and gouged or creased just many paint scratches... Will be uniform and tip top after blast.. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-21-2011, 06:55 PM	#36
CP1010 Registered User Join Date: Jan 2010 Location: bloomer,wisconsin Posts: 22	Re: Wood Bed front rail just got e-mail from pay pal funds expected clearing dec 27th.If you can give me your info so i can send payment when it clears thanks.

12-21-2011, 06:56 PM	#37
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,389	Re: Wood Bed front rail How much for the pooltable?

12-21-2011, 07:22 PM	#39
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,389	Re: Wood Bed front rail My Dad owned and operated a Amusment company for over 30 years. I would like to have a quater for everyone I moved or recovered! LOL! Brings back good memories of my Dad!

12-21-2011, 07:39 PM	#42
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,389	Re: Wood Bed front rail Yes we had them everywere. Actually worked around 15 people at one time. Was one of if not the largest in East Tennessee

12-27-2011, 11:55 PM	#46
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,841	Re: Wood Bed front rail paypal sent.... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-28-2011, 02:33 AM	#47
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Wood Bed front rail Both sold... Thanks guys... Happy new year! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.