engine covers/ swfabrication

[themb2g]

Does anyone know where to get custom engine covers? i checked LS1tech.com and there was a previous vendor "SWFabrication" that was making them, but is now MIA. I have an LQ4 with a F.A.S.T. intake in my 72 blazer and I am looking to do something custom to the cover. Any ideas? Thanks!

MB

[BR3W CITY]

Do you need "Car" style side covers or the "truck" style top/side covers?

there are a couple companies I've seen that do some custom ones for the vettes and gto.
I haven't seen any custom covers for the truck engine, except ones that people make themselves.

[themb2g]

Sorry, I forgot to specify. I have the truck set up and intake manifold. The intake manifold is huge.
Posted via Mobile Device

[BR3W CITY]

For the truck manifolds I can only think of these;
Early truck square top cover only
"Vortec 5300" truck with side covers
"Vortec 6000" truck with side covers
"Vortec Max" truck with side covers
Cadillac top cover with same side covers
I don't remember a 4800 cover but there might be one.
I have part #'s for some, but if you check the larger OE sellers online, they usually have them for sale. I think my 3 piece "max" cover cost ~$100-115 when ordered all together.

[themb2g]

I wonder if someone with some fiberglass skills could just modify one of those, or just outright make one. thanks!

[BR3W CITY]

It would be very easy to modify one. Depending what you want to do that is.
If you have a friend with one, you could use his as a mold with some release agent or foil etc, and build a full custom one.
Do it. now.

[themb2g]

Im going to have to ask around. first step, finding someone who is good with glass. Thanks!

[BR3W CITY]

DIY dude. Fiberglass isn't hard, just time intensive. Unless you've got a friend who does it, you'll probably end up paying way too much for it. No one wants a $350 engine cover (at least I don't think).

If you grab some resin and fiberglass mat and weave from the autoparts store, along with some stuff like foil, brushes etc...you MIGHT spend $90. If you ever did paper machete as a kid, you can do fiberglass. I can walk you through a bit more, if its something you decide to do.

[Custom 68]

ok maybe I am confused but if you have a FAST intake I dont think that was meant to be covered. Saying that you can do what ever you want as it is your project but a high dollar aftermarket intake is normally something folks are proud of. That being said there wont be one that will just "bolt" on to that intake.
If you have the stock truck one then like said above there are a couple options that can be modified or painted or what ever.
Good luck
Dave

[themb2g]

Yeh, i meant to specify more of the coil cover section, rather than a full engine cover. I dont plan on covering the FAST intake.

[BR3W CITY]

Ok...then you don't have the truck manifold as I asked. The FAST setup is the car style. If thats the case then the corvette style side covers are what you are looking for. They come in a few styles, and a couple companies make "custom" ones.

[usmcchevy]

FAST makes a "truck" intake. Is this the one you have?

http://www.jegs.com/i/Comp-Cams/249/...ductId=1264059

[Shon]

there are no provisions on the FAST intakes for covers as the GM units have for their fugly intake. but if you are wanting coil covers then there are plenty of choices out there. Heck, the shop that does my custom machined parts is doing coil covers for mustangs and asking me if I want to do some LS stuff....

[themb2g]

Yeah its the LSXRT manifold. Shon - What is the shops name?

[themb2g]

Originally Posted by usmcchevy

FAST makes a "truck" intake. Is this the one you have?

http://www.jegs.com/i/Comp-Cams/249/...ductId=1264059

Man i am glad i got mine for a lot less than that!

[Shon]

Originally Posted by themb2g

Yeah its the LSXRT manifold. Shon - What is the shops name?

I have a local shop that does the work for me, called Buffalo Machine.

Originally Posted by themb2g

Man i am glad i got mine for a lot less than that!

OH yes, I sale them for less than that! I woudl like to ship them for $900.

[usmcchevy]

Originally Posted by themb2g

Man i am glad i got mine for a lot less than that!

Crap, I never even saw the price when I posted that link!

[Shon]

still cheaper and less hassle than going to a car intake....

[BR3W CITY]

I didn't see the seperate truck version when I was poking around, cool piece but I know Shon has that stuff for a pretty good price.

[themb2g]

Originally Posted by Shon

I have a local shop that does the work for me, called Buffalo Machine. Thanks!



OH yes, I sale them for less than that! I woudl like to ship them for $900.

Yeah i got mine for $911 shipped.