Canada WTB: heat stove for V8 350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1979 GMC Sierra · 01-19-2012, 06:03 PM

Looking for a heat stove for a V8 350 engine. Thanks,

Travis

RandyP · 01-20-2012, 08:37 AM

You talking about the pipe between the manifold and the air cleaner? If so, solid pipe or flexible, depends on the year of the air cleaner I believe.

1979 GMC Sierra · 01-20-2012, 05:38 PM

Yes, that's what i'm looking for...the pipe that sucks heat from the exhaust manifold and sends it through the air cleaner to warm up the carburetor. I believe it's a solid pipe...but if there's a flexible one that will work for a 350 engine, then i could use it as well. I may have to get something made as a substitute, cause i don't think many people have this part. It rots off, and isn't a necessity...and rebuilt engines don't come with a heat stove. It just helps to have it if you live in a cold climate. I was just hoping someone had one by chance.

madcow75 · 01-20-2012, 08:08 PM

The local parts stores used to allways have them in stock. Check uap, the should be able to help you. They are usually in the HELP parts.

BLE 'BURBAN · 01-20-2012, 11:12 PM

2" i.d. carb pre-heater hose and at least one hose clamp yo either hold it to the riser on the manifold(that's where mines at) or to the down pipe on the bottom of the snorkel

classicchev · 01-22-2012, 02:07 PM

pic would help. I have a few, just want to hone the search a little..

01-19-2012, 06:03 PM	#1
1979 GMC Sierra Registered User Join Date: Nov 2010 Location: Niagara, Ontario Posts: 268	WTB: heat stove for V8 350 Looking for a heat stove for a V8 350 engine. Thanks, Travis __________________ 1979 GMC Sierra 3/4 ton Camper Special 1976 Chevy Cheyenne 3/4 ton

01-20-2012, 08:37 AM	#2
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: WTB: heat stove for V8 350 You talking about the pipe between the manifold and the air cleaner? If so, solid pipe or flexible, depends on the year of the air cleaner I believe. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

01-20-2012, 05:38 PM	#3
1979 GMC Sierra Registered User Join Date: Nov 2010 Location: Niagara, Ontario Posts: 268	Re: WTB: heat stove for V8 350 Yes, that's what i'm looking for...the pipe that sucks heat from the exhaust manifold and sends it through the air cleaner to warm up the carburetor. I believe it's a solid pipe...but if there's a flexible one that will work for a 350 engine, then i could use it as well. I may have to get something made as a substitute, cause i don't think many people have this part. It rots off, and isn't a necessity...and rebuilt engines don't come with a heat stove. It just helps to have it if you live in a cold climate. I was just hoping someone had one by chance. __________________ 1979 GMC Sierra 3/4 ton Camper Special 1976 Chevy Cheyenne 3/4 ton

01-20-2012, 08:08 PM	#4
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: WTB: heat stove for V8 350 The local parts stores used to allways have them in stock. Check uap, the should be able to help you. They are usually in the HELP parts.

01-20-2012, 11:12 PM	#5
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: WTB: heat stove for V8 350 2" i.d. carb pre-heater hose and at least one hose clamp yo either hold it to the riser on the manifold(that's where mines at) or to the down pipe on the bottom of the snorkel __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

01-22-2012, 02:07 PM	#6
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: WTB: heat stove for V8 350 pic would help. I have a few, just want to hone the search a little.. __________________ 67- 72 Parts collecter



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.