|
02-03-2012, 03:21 PM
|
#251 |
|
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: Not so budget 3-link build
Amazing! Everything is impressive, but one thing I really liked was how perfect the hole was for the roll cage in the sheet metal in this pic:
__________________
1970 2wd Blazer |
|
|
|
02-03-2012, 03:24 PM
|
#252 |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Another interesting project, I put a 302/T5 in a 73 Mercedes for a budget race car series. I skipped the part about mounting the engine at this point, because later he had me ditch the stock suspension and build some from scratch, which meant I redid it. But I made a small carb hat to keep everything under the stock hood. This car is definitely not my nicest work, since it was meant to be cheap and not detailed at all. But I did not cobble it together by any means.
                                            Got a new shop around this time...  Exhaust is a long story on this one. Initially I was going to build some tube headers for it, that would clear the steering box on the DS. Then the budget got cut down, and I was told to run stock cast manifolds. However they did not fit around the steering and would not work. So I was instructed to turn them around and make it work...   In an effort to make things equal the passenger side looks funny, but I got both sides within 2". Best I could do with the space.      Anti-rock link for the engine.  Painting...                  Videos from Police training yard. Will see if I can find the painted pictures. He painted it himself, with a brush.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
02-03-2012, 03:25 PM
|
#253 | |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Quote:
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
|
02-03-2012, 03:30 PM
|
#254 |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Here I lowered a Diesel Rabbit truck, a lot...
               He adjusted the coil overs down another 3/4" or so that weekend. That was as low as I could get it, and still get it off the lift. Even then, we had to lift up on the truck to pull the legs out. Only thing that fit under it was a small scissor jack.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
02-03-2012, 03:32 PM
|
#255 |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Here is some full stainless exhaust I did on the VW.
     There is so much more, a new shop truck for myself, a full frame build, IRS on a crew cab Nissan...but I will wait and upload those later on. Gotta get some work done today.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
02-03-2012, 04:42 PM
|
#256 |
|
PITbut
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
|
Re: Not so budget 3-link build
awesome
__________________
New project. 1971 Twin Turbo blazer http://67-72chevytrucks.com/vboard/s...d.php?t=676047 My new YOUTUBE channel.. Videos of my truck and a current walk around. Lyrikz74 Youtube channel DONE! SOLD!  My 1971 stepside build thread My Build Thread UPDATED 6/11. DONE and sold. |
|
|
|
|
02-03-2012, 05:09 PM
|
#257 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Re: Not so budget 3-link build
You do some pretty damn amazing work...
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
02-03-2012, 05:30 PM
|
#258 |
|
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: Not so budget 3-link build
Did you make this steering wheel too?!
__________________
1970 2wd Blazer |
|
|
|
|
02-03-2012, 08:24 PM
|
#259 |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
That we actually bought from Speedway Motors. But it would be a cheap way to get a steering wheel ring and make your own wheel. We went through about 3 steering wheels on this car.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
02-03-2012, 09:05 PM
|
#260 |
|
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: Not so budget 3-link build
That Bus is AWESOME! Gonna be a blast to drive.
Nate
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
|
|
|
|
02-04-2012, 04:10 AM
|
#261 |
|
Registered User
Join Date: Jul 2006
Location: the netherlands europe
Posts: 4,335
|
Re: Not so budget 3-link build
yup
its not the only fast van around here thats a transit van body on the chassis of a jaguar XJ220 or thats a transit van shell draped over a benneton ford formulla one chassis
__________________
i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts |
|
|
|
|
02-04-2012, 08:55 AM
|
#262 |
|
Senior Member
Join Date: May 2004
Location: johnstown, NY
Posts: 2,393
|
Re: Not so budget 3-link build
Love all the fab pics. Thanks for sharing. I love the idea with the valve mounting bar/extra air storage. Sweet idea!
Posted via Mobile Device |
|
|
|
|
02-04-2012, 02:11 PM
|
#263 | |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Quote:
I've also been asked to do another one potentially, with a more basic approach. Not mid-engine, but his idea is similar to the race taxi. Will be fun if that one comes through.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
|
02-04-2012, 05:00 PM
|
#264 |
|
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
|
Re: Not so budget 3-link build
Pretty impressive update, nice work as always
|
|
|
|
|
02-04-2012, 08:14 PM
|
#265 |
|
Registered User
Join Date: Aug 2008
Location: North GA
Posts: 400
|
Re: Not so budget 3-link build
Man you do awesome work!!
__________________
"Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress" |
|
|
|
|
02-05-2012, 05:42 PM
|
#266 |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Ok here is another one.
I'm sure most of you remember the D50 I did an air tank back half on. Well its back for a full build. The body was in pretty sad shape, door body work, 400 lbs dash full of bondo, suicide door that was impossible to line up, bad bodydrop. The front frame had been hacked up pretty much beyond repair, and under the cab it was showing signs of rusting through. So we got a donor truck.        Header is semi-tuned equal length. Disposing of the old... Bondo was over 3/4" thick on most of the dash.     Starting fresh, reusing the back half and arms I built.       Lathe in the background, circa 1945~ish.                                 Upper arm mounts are not done, they will be tied into the lower arm mount to make a clean multi purpose tab. Did not have time before the show.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
02-05-2012, 05:50 PM
|
#267 |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
More...
       Back window was an inside joke with the owner, since he had so many stickers on his window, and ti was already pitted. So we covered it in as many as we could find.  Before firewall was cut enough to slide the cab forward, but gives you an idea how much it will tuck, after cutting half the rockers off.  My truck next to it.  Making sure I got the wheelbase right, as I shortened it slightly to close the bed gap up a bit.   How it sits right now.  Got the motor to clear the stock hood, without cutting the bracing, and keeping the engine at a proper operating angle. I now have the engine out, so I can do the front frame horns (hard to make look good). Truck has a long way to go, and I will be back to working on it after I finish putting a custom Supra based IRS in a Nissan truck.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
02-05-2012, 05:54 PM
|
#268 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Re: Not so budget 3-link build
New chassis looks great I see your going r.h.d. with it..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
02-05-2012, 05:58 PM
|
#269 | |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Quote:
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
|
02-05-2012, 06:04 PM
|
#270 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Not so budget 3-link build
That frame is nice (I love the detail stuff).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
02-05-2012, 06:20 PM
|
#271 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Re: Not so budget 3-link build
Damn and I though only ernie marchias built d-50s
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
02-12-2012, 11:34 AM
|
#272 | |
|
Registered User
Join Date: Aug 2008
Location: atlanta GA
Posts: 73
|
Re: Not so budget 3-link build
Quote:
I also would be interested in a price on that wishbone L |
|
|
|
|
|
02-13-2012, 01:19 PM
|
#273 | |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Quote:
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
|
08-13-2012, 06:02 PM
|
#274 |
|
Registered User
Join Date: Nov 2008
Location: Windsor, CA
Posts: 500
|
Re: Not so budget 3-link build
Sorry I have not posted in ages, life has been a bit crazy!
               Doing a bunch of repairs on an 05 Corvette right now, and finishing up the back half on the green Nissan.
__________________
If you can find it cheaper, I can fix it! |
|
|
|
|
08-13-2012, 06:28 PM
|
#275 |
|
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
|
Re: Not so budget 3-link build
I love it when this thread is updated! Nice work as always!!!!!
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
