WA Blazer Leveling Mats - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bigb401 · 03-31-2012, 11:49 AM

So it looks like "thealien" then "47thriftmaster" and then (me) bigb401. Anyone else have some for sale?
Posted via Mobile Device

Tbruz · 03-31-2012, 12:04 PM

Looks like I'm passing on these.
Next up is thealien.
Tbruz

blessedfind · 03-31-2012, 01:26 PM

Tburz has passed on them. I sent him some pics (the new ones that I have posted on here) and after looking at them he has declined. The first pics that I posted were taken back in Jan. and I had not looked at them until I was packing them up for Tburz. There are some cracks in these here and there, but are still very solid to be 40 years old. The material I mentioned (looks white in the first pic) does clean off. You can see this in pic 2 where I cleaned an area with 409. I don't want anyone to get any hidden surprises.

blessedfind · 03-31-2012, 02:19 PM

Here is a pic of the top after I cleaned these up.

Tbruz · 03-31-2012, 04:05 PM

Back in line, behind bigb401.
tbruz

**Thealien** · 03-31-2012, 04:23 PM

still interesred if you find your other set. i'll pass on the cracked set. thanks

Bigb401 · 03-31-2012, 05:57 PM

Still interested if they get to me in line.
Posted via Mobile Device

blessedfind · 04-02-2012, 12:39 PM

these are sold

Truckseats · 04-02-2012, 06:14 PM

I thought I had another set somewhere. This set has been cut to accept the factory roll bar. This won't affect your footing area at all. This set is also very nice for 40 years old. $150 shipped in the lower 48.

junior43 · 04-02-2012, 09:26 PM

I would like to be in line for this set.
Posted via Mobile Device

Truckseats · 04-02-2012, 10:26 PM

Thealien, 47thriftmaster, Bigb401, and junior43. I believe this is the order.
Posted via Mobile Device

Bigb401 · 04-02-2012, 10:32 PM

I'm out. Ur in 3rd place junior
Posted via Mobile Device

47thriftmaster · 04-02-2012, 11:02 PM

Quote:

Originally Posted by Truckseats

Thealien, 47thriftmaster, Bigb401, and junior43. I believe this is the order.
Posted via Mobile Device

I will take them if it gets to me and now that I'm in Wa getting it will easier if it comes to that.

Bigb401 · 04-02-2012, 11:20 PM

Can registered users buy or do you gotta be a member?
Posted via Mobile Device

**Thealien** · 04-03-2012, 04:33 PM

I will take them as long as there are no cracks. They look good in the pictures. Either send me a paypal invoice or your payapal address.

Thanks
Mark

**too much stuff** · 04-03-2012, 05:49 PM

Quote:

Originally Posted by Bigb401

Can registered users buy or do you gotta be a member?
Posted via Mobile Device

Anyone can buy. Just need to be a member to sell.

Bigb401 · 04-03-2012, 05:54 PM

Oh ok. I was just wonderin.
Posted via Mobile Device

Truckseats · 04-04-2012, 01:52 PM

Quote:

Originally Posted by Thealien

I will take them as long as there are no cracks. They look good in the pictures. Either send me a paypal invoice or your payapal address.

Thanks
Mark

I will double check for cracks tonight. Thanks.

**Thealien** · 04-04-2012, 05:47 PM

Quote:

Originally Posted by Truckseats

I will double check for cracks tonight. Thanks.

Thanks, soon as I hear I will send payment.

tdkosta · 04-04-2012, 06:50 PM

Mats came today, thanks a bunch.
Posted via Mobile Device

tdkosta · 04-04-2012, 06:54 PM

I wonder if there are any cargo mats that have the right leveling pattern and can be trimmed to line the tub?

Quote:

Originally Posted by 72Blazerock

Sounds like a manufacturer could make some money reproducing
these.
Posted via Mobile Device

Posted via Mobile Device

Truckseats · 04-04-2012, 08:27 PM

Quote:

Originally Posted by Thealien

Thanks, soon as I hear I will send payment.

I can't find any cracks in them. For as old as they are the rubber still looks really good on this set.
Posted via Mobile Device

**Thealien** · 04-04-2012, 09:11 PM

pm sent regarding payment info, want to send payment asap. wont be online until tomorrow evening.

Truckseats · 04-04-2012, 09:43 PM

Payment received. Thank you.
Posted via Mobile Device

**Blazerowner** · 04-11-2013, 04:06 AM

If anyone has a set of these I'm interested.

03-31-2012, 11:49 AM	#26
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Blazer Leveling Mats So it looks like "thealien" then "47thriftmaster" and then (me) bigb401. Anyone else have some for sale? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-31-2012, 12:04 PM	#27
Tbruz Registered User Join Date: Feb 2010 Location: Windham, NH Posts: 226	Re: Blazer Leveling Mats Looks like I'm passing on these. Next up is thealien. Tbruz

03-31-2012, 01:26 PM	#28
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: Blazer Leveling Mats Tburz has passed on them. I sent him some pics (the new ones that I have posted on here) and after looking at them he has declined. The first pics that I posted were taken back in Jan. and I had not looked at them until I was packing them up for Tburz. There are some cracks in these here and there, but are still very solid to be 40 years old. The material I mentioned (looks white in the first pic) does clean off. You can see this in pic 2 where I cleaned an area with 409. I don't want anyone to get any hidden surprises. Attached Images

03-31-2012, 02:19 PM	#29
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: Blazer Leveling Mats Here is a pic of the top after I cleaned these up. Attached Images

03-31-2012, 04:05 PM	#30
Tbruz Registered User Join Date: Feb 2010 Location: Windham, NH Posts: 226	Re: Blazer Leveling Mats Back in line, behind bigb401. tbruz

03-31-2012, 04:23 PM	#31
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Blazer Leveling Mats still interesred if you find your other set. i'll pass on the cracked set. thanks __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

03-31-2012, 05:57 PM	#32
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Blazer Leveling Mats Still interested if they get to me in line. Posted via Mobile Device __________________ Proud to be IBEW Local 2150

04-02-2012, 12:39 PM	#33
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: Blazer Leveling Mats these are sold

04-02-2012, 06:14 PM	#34
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: Blazer Leveling Mats I thought I had another set somewhere. This set has been cut to accept the factory roll bar. This won't affect your footing area at all. This set is also very nice for 40 years old. $150 shipped in the lower 48. Attached Images

04-02-2012, 09:26 PM	#35
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Re: Blazer Leveling Mats I would like to be in line for this set. Posted via Mobile Device

04-02-2012, 10:26 PM	#36
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: Blazer Leveling Mats Thealien, 47thriftmaster, Bigb401, and junior43. I believe this is the order. Posted via Mobile Device

04-02-2012, 10:32 PM	#37
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Blazer Leveling Mats I'm out. Ur in 3rd place junior Posted via Mobile Device __________________ Proud to be IBEW Local 2150

04-02-2012, 11:20 PM	#39
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Blazer Leveling Mats Can registered users buy or do you gotta be a member? Posted via Mobile Device __________________ Proud to be IBEW Local 2150

04-03-2012, 04:33 PM	#40
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Blazer Leveling Mats I will take them as long as there are no cracks. They look good in the pictures. Either send me a paypal invoice or your payapal address. Thanks Mark __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

04-03-2012, 05:54 PM	#42
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Blazer Leveling Mats Oh ok. I was just wonderin. Posted via Mobile Device __________________ Proud to be IBEW Local 2150



Register or Log In To remove these advertisements.

04-04-2012, 06:50 PM	#45
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: Blazer Leveling Mats Mats came today, thanks a bunch. Posted via Mobile Device

04-04-2012, 09:11 PM	#48
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Blazer Leveling Mats pm sent regarding payment info, want to send payment asap. wont be online until tomorrow evening. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

04-04-2012, 09:43 PM	#49
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: Blazer Leveling Mats Payment received. Thank you. Posted via Mobile Device

04-11-2013, 04:06 AM	#50
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,957	Re: Blazer Leveling Mats If anyone has a set of these I'm interested. __________________ Kirk 72 Blazer CST 4wd highlander

Register or Log In To remove these advertisements.