|
04-16-2012, 11:08 PM
|
#1 |
|
Registered User
Join Date: Nov 2011
Location: Idaho
Posts: 857
|
What mil?
Getting ready to wire in my check engine light and was wondering what style bulb everyone is using where they are being placed and purchased. Please post picture and part# if possible thanks.
Posted via Mobile Device |
|
|
|
04-17-2012, 10:45 AM
|
#2 |
|
1965 Chevy C10, 2005 4.8L/4l60
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: What mil?
I used a small LED light and put it in my dash panel. it is below the Speedo next to the high beam light.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684  support our troops! |
|
|
|
|
04-17-2012, 01:14 PM
|
#3 |
|
Registered User
Join Date: Oct 2010
Location: El Mirage AZ
Posts: 169
|
Re: What mil?
I used a small 12v led also but for some reason it has a faint glow while the truck is running but when the check engine light comes on its much brighter, someone suggested putting a small resistor on it but i haven't tried it yet, ether way you can get them for like a buck at radio shack type places I sodered small leads on mine with some connectors so I can take them out if needed.
Posted via Mobile Device |
|
|
|
|
04-18-2012, 12:36 AM
|
#4 |
|
Registered User
Join Date: Nov 2011
Location: Idaho
Posts: 857
|
Re: What mil?
Thanksn guys can't believe we only have two swapper on this forum anyone else?
Posted via Mobile Device |
|
|
|
|
04-18-2012, 07:53 AM
|
#5 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: What mil?
In my '71 I put mine in the gas gauge where it used to say TEMP. I took apart a 87 dash and got the service engine part out of it and put it in my dash.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
04-18-2012, 09:26 AM
|
#6 |
|
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: What mil?
ls1nova71: show off!
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
|
|
|
|
04-18-2012, 09:39 AM
|
#7 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: What mil?
Who me???
 Well it just seemed like the thing to do...,..  Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
04-19-2012, 08:24 AM
|
#8 |
|
Registered User
Join Date: Dec 2007
Location: Odessa, Texas
Posts: 212
|
Re: What mil?
Mine was extremelly simple, I have a Dakota Digital dash which has an engine light built in, just connect the wire. This dash has more than paid for itself, everything just hooked up and only needed minor settings in the computer to work.
__________________
1950 Chevy 3100 Ramp Bed 1-ton http://67-72chevytrucks.com/vboard/s...d.php?t=749386 1965 Chevy Step Side 1971 Chevy Short Wide Bed http://67-72chevytrucks.com/vboard/s...d.php?t=277191 1971 Chevy C-30 1-ton 1971 Chevy Chevelle 1972 Chevrolet C-30 1 ton 2005 Dodge Ram 2500 5.9 Cummins 2017 Fleetwood Pace Arrow 35M motorhome 350 Cummins 2020 Jeep Wrangler Unlimited Rubicon |
|
|
|
|
04-19-2012, 09:51 AM
|
#9 |
|
Has more rust than truck...
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
|
Re: What mil?
I used a small 12v LED from here: http://www.allelectronics.com/
|
|
|
|
|
04-19-2012, 10:12 AM
|
#10 |
|
Registered User
Join Date: Jan 2012
Location: Virginia Beach, VA
Posts: 282
|
Re: What mil?
Mine isn't 100% yet, but like LS1nova, I have a factory-style CEL. I cut up a complete dash from a '89 Trans-Am GTA and modded it into a spare glovebox door to use as a gauge panel. I have custom but factory looking CEL, Seat belt, BRAKE, and turn signals/high beam lights now.
|
|
|
|
|
05-07-2012, 10:07 PM
|
#11 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: What mil?
Thought I'd throw up a few pics of mine. It's out of an '87 Chevy truck, I put it in the "temp" spot of my '71since it's not used anyway. The opening is just big enough for the 'service engine' part, so you can't see the 'soon', actually I took a sharpie and blacked it out because you could just see a hint of it (it's noticeable in the pic, it was taken before I blacked it out). Pics aren't the best, I was holding it up to a light so it would be lit up, but you get the idea.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
05-08-2012, 10:55 AM
|
#12 |
|
Registered User
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
|
Re: What mil?
cool.....you have way too much time man...
__________________
my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682 |
|
|
|
|
05-08-2012, 12:10 PM
|
#13 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: What mil?
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
 |
| Bookmarks |
|
|
\\ MY YOUTUBE CHANNEL
Linear Mode
