OR Parting out 72 Suburban C10 402 TH400

[cmcr0703]

if u still have the seats ,im interested but dont know how much it would be shipped to new york.....i also need the roof off that green suburban if theres no rot on it.get back to me and lets see if we can work somethin out...thanks

[tll74]

Originally Posted by cmcr0703

if u still have the seats ,im interested but dont know how much it would be shipped to new york.....i also need the roof off that green suburban if theres no rot on it.get back to me and lets see if we can work somethin out...thanks

I have sold the front seat locally. I do have the second 3 pass rear seat. 200.00 plus shipping. I have scrapped the shell and frame from the green one. I do still have the roof off the white one and just bought another 72 complete 402 truck tonight with a good roof. Shipping would be a killer. I can get a approximate quote if you like on both. The roof would be 350.00 plus the ride.
Thanks, Tom

[tll74]

sunk99..Add 7.50 extra for shipping. So, 49.00 + 25.00 + 7.50 = 81.50 Sound ok?
Thanks, Tom

[sunk99]

Found that the problem wit my latch is actually the door where the screws are so dont need the latch,message me your payment info for the straps and lense and I'll send payment
Sorry for the mistake.
Posted via Mobile Device

[capev86]

I have sold the front seat locally. I do have the second 3 pass rear seat. 200.00 plus shipping.

holy cow...you already parted out the white one? i was hoping to have a shot at the front seat upholstery and pick of the other 2 seats. guess i'll have to keep an eye for the next time you part a 72 custom deluxe burb with blue interior.

[tll74]

Originally Posted by capev86

holy cow...you already parted out the white one? i was hoping to have a shot at the front seat upholstery and pick of the other 2 seats. guess i'll have to keep an eye for the next time you part a 72 custom deluxe burb with blue interior.

I have NOT parted the white one yet. The seat I offered was the second row seat out of the green one. Atleast I thought that was the one he was refuring to. The white one will be getting the axe this weekend. Don't worry your still up for the seats.
Thanks, Tom

[cmcr0703]

thanks...ill have to try to find something local,,,i appreciate the response

[jessewebb]

Tom, I need 2 door latches, and the window channel for the drivers side. The channel that goes down in the door that the window runs in. and the screw that holds it just above the hinge. reverse light housing for the passenger side. The latches sit inside the door. Just so were clear, on what I need. LMK if you have these. Give me a price on all of it shipped to 25801. Thanks Pete

[motorhead79]

If you still have the complete set of lower tail gate hardware please pm me cause I'll take all of it. Please let me know also if you have the aft bed parchment trim. I'll take that as well.

[1970]

Do you sill have 402 starter heat shield?

[tll74]

Originally Posted by jessewebb

Tom, I need 2 door latches, and the window channel for the drivers side. The channel that goes down in the door that the window runs in. and the screw that holds it just above the hinge. reverse light housing for the passenger side. The latches sit inside the door. Just so were clear, on what I need. LMK if you have these. Give me a price on all of it shipped to 25801. Thanks Pete

Pete, I have it all. PM sent

[tll74]

Originally Posted by motorhead79

If you still have the complete set of lower tail gate hardware please pm me cause I'll take all of it. Please let me know also if you have the aft bed parchment trim. I'll take that as well.

Yes I have all what your looking for. A detailed list off my list would be best just to confirm.

Originally Posted by 1970

Do you sill have 402 starter heat shield?

YES

Thanks, Tom

[1970]

Tom can you post a picture of the starter heat shield.

Is it stainless? Thanks rich

[tll74]

Originally Posted by 1970

Tom can you post a picture of the starter heat shield.

Is it stainless? Thanks rich

Yes, it is stainless. There is a pic of it in post 11. It to the right of the door handles. I can get a close up if needed. Thanks, Tom

[tll74]

Originally Posted by motorhead79

If you still have the complete set of lower tail gate hardware please pm me cause I'll take all of it. Please let me know also if you have the aft bed parchment trim. I'll take that as well.

I have all the rear trim panels and the spare tire cover. On the tailgate hardware are looking for these:
"Lower gate support straps. 12.00 each 20.00 pair"
If so yes I do. I'll get a shipping cost on all of it. Thanks, Tom

[1970]

Tom i'll take the starter heat shield.

Thanks rich

[Pmarti69]

Do you still have the 71-72 gas pedal assy with TH400 switch and wiring to engine harness. If so can you post a picture of it. Thanks again, I was able to find TH400 locally. Thanks Paul

[Pmarti69]

Looking to see if you have the items in the pictures with the rollers on the regulators in good shape as well the lock mechanisms for both door. Priced shipped to 77345, Thanks Paul. I just saw you had what i need for the doors.

[restart42]

Originally Posted by tll74

more pics

post 12 shows headliner bows, do you have the
three bows with the clips ?
shipped to 10462 ?

Thanks,,,Pat

[tll74]

Originally Posted by Pmarti69

Do you still have the 71-72 gas pedal assy with TH400 switch and wiring to engine harness. If so can you post a picture of it. Thanks again, I was able to find TH400 locally. Thanks Paul

Paul, Yes I do, I'll get a close up Monday (it is at the shop). I still have the latches 35.00 LH-30.00 RH (I have multiple of these), striker plates 8.00 RF-12.50 RR. The rollers on the reg's are stuck you would need to lube and free them up otherwise a coat of paint and lube these would be good as new 20.00 ea or 37.50 pr.

Originally Posted by restart42

post 12 shows headliner bows, do you have the
three bows with the clips ?
shipped to 10462 ?

Thanks,,,Pat

Pat, I have the two in the pic and one more the K10 I just parted plus the 72 white C10 (on the trailer now). The end clips are there on all of them. 30.00 plus shipping on the three. I will have to find a tube that they will fit in and get the shipping cost. It will be tomorrow for that.

Thanks, Tom

[tll74]

Originally Posted by 1970

Tom i'll take the starter heat shield.

Thanks rich

Rich, Shipping 8.00, 402 starter heat shield. Solenoid mounting tab is split. 25.00

Thanks, Tom

[Pmarti69]

Originally Posted by Pmarti69

Looking to see if you have the items in the pictures with the rollers on the regulators in good shape as well the lock mechanisms for both door. Priced shipped to 77345, Thanks Paul. I just saw you had what i need for the doors.

Disregard on the window regulators, strike plate, found two doors in my area, thanks Paul

[Pmarti69]

Originally Posted by Pmarti69

Do you still have the 71-72 gas pedal assy with TH400 switch and wiring to engine harness. If so can you post a picture of it. Thanks again, I was able to find TH400 locally. Thanks Paul

Bump

[restart42]

Originally Posted by tll74

Pat, I have the two in the pic and one more the K10 I just parted plus the 72 white C10 (on the trailer now). The end clips are there on all of them. 30.00 plus shipping on the three. I will have to find a tube that they will fit in and get the shipping cost. It will be tomorrow for that.

Thanks, Tom

$30 looks good,, let me know when ready to ship, total $,
PM me addy for PayPal,,

Thanks,Pat

[notsolo]

Originally Posted by Pmarti69

Looking to see if you have the items in the pictures with the rollers on the regulators in good shape as well the lock mechanisms for both door. Priced shipped to 77345, Thanks Paul. I just saw you had what i need for the doors.

Hey Tom I could use rt side door hinges for 72 blazer and left window regulator. (Hoping its the same as what you have) inside door handles and winder handles both sides. Cost with shipping to 21863 .... Thanks... Ed