Woohoo! I got TPI... parts...

[closer9]

Got this from Dad last weekend. Appears to be off an 86 F-body, IIRC. Lower intake will fit the older style heads, and it's a MAF computer. I'm missing the MAF sensor though. Will look into a new EFI K5 tank, Camaro pump, and aftermarket harness. Thinking about powder coating the lower intake Chevy orange to match the block/heads, then black wrinkle on the upper (with the fins sanded), and probably chrome powder coat for the runners. Truck came with a set of chrome (or maybe stainless) Gibson shorty headers with a O2 sensor port.

But still gotta get my wheels finished, and front leaf replaced, and new bushings on the other side, and speedo adapter, and would like to lift the rear another 2" in there somewhere... Oh, and I've still got nerf bars to mount. If I only had more time, and money!

[bucannon]

lets see more pictures!

[closer9]

Alrighty, need to get it all out of the box, and see what else might be missing. Figure I'll replace all the sensors before installing, so not too concerned if they are missing.

[68Timber]

The tuned port setups still look great, nice score.

[Mr. 250r]

hands down best looking fuel injection besides the ram jet 502 setups or extremely custom ls stuff but otherwise good wish my dumb iroc would not over heat so i could use it for once