Return line question.

[danpomeroy]

Hello,

So, I am gathering parts for my build and I have a quick question.

I am planning on using the stock, behind the seat, tank for now with the external fuel pump. My question is where should I plumb the return line and what fitting do I use?

I plan on putting a tank under the bed later but I am spending enough getting the motor and trans.

I was thinking of drilling a hole in the sending unit and putting a fitting in there. Does that sound right?

Any ideas are welcome.

Thank you
Danny
Posted via Mobile Device

[ls1nova71]

Originally Posted by danpomeroy

Hello,

So, I am gathering parts for my build and I have a quick question.

I am planning on using the stock, behind the seat, tank for now with the external fuel pump. My question is where should I plumb the return line and what fitting do I use?

I plan on putting a tank under the bed later but I am spending enough getting the motor and trans.

I was thinking of drilling a hole in the sending unit and putting a fitting in there. Does that sound right?

Any ideas are welcome.

Thank you
Danny
Posted via Mobile Device

That's pretty much what I did, works fine. Post #93 http://ls1tech.com/forums/conversion...0-4l80e-5.html