Tricked-out Chevy six cylinder engines - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1963c-10 · 05-09-2012, 02:57 PM

You mean something like this?

RAYDAY · 05-09-2012, 03:02 PM

Ya you got any pics of the throttle linkage?

RAYDAY · 05-09-2012, 03:16 PM

Quote:

Originally Posted by Swerve-Driver

Not sure if anyone posted this guys (Leo Santucci's) 292 setup. http://www.cdpautomachine.com/leo/leo.html

While it is in a Stude, it is still a pretty awesome engine.

The work he did on the head alone is pretty impressive and definitely not an off-the-shelf-deal.

I have been a fan of 292's ever since I had to change the lifters in my pop's 70 3/4ton- gads, probably 25 years ago now

Also, Greg64, as a fan of TBI's I can appreciate your setup- I bet it gives pretty reliable performance.
Dual TBI's is do-able, but would likely require some ecu changes- probably additional drivers for the injectors. thirdgen.org and/or http://www.dynamicefi.com/.
S-D

there was a few set ups using the 2 sbc head deal when the local dirt track had a 6 mod class. that was when i was into boosted buicks and dint pay much attn! im going to have to ask around!!!

1963c-10 · 05-09-2012, 03:51 PM

Rayday...let me see what pics I have left. This is the best I can do.

RAYDAY · 05-09-2012, 07:49 PM

Good thanks!

K5 Addiction · 05-09-2012, 11:07 PM

Love all these bad A$$ inline 6's! In a few months I'm gonna have a new tricked out 6 to add to this thread. Tom Lowe (inliners.org) is building me a new long block with a custom grind roller cam, lump port heads with roller rockers a clifford 4 barrel intake & I'm putting a F.A.S.T. Fuel injection setup on top of that. projected output of 300+ horse & 320 Ft. lbs of torque. I can't wait!

Fastest32 · 05-10-2012, 12:39 AM

Awesome thread!!
Posted via Mobile Device

hungarian1964 · 06-10-2012, 10:09 AM

Hey, was wondering if you guys could help me. My 68 has a 250 in it and I backed it with a TH350 and used a Flexplate that came off a 327(14"???) The problem I am having, is the Starter will not bolt up to the Block, the holes line up but the starter shaft hits the Flexplate. My question is, do I need to find a different starter? or do I need a smaller Flexplate? Any help would be great, thanks guys.

63sbssbbw · 06-10-2012, 10:38 AM

Have you tried shims to move it outward??
t

hungarian1964 · 06-10-2012, 11:01 AM

Didnt think of that, the problem is I would need to many shims, it needs to go in a least 1/2" more till I can bolt it up.

1Bad62Pro/Street · 06-23-2012, 01:30 AM

8.44 @ 160 mph!

Mighty 6:
http://www.mighty6.com/

MIGHTY6 NEW PERSONAL BEST ET & MPH ON DOT...

Posted via Mobile Device

hungarian1964 · 06-23-2012, 09:50 AM

You have to be sh-ting me!!!! That was AWESOME!

63_C10 · 07-26-2012, 08:04 PM

292 with 194 head. Want to run 2x1 bbl on offy intake but can't figure out how to run it with my stock throttle linkage. Engine is backed by an 833 overdrive transmission. Engine sat in a shop or about 20 years. Wasn't stuck and pretty much brand new on the inside....paint marks on valve springs, rod caps, cam...ect. Could still see the cross hatch marks on the cylinder walls. One piston was damaged by a screw. Replaced piston and there ya have it. Hope to finally hear her run this weekend! Wish me luck!

awbrown · 07-26-2012, 09:31 PM

I love it !!!

1Bad62Pro/Street · 09-05-2012, 10:04 AM

Normac Special / Wayne-Chevrolet 3870cc inline...

Normac Special Wayne-Chevrolet 3870cc Inline 6cyl...

Kirby Race Truck - YouTube

Kirby 2009-Sturgis - YouTube

Sturgis Drags 6-27-09 - YouTube

Kirby 2009-Sturgis - YouTube

MIGHTY6 NEW PERSONAL BEST ET & MPH ON DOT...

MIGHTY6 857hp Dyno pull New Garrett GTX4508R ...

JMR5 · 09-21-2012, 12:14 AM

This one is incredible.....

http://youtu.be/hTI8K_Xiv2c

1Bad62Pro/Street · 09-21-2012, 08:22 AM

Quote:

Originally Posted by JMR5

This one is incredible.....

http://youtu.be/hTI8K_Xiv2c

I agree 100%

boucher racing · 09-21-2012, 01:31 PM

Quote:

Originally Posted by JMR5

This one is incredible.....

http://youtu.be/hTI8K_Xiv2c

Need more pics and info!

Man-o-man, that thing pops!

**62 Longbed** · 09-21-2012, 02:49 PM

1962 Chevy engine: 261 cu in Chevy 6 cyl engine bored to 272 cu in, Clifford cam, Offenhouser valve cover & side plate, Vertex mag, 3 Carter side draft carbs w/polished split alum manifold, Fenton headers.

1Bad62Pro/Street · 09-21-2012, 03:00 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Normac Special / Wayne-Chevrolet 3870cc inline 6cyl pt 2 - YouTube
Normac Special Wayne-Chevrolet 3870cc Inline 6cyl pt 1 - YouTube
Kirby Race Truck - YouTube
Kirby 2009-Sturgis - YouTube
Sturgis Drags 6-27-09 - YouTube
Kirby 2009-Sturgis - YouTube
MIGHTY6 NEW PERSONAL BEST ET & MPH ON DOT TIRES - YouTube
MIGHTY6 857hp Dyno pull New Garrett GTX4508R - YouTube

http://www.mighty6.com/motorvation
For those who have asked about the Mighty6 engine....

Quote:

“Motorvation” for our pickup is currently provided by an direct port nitrous oxide injected, dual four barrel 1968 Chevrolet 292 Straight-six cylinder engine that has been overbored .060″ for an actual displacement of 301 Cubic Inches.

Complete driveline and chassis specifications are as follows

Short Block :

Balanced stock crankshaft
Superod connecting rods
Aries pistons
Fisher harmonic balancer
Crower camshaft
Custom sheet metal oil pan with windage screen and pickup tube
Aerospace remote mount water pump

Cylinder Head and Valvetrain :

Sissell Automotive Aluminum Head
1.94″ Intake, 1.60″ exhaust severe duty valves
Harland and Sharp 1.72 ratio roller rocker arms
Custom stud girdle
Sissell’s Automotive sheetmetal valve cover
3/8″Crower push rods (Two piece design with mini-lifter)

Intake and Exhaust System :

Custom Sheetmetal Intake Manifold
Electronic Fuel Injection
NOS Adjustable Direct Port Nitrous Oxide Injection System
K & S Machine custom step headers with 1 3/4″x10″ primary tubes stepped to 1 7/8″x25″ with 3″ Hooker collectors
3″ Flowmaster two-chamber mufflers

Ignition system :

MSD 6AL with blaster 2 coil
MSD Timing Computer
Mallory UniLite distributor (locked advance)

Transmission :

Powerglide Transmission with manual valve body
TCI 8″ torque converter, approximately 5000 RPM stall
Hurst Quarter Stick shifter
Hipster transbrake

Rear End :

9″ Ford unit with 4.11 Richmond Gears
28 spline spool with Mosier Axles

Chassis :

Custom front straight axle
Wilwood front disk brakes lightweight package
Wilwood master cylinder mounted under door
Stock rear leaf springs with traction bars
Tilton super starter
RCI 8-gallon fuel cell
Optima dry cell battery

Wheels and Tires :

Front: 15×5 Weld Wheels shod with P195 60 R15 Firestone Firehawks
Rear: 15×10 weld Wheels with 26×10 Mickey Thompson ET Drags

Interior :

AMC Jeep seats with chrome moly brackets
Hurst Quarter Stick shifter
1 5/8″ Chrome moly roll bar
RCI 5-way safety harness

Heater63 · 09-23-2012, 12:32 AM

Mighty6. Awesome. Period.

1Bad62Pro/Street · 09-26-2012, 09:17 AM

Vintage Hot Rod Straight 6 [S3 Ep.11-1] - YouTube

jcramsey · 11-21-2012, 10:41 AM

Just picked up a 250 for my '66. Stock aside from the Offy intake and headers...

Few odds and ends left to button up. Hope to have it going soon.

ChrisDollins · 12-16-2012, 08:37 PM

Found this pic earlier today and have been drooling over it ever since. Can't find any information on it either.

Chris

Uploaded with ImageShack.us

**slepysal** · 12-18-2012, 09:03 PM

Quote:

Originally Posted by 1963c-10

230 that was built for a 66 nova. Engine now for sale as is car. guess the owner went for a differnt project

Were did you get those headers

05-09-2012, 02:57 PM	#151
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Tricked-out Chevy six cylinder engines You mean something like this? Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-09-2012, 03:02 PM	#152
RAYDAY Registered User Join Date: Feb 2012 Location: Carnegie PA Posts: 130	Re: Tricked-out Chevy six cylinder engines Ya you got any pics of the throttle linkage? __________________ 96 s10 static drop smooth and blue 99 silverado nothing stock layed out on 24s 65 c10 bagged patina driver http://www.myrideisme.com/Garage/az480 half-assed build thread http://67-72chevytrucks.com/vboard/s...=1#post5206828

05-09-2012, 03:51 PM	#154
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Tricked-out Chevy six cylinder engines Rayday...let me see what pics I have left. This is the best I can do. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-09-2012, 07:49 PM	#155
RAYDAY Registered User Join Date: Feb 2012 Location: Carnegie PA Posts: 130	Re: Tricked-out Chevy six cylinder engines Good thanks! __________________ 96 s10 static drop smooth and blue 99 silverado nothing stock layed out on 24s 65 c10 bagged patina driver http://www.myrideisme.com/Garage/az480 half-assed build thread http://67-72chevytrucks.com/vboard/s...=1#post5206828

05-09-2012, 11:07 PM	#156
K5 Addiction Registered User Join Date: Jul 2011 Location: Tennessee Posts: 404	Re: Tricked-out Chevy six cylinder engines Love all these bad A$$ inline 6's! In a few months I'm gonna have a new tricked out 6 to add to this thread. Tom Lowe (inliners.org) is building me a new long block with a custom grind roller cam, lump port heads with roller rockers a clifford 4 barrel intake & I'm putting a F.A.S.T. Fuel injection setup on top of that. projected output of 300+ horse & 320 Ft. lbs of torque. I can't wait!

05-10-2012, 12:39 AM	#157
Fastest32 Registered User Join Date: Nov 2009 Location: Austin Texas Posts: 370	Re: Tricked-out Chevy six cylinder engines Awesome thread!! Posted via Mobile Device __________________ BaBaBooey BaBaBooey GO SPURS GO!!!

06-10-2012, 10:09 AM	#158
hungarian1964 Registered User Join Date: Feb 2012 Location: Lacrescenta, CA Posts: 61	Re: Tricked-out Chevy six cylinder engines Hey, was wondering if you guys could help me. My 68 has a 250 in it and I backed it with a TH350 and used a Flexplate that came off a 327(14"???) The problem I am having, is the Starter will not bolt up to the Block, the holes line up but the starter shaft hits the Flexplate. My question is, do I need to find a different starter? or do I need a smaller Flexplate? Any help would be great, thanks guys.

06-10-2012, 10:38 AM	#159
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: Tricked-out Chevy six cylinder engines Have you tried shims to move it outward?? t __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

06-10-2012, 11:01 AM	#160
hungarian1964 Registered User Join Date: Feb 2012 Location: Lacrescenta, CA Posts: 61	Re: Tricked-out Chevy six cylinder engines Didnt think of that, the problem is I would need to many shims, it needs to go in a least 1/2" more till I can bolt it up.

06-23-2012, 09:50 AM	#162
hungarian1964 Registered User Join Date: Feb 2012 Location: Lacrescenta, CA Posts: 61	Re: Tricked-out Chevy six cylinder engines You have to be sh-ting me!!!! That was AWESOME!

07-26-2012, 08:04 PM	#163
63_C10 Registered User Join Date: Nov 2007 Location: Cartersville, GA Posts: 68	Re: Tricked-out Chevy six cylinder engines 292 with 194 head. Want to run 2x1 bbl on offy intake but can't figure out how to run it with my stock throttle linkage. Engine is backed by an 833 overdrive transmission. Engine sat in a shop or about 20 years. Wasn't stuck and pretty much brand new on the inside....paint marks on valve springs, rod caps, cam...ect. Could still see the cross hatch marks on the cylinder walls. One piston was damaged by a screw. Replaced piston and there ya have it. Hope to finally hear her run this weekend! Wish me luck!

07-26-2012, 09:31 PM	#164
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: Tricked-out Chevy six cylinder engines I love it !!!

09-21-2012, 12:14 AM	#166
JMR5 Registered User Join Date: Sep 2008 Location: Rocklin, CA Posts: 64	Re: Tricked-out Chevy six cylinder engines This one is incredible..... http://youtu.be/hTI8K_Xiv2c Attached Images

09-21-2012, 02:49 PM	#169
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: Tricked-out Chevy six cylinder engines 1962 Chevy engine: 261 cu in Chevy 6 cyl engine bored to 272 cu in, Clifford cam, Offenhouser valve cover & side plate, Vertex mag, 3 Carter side draft carbs w/polished split alum manifold, Fenton headers. Attached Images

09-23-2012, 12:32 AM	#171
Heater63 Registered User Join Date: Dec 2007 Location: N Texas Posts: 580	Re: Tricked-out Chevy six cylinder engines Mighty6. Awesome. Period. __________________ 292 + TKO500



Register or Log In To remove these advertisements.

11-21-2012, 10:41 AM	#173
jcramsey Registered User Join Date: Jun 2011 Location: Marion, NC Posts: 851	Re: Tricked-out Chevy six cylinder engines Just picked up a 250 for my '66. Stock aside from the Offy intake and headers... Few odds and ends left to button up. Hope to have it going soon. Attached Images

12-16-2012, 08:37 PM	#174
ChrisDollins Registered User Join Date: Apr 2011 Location: Pocahontas, AR Posts: 554	Re: Tricked-out Chevy six cylinder engines Found this pic earlier today and have been drooling over it ever since. Can't find any information on it either. Chris Uploaded with ImageShack.us __________________ 1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182

Register or Log In To remove these advertisements.