Rear end questins - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dtkarst** · 07-08-2012, 08:46 PM

I had a question on a rear end for a 63 c10. We pulled it all apart and the ring and pinion are shot, blew out in 68 according to the date codes but there are 41 to 11 on the teeth. My question is where is the best place to find a new rear end kit? or where have people gotten it before? And also if anyone knows that that gear ratio would be thatd be helpful. Any info will help thanks

CRGRS 66 · 07-08-2012, 11:10 PM

Quote:

Originally Posted by dtkarst

I had a question on a rear end for a 63 c10. We pulled it all apart and the ring and pinion are shot, blew out in 68 according to the date codes but there are 41 to 11 on the teeth. My question is where is the best place to find a new rear end kit? or where have people gotten it before? And also if anyone knows that that gear ratio would be thatd be helpful. Any info will help thanks

I have seen ring and pinion gear sets at LMC, Classic, as well as the likes of Advance Auto Parts to name a few.

CRGRS 66 · 07-08-2012, 11:18 PM

captain fab had some links for a similar question link:

http://67-72chevytrucks.com/vboard/s...d.php?t=481683

amccomb · 07-09-2012, 01:11 AM

http://www.csgnetwork.com/rnggrpinioncalc.html

3.73 I bought mine from LMC. It might be smart to also buy the inner/outer pinion bearing raice's and seal. It all depends when you get it apart how bad they look.

**Clyde65** · 07-09-2012, 09:47 AM

summit racing, best pricing

**dtkarst** · 07-09-2012, 09:39 PM

Well the plan is to get a master kit if possible. bearing seals gears everything

07-08-2012, 08:46 PM	#1
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Rear end questins I had a question on a rear end for a 63 c10. We pulled it all apart and the ring and pinion are shot, blew out in 68 according to the date codes but there are 41 to 11 on the teeth. My question is where is the best place to find a new rear end kit? or where have people gotten it before? And also if anyone knows that that gear ratio would be thatd be helpful. Any info will help thanks

07-08-2012, 11:18 PM	#3
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: Rear end questins captain fab had some links for a similar question link: http://67-72chevytrucks.com/vboard/s...d.php?t=481683 __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

07-09-2012, 01:11 AM	#4
amccomb Registered User Join Date: Jun 2011 Location: mass Posts: 150	Re: Rear end questins http://www.csgnetwork.com/rnggrpinioncalc.html 3.73 I bought mine from LMC. It might be smart to also buy the inner/outer pinion bearing raice's and seal. It all depends when you get it apart how bad they look.

07-09-2012, 09:47 AM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Rear end questins summit racing, best pricing __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-09-2012, 09:39 PM	#6
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: Rear end questins Well the plan is to get a master kit if possible. bearing seals gears everything



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.