|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-06-2012, 09:31 PM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: Oklahoma City, Ok
Posts: 438
|
EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Alright my friends it has come time for me to sell off all my parts and pieces I have been collecting for the last two years. I was planning on building a truck and a blazer but somehow life has a different plan for us sometimes. Therefore, everything must go. I have found a great deal of help in this website and have appreciated all of the tips about what to do and what not to do when building these truckks back. You guys have helped me over the last couple of years learn about these trucks and I thank you. Now I just hope that my collection can go out to you guys to help you along with your project.
The list below is about as good as inventory as I can come up with. I am sure I am missing a few things so if you are needing something please let me know. I am guessing at a lot of these prices so if you see something that you think is too high or too low please let me know that as well!!!! I have many Suburban and Blazer Parts as well. Check out the thread in that forum with the ALL MUST GO title. Here we go Longbed w/ Factory Tool Box on Passenger Side, Have Door for it ?? Transmission Crossmembers - qty 3 Rolling Long Bed 1/2 Ton Frame, 5 Lug Disc Brake Power Steering $350 69 Model Non A/C Cab, Needs Driver Rocker & Corner, No Title $200 ?? Model A/C Cab, Needs Rocker & Corners, No Title $300 6 Lug 12 Bolt Rear End for 1/2 Ton Truck $150 Out of 69 Model Non Tilt Auto Columns - qty 3 $25 ea Bench Seat Frames - qty 3 $25ea Complete Non A/C Dashes, Not Cut Up - qty 2 $100ea Complete A/C Dash, Not Cut Up $150 Step Side Rail Supports, Complete Set $75 Blazer/Suburban Gas Tank - $75ea Step Side Drivers Bed Side $125 Step Side Front Panels - qty 2 $75ea Step Side CHEVROLET stamped Tail Gates 4X4 Transmission Tunnel Cover $75 Step Side Short Drivers Side Step $35 Pair of Step Side Long Steps $75 Wide Bed Wheel Housings $25ea 69-72 Hoods - qty 3 $100 to $150 Step Side Drivers Fenders w/ spare cut out - qty 2 $100ea 67-68 Grill Shell $200 72 Grill Assembly w/ Bow Tie $200 69-72 Driver Fender Rust Free - qty 2 $75ea Drivers Inner Fender $40 Radiator/Core Support Battery Tray Rusted but nothing else $75 67-72 Rear Chrome Bumper $50 Aftermarket 67-70 Chrome Front Bumper $75 Original but needs some edge straightening Turbo 350 2wd Trans $75 350 4 Bolt Main Block only with Caps $100 Complete 454 Big Block w/ accessories $650 I have many interior pieces, brackets and just other stuff that I havent even gone through yet. So please ask!! I would be happy to ship any items that are shippable as long as the frieght is paid for. I have a PayPal account for such transactions. For Pick Up, I am located just outside of Oklahoma City. Feel free to contact me with any questions or comments at redline5.0junkie@gmail.com I have posted a few photos of the items above on photobucket. Follow the link and enter the password ( allmustgo ) . http://s1057.photobucket.com/albums/...%2072%20TRUCK/ If you would like more detailed photos or information please let me know. Thanks for looking and I hope someone out there can put all of this stuff to good use. Kenny Last edited by MoreLoveThanMoney; 09-29-2012 at 11:28 AM. Reason: Updated Sold Items |
|
|
|
08-06-2012, 09:47 PM
|
#2 |
|
Just a Member
Join Date: Aug 2011
Location: Vevay, IN 47043 remimartin257@aol.com
Posts: 4,603
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
info on 700r4 and condition?
__________________
72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog |
|
|
|
|
08-06-2012, 09:49 PM
|
#3 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Your photo link on both your threads requires a password.
Edit: I am in idiot. I see now that you have provided the password.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. Last edited by 71swb4x4; 08-06-2012 at 09:58 PM. |
|
|
|
|
08-06-2012, 09:50 PM
|
#4 |
|
Registered User
 Join Date: Nov 2008
Location: bristol,CT
Posts: 580
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Have any pics of the doors Interested
|
|
|
|
|
08-06-2012, 09:51 PM
|
#5 |
|
Registered User
Join Date: Nov 2011
Location: Hanford, Ca
Posts: 86
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
I need a rear license plate mount and light from one of the bumpers if your willing to sell. 93230
|
|
|
|
|
08-06-2012, 09:58 PM
|
#6 |
|
Carpe manana
  
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,447
|
Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
Do you have an NP205 skid plate with crossmember?
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308  Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
|
|
|
|
|
08-06-2012, 10:01 PM
|
#7 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,395
|
Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
Kenny, our photo album says I have to have a password too look at it. Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
08-06-2012, 10:03 PM
|
#8 |
|
Registered User
Join Date: Jan 2012
Location: McAllen, Texas
Posts: 396
|
Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
Inline on the Blazer doors pending pics.
Posted via Mobile Device Last edited by 72Blazing; 08-06-2012 at 10:11 PM. |
|
|
|
|
08-06-2012, 10:04 PM
|
#9 |
|
Large Member
Join Date: Jun 2002
Location: Northwest Arkansas
Posts: 747
|
Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
interested in more details on:
72 Jimmy Rolling Body Converted to 2wd, This is great for rebuild. Please ask details about this rig, Have Title sending PM |
|
|
|
|
08-06-2012, 10:06 PM
|
#10 |
|
Registered User
Join Date: Jul 2011
Location: strausstown pa
Posts: 3,394
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
I will take the best set of shortbed step side steps pending on a reply of the condition ie any rust holes under the fenders or dents anywhere and also shipping please to 19559 thanks
__________________
81 camaro 355 4/spd 342 posi my first love  .67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover. |
|
|
|
|
08-06-2012, 10:19 PM
|
#11 |
|
Registered User
Join Date: Nov 2011
Location: Edmond, OK.
Posts: 1,362
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Very interested in the front and rear bumpers. Are they new? Do you have pics?
I guess I should say I will take both front and rear bumpers pending pic's and condition.
__________________
Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build Last edited by Crash_OK; 08-06-2012 at 10:28 PM. |
|
|
|
|
08-06-2012, 10:43 PM
|
#12 |
|
Registered User
Join Date: Jan 2012
Location: McAllen, Texas
Posts: 396
|
Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
I dont see any pics of the Blazer doors on photobucket. Can I get some pics to chrisb614@aol.com
Thanks, Chris Posted via Mobile Device |
|
|
|
|
08-06-2012, 10:44 PM
|
#13 | |
|
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,787
|
Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
Quote:
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
|
|
|
|
|
08-06-2012, 11:06 PM
|
#14 |
|
Registered User
Join Date: Jun 2012
Location: Hill Country
Posts: 435
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
I would be interested in the grille!! got any pics?
shipping to 92065? thanks |
|
|
|
|
08-06-2012, 11:13 PM
|
#15 |
|
Registered User
Join Date: Feb 2012
Location: Albuquerque NM
Posts: 3,053
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
looking for a posi rearend 5 lug or a posi carrier.
__________________
SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE) |
|
|
|
|
08-06-2012, 11:21 PM
|
#16 |
|
Registered User
Join Date: Aug 2009
Location: NewLexington,Ohio
Posts: 9
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Interested in sm465/205 shiping to 43764
|
|
|
|
|
08-06-2012, 11:24 PM
|
#17 |
|
Registered User
Join Date: Dec 2004
Location: Aztec, NM
Posts: 388
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
2nd on the front and rear bumpers pending pics and condition, and if the rear is for a stepside. Sure wish I could find a "patina'd" white one for the rear....
__________________
Super Blue - 1968 C-10 Short Stepside
Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac |
|
|
|
|
08-07-2012, 12:06 AM
|
#18 |
|
Registered User
Join Date: Jun 2012
Location: Hill Country
Posts: 435
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
just realized you have two grilles, I'm interested in the 69.
|
|
|
|
|
08-07-2012, 12:09 AM
|
#19 |
|
Registered User
Join Date: Nov 2010
Location: Oklahoma City, Ok
Posts: 438
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Not real sure how to reply to all the responses. I'm actually overwhelmed there's so much interest. Thank you guys!!!
The step side steps are excellent, have patina, but excellent. The bumpers are not new. As best I can tell factory original. I can email pics. They just need a good polishing. The 700r4 I'm not real sure about. I got it from a guy that wrecked his truck and pulled the drivetrain before scrapping the truck. I was going to have it rebuilt. I did forget to put on the list an entire step side wood floor bed. No wood or center supports but all 4 sides and fenders are there. It's the blue bed in the pictures. Posted via Mobile Device |
|
|
|
|
08-07-2012, 12:13 AM
|
#20 |
|
Registered User
Join Date: Nov 2010
Location: Oklahoma City, Ok
Posts: 438
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
69 grill is original and it's nice. Has a couple of small dings that are very fixable. Where do I need to send pics too?
Sorry, I do not have an extra 5 lug rear. The only one I have is under the rolling frame. I will just have to check freight on the trans and transfer case. They are heavy!!! I can send a pic if you like. I'm not sure of working order but the shifters move smoothly. They came out of a farm truck that never left the farm. Posted via Mobile Device |
|
|
|
|
08-07-2012, 12:16 AM
|
#21 |
|
Registered User
Join Date: Nov 2010
Location: Oklahoma City, Ok
Posts: 438
|
Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
I will get pics of the blazer doors
Posted via Mobile Device |
|
|
|
|
08-07-2012, 01:15 AM
|
#22 |
|
Registered User
Join Date: May 2012
Location: Dallas, TX
Posts: 57
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
I'm in line on the bumpers- Like to look at them soon. Not jumping the gun over anyone but they don't come through- count me in. I'll be in OKC tomorrow evening.
Last edited by rusty67; 08-07-2012 at 01:15 AM. Reason: misspelling |
|
|
|
|
08-07-2012, 05:46 AM
|
#23 |
|
Registered User
Join Date: Jun 2011
Location: Elk city ok
Posts: 891
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
In the list there is an item that says drop for $250. What is that? Interested. Thanks, Dustin
Posted via Mobile Device |
|
|
|
|
08-07-2012, 06:13 AM
|
#24 | |
|
Registered User
Join Date: Nov 2011
Location: Edmond, OK.
Posts: 1,362
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Quote:
I live in Edmond, could I come by and look at the bumpers?
__________________
Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build |
|
|
|
|
|
08-07-2012, 07:23 AM
|
#25 | |
|
Registered User
Join Date: Jun 2011
Location: Elk city ok
Posts: 891
|
Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
Quote:
Posted via Mobile Device |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
