TX parting out 72 gmc truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gmc 2500 4x4** · 10-07-2012, 06:04 PM

i 'll take front fender eyebrows if they are good

ajlezama · 10-07-2012, 06:15 PM

Quote:

Originally Posted by orange 69

$75.00 plus shipping?

Yeah i can do that.
Posted via Mobile Device

ajlezama · 10-07-2012, 06:18 PM

Quote:

Originally Posted by Steve Cole

How much for the gas pedal assembly?
Posted via Mobile Device

How about $35 plus shipping?
Posted via Mobile Device

ajlezama · 10-07-2012, 06:20 PM

[QUOTE=jimer1964;5633961]hey interested in gate but? anyway you could wash it? pics of the dent? shipping to pa 19320 thanks[/QUOTE

I will spray it down this week. I got two other guys local interested as well
So i will clean it up a bit.
Posted via Mobile Device

ajlezama · 10-07-2012, 06:38 PM

Quote:

Originally Posted by gmc 2500 4x4

i 'll take front fender eyebrows if they are good

Only one is good. Let me know if still interested.
Posted via Mobile Device

Dale99 · 10-08-2012, 11:13 AM

How bad is the rust in the pass front fender? Any other damage to it?

kaynnon · 10-08-2012, 01:20 PM

how much for the ac/heater control boxes under the dash and the control switches.

bollybib · 10-08-2012, 02:57 PM

I'm interested in the gas pedal assembly + cable if the first guy passes.

1967wannabe · 10-08-2012, 03:50 PM

interested in the bed floor if it's a shorty, can't tell in the pics.

**gmc 2500 4x4** · 10-08-2012, 04:23 PM

Quote:

Originally Posted by ajlezama

Only one is good. Let me know if still interested.
Posted via Mobile Device

price shipped to 14063 please

NSK · 10-08-2012, 04:28 PM

How much for the windsheild and sun visors? I can pick them up

ajlezama · 10-08-2012, 05:05 PM

Quote:

Originally Posted by NSK

How much for the windsheild and sun visors? I can pick them up

The windshield has crack. How about $50 for visors
They are in good shape
Posted via Mobile Device

ajlezama · 10-08-2012, 06:19 PM

Quote:

Originally Posted by 1967wannabe

interested in the bed floor if it's a shorty, can't tell in the pics.

its a longwheel base truck.. i know someone that has a floor but they want $400, has no rust or dents.. let me know if you are interested.. thanks

ajlezama · 10-08-2012, 06:20 PM

Quote:

Originally Posted by bollybib

I'm interested in the gas pedal assembly + cable if the first guy passes.

i dont think he is interested, have had no reply from him.. how about $50 buck for both.. let me know

ajlezama · 10-08-2012, 06:21 PM

Quote:

Originally Posted by kaynnon

how much for the ac/heater control boxes under the dash and the control switches.

how about $35 for the control and the heater boxes under dash you can have free if you pay shipping.. thanks

kaynnon · 10-08-2012, 07:17 PM

PM sent

OldYeller72 · 10-08-2012, 09:57 PM

Are you going to part out any of the front suspension? Example lower control arms?

orange 69 · 10-08-2012, 10:01 PM

Quote:

Originally Posted by ajlezama

Yeah i can do that.
Posted via Mobile Device

Sounds good! Is paypal ok? If so PM me for payment info please

**thelonerife** · 10-08-2012, 10:02 PM

the marker light on the pass. side fender. (the orange one)

Vintage Windmills · 10-08-2012, 10:17 PM

What is that tilt column from? Looks too long right behind the wheel to be correct. Curious how it works and what you want for it if Trevor passes

ajlezama · 10-08-2012, 10:24 PM

Quote:

Originally Posted by thelonerife

the marker light on the pass. side fender. (the orange one)

$20 shipped or is that to high.
Posted via Mobile Device

**thelonerife** · 10-08-2012, 10:26 PM

yes for me it is. I can do 10.00 shipped.

ajlezama · 10-08-2012, 10:28 PM

Quote:

Originally Posted by Vintage Windmills

What is that tilt column from? Looks too long right behind the wheel to be correct. Curious how it works and what you want for it if Trevor passes

The tilt experts say its from a van. But to be completely honest i dont really know. But i would take $180 plus shipping. Since members on here are asking $150 for a regular column.
Posted via Mobile Device

ajlezama · 10-08-2012, 10:30 PM

Quote:

Originally Posted by thelonerife

yes for me it is. I can do 10.00 shipped.

How about $15.
Posted via Mobile Device

**thelonerife** · 10-08-2012, 10:30 PM

I'll pass. Thx.

10-07-2012, 06:04 PM	#26
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,975	Re: parting out 72 gmc truck i 'll take front fender eyebrows if they are good

10-07-2012, 06:20 PM	#29
ajlezama Registered User Join Date: Oct 2009 Location: Houston Tx Posts: 616	Re: parting out 72 gmc truck [QUOTE=jimer1964;5633961]hey interested in gate but? anyway you could wash it? pics of the dent? shipping to pa 19320 thanks[/QUOTE I will spray it down this week. I got two other guys local interested as well So i will clean it up a bit. Posted via Mobile Device

10-08-2012, 11:13 AM	#31
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: parting out 72 gmc truck How bad is the rust in the pass front fender? Any other damage to it? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

10-08-2012, 01:20 PM	#32
kaynnon Registered User Join Date: Sep 2012 Location: Huntsville, Al Posts: 72	Re: parting out 72 gmc truck how much for the ac/heater control boxes under the dash and the control switches.

10-08-2012, 02:57 PM	#33
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: parting out 72 gmc truck I'm interested in the gas pedal assembly + cable if the first guy passes. __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911

10-08-2012, 03:50 PM	#34
1967wannabe Registered User Join Date: Aug 2011 Location: Houston TX Posts: 227	Re: parting out 72 gmc truck interested in the bed floor if it's a shorty, can't tell in the pics.

10-08-2012, 04:28 PM	#36
NSK Registered User Join Date: Oct 2011 Location: Hardin Tx Posts: 50	Re: parting out 72 gmc truck How much for the windsheild and sun visors? I can pick them up

10-08-2012, 07:17 PM	#41
kaynnon Registered User Join Date: Sep 2012 Location: Huntsville, Al Posts: 72	Re: parting out 72 gmc truck PM sent

10-08-2012, 09:57 PM	#42
OldYeller72 Registered User Join Date: May 2012 Location: Whitewright, TX Posts: 27	Re: parting out 72 gmc truck Are you going to part out any of the front suspension? Example lower control arms?

10-08-2012, 10:02 PM	#44
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: parting out 72 gmc truck the marker light on the pass. side fender. (the orange one) __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-08-2012, 10:17 PM	#45
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: parting out 72 gmc truck What is that tilt column from? Looks too long right behind the wheel to be correct. Curious how it works and what you want for it if Trevor passes __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

10-08-2012, 10:26 PM	#47
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: parting out 72 gmc truck yes for me it is. I can do 10.00 shipped. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-08-2012, 10:30 PM	#50
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: parting out 72 gmc truck I'll pass. Thx. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.