Need help with P/s and air conditioning mounting.

[cam-camaro]

Took pictures of it before I did rebuild, dropped phone in water and my memory isn't so great. I can't find anyone near me with the same hook-up as mine to look at ( kind of a shame considering how popular these trucks are).

It's a 1985 chevy 305. Does anyone have any pictures of their own truck showing the bolting up of the power stern and air conditioner? I remember when i took them off they were interconnected in some way( I think). a diagram would work too if it's applicable to my motor. Any help is greatly appreciated!

[Desert1957]

Which brackets do you need pics of? Here is my 83 setup


Desert

[cam-camaro]

Thanks for the pictures man. They really help. If you could also take some from all sides of the air conditioner bracket I would be eternally grateful. When I took mine off it was attached to the exhaust manifolds, intake, and power stern ( I think)

[Desert1957]

Originally Posted by cam-camaro

Thanks for the pictures man. They really help. If you could also take some from all sides of the air conditioner bracket I would be eternally grateful. When I took mine off it was attached to the exhaust manifolds, intake, and power stern ( I think)

Desert

[dale3goodwrench]

Here is a shot of the brackets of how they are mounted to the front of the block. On the stud there is a little spacer that goes there before the power steering bracket goes on.

[cam-camaro]

Thank you guys so much. I got the brackets all on today, and I noticed my power stern was a little cock-eyed. I figured I was missing a spacer, and you just confirmed it. Thanks guys!