Brake Booster Options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JNJchev77 · 01-02-2013, 01:02 PM

Hey fellas,

I'm running into a little issue with space between the OEM 11" brake Booster and my shift linkage for the 4l60e. I'm using the Lokar Cable linkage and the bracket that the cable end hooks too, doesn't allow the booster to bolt up.

My questions is, can I use a smaller booster (something similar to this http://www.summitracing.com/parts/sum-760121-blk ), and still be ok?

Engine is 03 5.3 with Zo6 cam, in a 77.

Thanks,
Justin

JNJchev77 · 01-02-2013, 05:29 PM

Well, did a little more research and found that I should go no smaller than an 8" diaphragm, should be ok with the dual 8" then. In case anyone needed that info

.

Now just have to make sure it bolts up to my factory bracket

01-02-2013, 01:02 PM	#1
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Brake Booster Options Hey fellas, I'm running into a little issue with space between the OEM 11" brake Booster and my shift linkage for the 4l60e. I'm using the Lokar Cable linkage and the bracket that the cable end hooks too, doesn't allow the booster to bolt up. My questions is, can I use a smaller booster (something similar to this http://www.summitracing.com/parts/sum-760121-blk ), and still be ok? Engine is 03 5.3 with Zo6 cam, in a 77. Thanks, Justin __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo

01-02-2013, 05:29 PM	#2
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Brake Booster Options Well, did a little more research and found that I should go no smaller than an 8" diaphragm, should be ok with the dual 8" then. In case anyone needed that info . Now just have to make sure it bolts up to my factory bracket __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.