Wallowing 60 SGMC Sub

[Big Fenders]

I figured I'd throw this out with you guys for your input. 1960 GMC sub [torsion bar suspension] and it has a lot of body roll with normal driving. New shocks, alignment is dead on [tracks straight] . I know this is a big vehicle but any improvment ideas appreciated. I don't think a sway bar is made for this year sub .
Bob

[jonzcustomshop]

seems like a 73-87 sway bar would still work even though you have the torsion suspension.

[Brad54]

I will have sway bars for the Torsion Bar trucks later this year. I've developed them, just waiting for the hardware from my manufacturer to install the second version of the prototype on my Sub.

My '61 feels like the door handles are going to scrape the ground when I go around corners.

-Brad

[MusicMan70]

Big Fenders, do you still have the GMC V6 under there?

[Big Fenders]

Originally Posted by MusicMan70

Big Fenders, do you still have the GMC V6 under there?

No I put in a 350 crate with a th350 tranny.
Bob

[hop sing]

Originally Posted by Brad54

I will have sway bars for the Torsion Bar trucks later this year. I've developed them, just waiting for the hardware from my manufacturer to install the second version of the prototype on my Sub.

My '61 feels like the door handles are going to scrape the ground when I go around corners.

-Brad

can u let me know when u get them ready to sell thx

[rs74]

My old 60 Panel was the same way. Alot of body roll. The T-bars were even cranked down a bit.

[Brad54]

Originally Posted by hop sing

can u let me know when u get them ready to sell thx

Once I've got them in-hand and ready for shipping, i'll buy a membership here and advertise them, and a couple other bits I'm going to produce.

-Brad

[hop sing]

Originally Posted by Brad54

Once I've got them in-hand and ready for shipping, i'll buy a membership here and advertise them, and a couple other bits I'm going to produce.

-Brad

THX BRUDDAH