|
01-29-2013, 04:51 PM
|
#1 |
|
Registered User
Join Date: Jan 2010
Location: Grimsby, Ontario
Posts: 205
|
67 C10 trim to Blazer
I'm wondering if someone can tell me if the trim for a 67 C10 short bed will fit a Blazer with a 67 front end? Maybe I could buy a lower bed front from a long box, suburban, or Panel truck that would be the correct distance from wheel arch to door. Possible other option would be to get a bit longer one and trim it down to fit. Any suggestion would be appreciated. I'm trying to avoid airbrushing the trim on though would be cool not cheap.
|
|
|
|
01-29-2013, 05:03 PM
|
#2 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,507
|
Re: 67 C10 trim to Blazer
Everything but the front bed sections should fit fine. You will need SWB rears and the aft cab sections would not be needed. LWB front bed moldings might be need to get enough length from the door to the rear wheels and a trim down test section before the final cut.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
01-29-2013, 05:08 PM
|
#3 |
|
Registered User
Join Date: Jan 2010
Location: Grimsby, Ontario
Posts: 205
|
Re: 67 C10 trim to Blazer
Thats what I was thinking but wanted to get a few opinions before ordering it all and cutting it up. I figured since I went to the trouble of converting this blazer in to a roadster with a 67 front end I wanted to put on the trim to go with it.
|
|
|
|
|
01-29-2013, 05:22 PM
|
#4 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,507
|
Re: 67 C10 trim to Blazer
Thinking 67 or the more complete 68 with the headlight/hood trim and a two-tone nose like the factory silver or ivory (off white)?
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
01-29-2013, 05:23 PM
|
#5 |
|
not enough hours in the day
Join Date: Jan 2009
Location: Axtell, NE
Posts: 550
|
Re: 67 C10 trim to Blazer
Here you go. The hard works already been done. http://www.mar-k.com/Catalog/catalog...temID%3d103141
I'm planning on using these when the time comes.
__________________
65 K-10 Short Step 68 C-50 70 K-5 85 K-10 & piles of spare parts |
|
|
|
|
01-29-2013, 05:29 PM
|
#6 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,507
|
Re: 67 C10 trim to Blazer
Funny I had just found that looking for a picture or a converted Blazer.
http://67-72chevytrucks.com/vboard/s...d.php?t=496532
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
01-29-2013, 05:48 PM
|
#7 |
|
Registered User
Join Date: Jan 2010
Location: Grimsby, Ontario
Posts: 205
|
Re: 67 C10 trim to Blazer
Wow great link to the Mar-k I was on their site and didn't notice that. Thanks ill order up a set.
Posted via Mobile Device |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
