collapsible steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vince1 · 02-15-2013, 03:03 PM

Hello, new to this forum so don't know my way around yet.

Anybody know if I can swap a collapsible shaft from a 67 into a 66 that has the rigid shaft?

dallas71 · 02-15-2013, 03:33 PM

i used a shaft from a 71 and had no problems just had to drill out the plastic piece to adjust....not sure if i had to....but it works great had it in there for over 3 years.

vince1 · 02-15-2013, 03:44 PM

Thanks,
I've got the 250 with 4 sp manual and 3.73 gears. Might be a good time to change the whole column and put in a 700R4. I thought the starter was going to be a problem because mine is 3 bolts to the bell housing but I just took it off and the block is drilled for the bolt up starter.

02-15-2013, 03:03 PM	#1
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,170	collapsible steering column Hello, new to this forum so don't know my way around yet. Anybody know if I can swap a collapsible shaft from a 67 into a 66 that has the rigid shaft?

02-15-2013, 03:33 PM	#2
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Re: collapsible steering column i used a shaft from a 71 and had no problems just had to drill out the plastic piece to adjust....not sure if i had to....but it works great had it in there for over 3 years. __________________ My 1966 LWB Truck My 1966 SWB Truck

02-15-2013, 03:44 PM	#3
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,170	Re: collapsible steering column Thanks, I've got the 250 with 4 sp manual and 3.73 gears. Might be a good time to change the whole column and put in a 700R4. I thought the starter was going to be a problem because mine is 3 bolts to the bell housing but I just took it off and the block is drilled for the bolt up starter.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.