Instrument panel

[jesseo]

I want to fill the tach and clock hole with a cool tach and clock w/o spending a ton of $$$. What is out there and if you have cool pics please post em.

[Lugnutz65]

Give us more info please. What year truck and what dash and instrument cluster are you working on?

[jesseo]

I have a 66 with the gauges and a large blank on the left and one on the right. I know a tach was an option on the right and a vacuum on the left. I would love a stock tach but the are way too expensive from what I have found.

[Lugnutz65]

This nice link might start you in the right direction. Shows how to install it and everything.

http://www.persh.org/pickup/TachDash.htm


He has lots of other good ideas about C10 trucks as well. Just visit the his page here. http://www.persh.org/pickup/IdeaPage.htm

[jesseo]

This is from "The Pumpkin" I would love to have this set up. This is the cluster I have w/o the cool tach and vacuum gauges. Bottom of page three bottom

http://67-72chevytrucks.com/vboard/s...=571094&page=3

[rideblue00]

check out my old thread, and how i did it

http://67-72chevytrucks.com/vboard/s...d.php?t=499570

[Lugnutz65]

RideBlue00,
Very nice tach install.

[jesseo]

Thanks Rideblue This is perfect.

[Snowbound]

Check around farm land for 3 and 5 ton trucks sitting and rotting. Many of these big trucks have the tach and air gauges. Picked mine up last week!
Posted via Mobile Device

[lasher78]

Originally Posted by Snowbound

Check around farm land for 3 and 5 ton trucks sitting and rotting. Many of these big trucks have the tach and air gauges. Picked mine up last week!
Posted via Mobile Device

ok say you find one of these bigger trucks, what all do you have to take with it to make it work on your truck if all you got is the idiot light cluster and how do you know if they work and arent in just as bad shape as yours.
Posted via Mobile Device