What did you do to your truck today? - Page 295 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

socaljess · 04-08-2013, 08:41 PM

setting up checking out how things will look

garett · 04-09-2013, 12:10 AM

put on new rear breaks

azdude1964 · 04-09-2013, 01:42 AM

changed the oil with brad penn
and balanced the front tires.

robber grin · 04-09-2013, 08:01 AM

Cool look SoCalJess.

robber grin · 04-09-2013, 08:05 AM

Thanks Chris!

luvbowties · 04-09-2013, 09:04 AM

Quote:

Originally Posted by markeb01

Thanks for sharing that they fit well. I'd like to add those to my truck someday, along with the chrome frames on the side glass. I think they'd upgrade the cab every bit as much as the stainless windshield trim.

Mark, hope you don't have to do like me: apply for an FHA loan

to purchase a pair! Of all parts for our trucks, the price of vent-windows has blown my mind about as much as any thing I easily recall. I ended up buying a fairly nice pair on Ebay--including good glass and chrome--and re-building them. Luckily, they made a very nice 'driver-quality-plus' set. Even lucked up later & sold my originals to a guy whose set was much worse than mine.
sam

socaljess · 04-09-2013, 01:22 PM

Thanks Robber
Posted via Mobile Device

garett · 04-09-2013, 04:39 PM

well painted front drums, and put in new sparkplugs, also bled brake lines!

robber grin · 04-09-2013, 08:56 PM

Cleaned, primered, and painted the front sway bar and mounting brackets.

Worked on repairs to my hacked up low floor tunnel cover while the parts were drying...

I hope to finish it up tomorrow.
rg

ole paint · 04-10-2013, 06:14 PM

Installed clutch master cyl and linkage, bent a line and bled. Works like a million bucks. Started on power booster, thanks to Captain Fab for the quality parts to work with.
Name: 130410_001.jpg
Views: 409
Size: 51.4 KB

Name: 130410_001.jpg
Views: 409
Size: 51.4 KB

Name: 130410_002.jpg
Views: 396
Size: 44.5 KB

Name: 130122_005.jpg
Views: 393
Size: 53.4 KB

78f1hundo · 04-10-2013, 08:29 PM

Wheel and tire sizes please!!!!!!!

Quote:

Originally Posted by socaljess

setting up checking out how things will look

robber grin · 04-10-2013, 08:48 PM

Installed factory front sway bar (78 burb) on drop frame brackets.

With the frame being boxed and a REZ kit, I had to drill and elongate some access holes for the wrench on each of the back two frame bracket mounting bolts, but it worked out okay.

I think I'll get fresh bushings since these had quite a few cracks show up after everything was all tightened up.

rg

T Smith · 04-10-2013, 09:02 PM

Spent the afternoon at the alignment shop....

socaljess · 04-10-2013, 09:15 PM

@78f1hundo im running 20 inch velocity 5 spoke wraped with 255/45/20 yokohamas parada spec x tires
Posted via Mobile Device

Bigru · 04-10-2013, 09:21 PM

Painted the front half of the 65 frame with POR-15.

Trsmotrhed · 04-10-2013, 09:34 PM

Quote:

Originally Posted by Bigru

Painted the front half of the 65 frame with POR-15.

Posted via Mobile Device

socaljess · 04-10-2013, 10:56 PM

[IMG]

[/IMG]Cleaned out old bed wood and took the inner wheel tubs out
Posted via Mobile Device

socaljess · 04-10-2013, 10:58 PM

[IMG]

[/IMG]Start sanding bed
Posted via Mobile Device

socaljess · 04-10-2013, 10:59 PM

Why are my pics so huge ????????
Posted via Mobile Device

dantimdad · 04-11-2013, 12:53 PM

Painted the bellhousing and moved the rear end up on a big wooden box to finish cleaning and painting it.

Steven

Bigru · 04-11-2013, 03:27 PM

Quote:

Originally Posted by Trsmotrhed

Posted via Mobile Device

Here you go..
Posted via Mobile Device

**chevy_man5** · 04-11-2013, 04:18 PM

Quote:

Originally Posted by Bigru

Here you go..
Posted via Mobile Device

Hey... that's not showing much frame! Nice 292 though!!

Bigru · 04-11-2013, 04:52 PM

Quote:

Originally Posted by chevy_man5

Hey... that's not showing much frame! Nice 292 though!!

Lol. I notice that after I sent it, but I did paint the 292 also.
Posted via Mobile Device

socaljess · 04-11-2013, 07:53 PM

Just finished sandblasting a arms and motor mounts [IMG]

[/IMG]
Posted via Mobile Device

**rideblue00** · 04-11-2013, 08:55 PM

I disassembled and painted my deluxe heater switch setup. I just dremeled the rivet heads off an painted it then drilled and tapped for a 4-40 machine screw right where the rivets were. Be careful not to drill through now! Really easy. I can't seem to add a photo from my phone as i don't know how. I will add it later from my computer.

Posted via Mobile Device
Posted via Mobile Device

04-08-2013, 08:41 PM	#7351
socaljess Registered User Join Date: May 2009 Location: CORONA CALIFORNIA Posts: 120	Re: What did you do to your truck today? setting up checking out how things will look __________________ project 66 flat n low

04-09-2013, 12:10 AM	#7352
garett Registered User Join Date: Jan 2013 Location: tacoma wa Posts: 35	Re: What did you do to your truck today? put on new rear breaks

04-09-2013, 01:42 AM	#7353
azdude1964 Registered User Join Date: Feb 2013 Location: tucson,az Posts: 179	Re: What did you do to your truck today? changed the oil with brad penn and balanced the front tires. __________________ efi 496bbc th350 custom brakes narrowed 9 coilover rear.

04-09-2013, 08:01 AM	#7354
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Cool look SoCalJess.

04-09-2013, 08:05 AM	#7355
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Thanks Chris!

04-09-2013, 01:22 PM	#7357
socaljess Registered User Join Date: May 2009 Location: CORONA CALIFORNIA Posts: 120	Re: What did you do to your truck today? Thanks Robber Posted via Mobile Device __________________ project 66 flat n low

04-09-2013, 04:39 PM	#7358
garett Registered User Join Date: Jan 2013 Location: tacoma wa Posts: 35	Re: What did you do to your truck today? well painted front drums, and put in new sparkplugs, also bled brake lines!

04-09-2013, 08:56 PM	#7359
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Cleaned, primered, and painted the front sway bar and mounting brackets. Worked on repairs to my hacked up low floor tunnel cover while the parts were drying... I hope to finish it up tomorrow. rg Attached Images

04-10-2013, 06:14 PM	#7360
ole paint Registered User Join Date: Sep 2012 Location: Dublin , Ca Posts: 3	Re: What did you do to your truck today? Installed clutch master cyl and linkage, bent a line and bled. Works like a million bucks. Started on power booster, thanks to Captain Fab for the quality parts to work with.

04-10-2013, 08:48 PM	#7362
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Installed factory front sway bar (78 burb) on drop frame brackets. With the frame being boxed and a REZ kit, I had to drill and elongate some access holes for the wrench on each of the back two frame bracket mounting bolts, but it worked out okay. I think I'll get fresh bushings since these had quite a few cracks show up after everything was all tightened up. rg Attached Images

04-10-2013, 09:02 PM	#7363
T Smith Registered User Join Date: Jan 2011 Location: Vicksburg, Mississippi Posts: 567	Re: What did you do to your truck today? Spent the afternoon at the alignment shop....

04-10-2013, 09:15 PM	#7364
socaljess Registered User Join Date: May 2009 Location: CORONA CALIFORNIA Posts: 120	Re: What did you do to your truck today? @78f1hundo im running 20 inch velocity 5 spoke wraped with 255/45/20 yokohamas parada spec x tires Posted via Mobile Device __________________ project 66 flat n low

04-10-2013, 09:21 PM	#7365
Bigru Registered User Join Date: Mar 2013 Location: Missouri City, Tx Posts: 321	Re: What did you do to your truck today? Painted the front half of the 65 frame with POR-15.

04-10-2013, 10:56 PM	#7367
socaljess Registered User Join Date: May 2009 Location: CORONA CALIFORNIA Posts: 120	Re: What did you do to your truck today? [IMG][/IMG]Cleaned out old bed wood and took the inner wheel tubs out Posted via Mobile Device __________________ project 66 flat n low

04-10-2013, 10:58 PM	#7368
socaljess Registered User Join Date: May 2009 Location: CORONA CALIFORNIA Posts: 120	Re: What did you do to your truck today? [IMG][/IMG]Start sanding bed Posted via Mobile Device __________________ project 66 flat n low



Register or Log In To remove these advertisements.

04-10-2013, 10:59 PM	#7369
socaljess Registered User Join Date: May 2009 Location: CORONA CALIFORNIA Posts: 120	Re: What did you do to your truck today? Why are my pics so huge ???????? Posted via Mobile Device __________________ project 66 flat n low

04-11-2013, 12:53 PM	#7370
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Painted the bellhousing and moved the rear end up on a big wooden box to finish cleaning and painting it. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

04-11-2013, 07:53 PM	#7374
socaljess Registered User Join Date: May 2009 Location: CORONA CALIFORNIA Posts: 120	Re: What did you do to your truck today? Just finished sandblasting a arms and motor mounts [IMG][/IMG] Posted via Mobile Device __________________ project 66 flat n low

04-11-2013, 08:55 PM	#7375
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,866	Re: What did you do to your truck today? I disassembled and painted my deluxe heater switch setup. I just dremeled the rivet heads off an painted it then drilled and tapped for a 4-40 machine screw right where the rivets were. Be careful not to drill through now! Really easy. I can't seem to add a photo from my phone as i don't know how. I will add it later from my computer. Posted via Mobile Device Posted via Mobile Device

Register or Log In To remove these advertisements.