|
05-12-2013, 01:44 PM
|
#1 |
|
Registered User
Join Date: Feb 2012
Location: nederland texas
Posts: 39
|
door window channel
where is a good supplier for window glass channel, for door glass on a 51 chevy truck, you might call it window channel with the felt , i havent had any luck at the local glass shops or online
|
|
|
|
05-12-2013, 01:55 PM
|
#2 |
|
Registered User
Join Date: Nov 2011
Location: Winlock Wa
Posts: 584
|
Re: door window channel
__________________
Retired and too busy to work. |
|
|
|
|
05-12-2013, 02:26 PM
|
#3 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,713
|
Re: door window channel
I've never had a problem with the local glass shops being able to get it for me in bulk lengths.
Do you have the stock 51 doors with the vent wings or do you have early doors with one piece windows with the metal channel around the glass? They do take completely different window channel. Number 8 on this page http://www.lmctruck.com/icatalog/ca/full.aspx?Page=15 should be almost everything a guys needs to do a stock 51 door glass. Or from the Brothers truck site. http://www.brotherstrucks.com/prodin...number=WCS0055
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 05-12-2013 at 02:32 PM. |
|
|
|
|
05-12-2013, 03:34 PM
|
#4 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: door window channel
Restoration specialties on line same stuff as stanpro smd repo places but cheaper
Posted via Mobile Device
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
05-12-2013, 10:57 PM
|
#5 |
|
Registered User
Join Date: Feb 2012
Location: nederland texas
Posts: 39
|
Re: door window channel
i removed my vent windows and have one piece glass from lmc
|
|
|
|
|
05-12-2013, 11:07 PM
|
#6 |
|
Registered User
Join Date: Feb 2012
Location: nederland texas
Posts: 39
|
Re: door window channel
man i guess i completely overlooked the kit from lmc that is what i need, i have several of their catalogs and thought i was thorough in my search, just didnt see em, i dont know how i didnt find them, anyway thanks for doin the job for me
|
|
|
|
|
05-27-2014, 09:38 AM
|
#7 |
|
Registered User
Join Date: Apr 2008
Location: Weston FL
Posts: 15
|
Re: door window channel
58' Chevy pickup. I am going to use Soffseal door and window rubber seal.
Eliminating vent window, converting to one piece door glass. Soffseal rep advised to use 8' universal window channel 9/16" high by 5/8" wide, part#SRC073. Has anyone used this channel? Would this be correct fit? If not, any recommendations for window channel supplier. |
|
|
|
|
05-27-2014, 10:45 AM
|
#8 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,713
|
Re: door window channel
You probably should have started a new thread on it Dansa2 as this thread was a year old on the last post. Some of the Task Force guys don't check AD truck related posts too close and vise versa to a point.
A local full service automotive glass shop should have bulk channel that will work on it with the frameless glass just fine.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
