|
05-25-2013, 12:58 PM
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: Indiana
Posts: 470
|
intake height
does anybody know how much space they have from the top of their truck intake to the hood clearance??
__________________
70 C10 working on a LSx swap  4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol |
|
|
|
05-26-2013, 02:14 AM
|
#2 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: intake height
Like 3.5" but I don't have the same truck.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
|
05-27-2013, 02:51 AM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: intake height
I have a 69, the hood shuts with an edel rpm/3/4" spacer, & a 4" K&N. I also have a 1 1/2" body drop on the old truck.....have not dropped the 5.3 across the rails yet, but my bet is that the hood will close, with the stock truck intake? Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
05-27-2013, 04:40 PM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Indiana
Posts: 470
|
Re: intake height
i am looking at putting a edelbrock rpm 7139 on my ls so I am trying to make sure it will fit
__________________
70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol |
|
|
|
|
05-27-2013, 07:35 PM
|
#5 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: intake height
Dimention A, looks to be the tallest height on the 7139 intake (10.2", from edelebrock site). Do you have a stock truck intake to compare? AL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
05-29-2013, 08:05 AM
|
#6 |
|
Registered User
Join Date: Aug 2012
Location: Indiana
Posts: 470
|
Re: intake height
yes I do
__________________
70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol |
|
|
|
|
05-29-2013, 10:58 PM
|
#7 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: intake height
I have a stock truck intake on my bench, & from a quick measure, I believe that the edelbrock intake #7139, will fit anywhere that the truck intake will. As stated, I do not have the 5.3 across the rails yet.... Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
06-02-2013, 11:31 AM
|
#8 |
|
Registered User
Join Date: Aug 2012
Location: Indiana
Posts: 470
|
Re: intake height
Thats been my thought thanks for the reassurance
Posted via Mobile Device
__________________
70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol |
|
|
|
 |
| Bookmarks |
|
|
\\ MY YOUTUBE CHANNEL
Linear Mode
