Power Steering lines & one other ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ben.Riley · 06-10-2013, 11:06 PM

Hey guys, I just mounted my ps pump and now I need to find lines that will fit in my setup. I have the gear box mounted with lines attached but they were cut, can anyone guide me to a year of truck I could take from to bold in or maybe a company that sells hoses I could use??

don't mind the beat up pump.. I just need to get her running.. then upgrade.

last question.. what is this bracket and does anyone of a clear pic of how its installed?

goes here I assume??

**MidLifer** · 06-11-2013, 11:35 AM

I replaced my pressure hose with NAPA Part # NPS 71634 and it fit fine.

For the return, I used bulk hose from the parts store between the fittings on the pump and the box.

Hope this helps.

**VetteVet** · 06-11-2013, 11:42 AM

The bracket goes in behind the grille under the hood latch and sits vertically for support.

Ben.Riley · 06-11-2013, 11:48 AM

MidLifer Thank you, I'll get that part and see what happens. Any tips help

VetteVet; I thought so.. I'll have to look at it again. Am I holding it the right way? or flip it?

**VetteVet** · 06-12-2013, 03:49 PM

That's the correct way, Here's a picture of mine.

Name: DCP_2362.jpg
Views: 119
Size: 64.9 KB

Ben.Riley · 06-12-2013, 11:21 PM

Thanks man! That's great. I appreciate the help guys!
Posted via Mobile Device

06-10-2013, 11:06 PM	#1
Ben.Riley Registered User Join Date: May 2013 Location: Pacifica, CA Posts: 35	Power Steering lines & one other ? Hey guys, I just mounted my ps pump and now I need to find lines that will fit in my setup. I have the gear box mounted with lines attached but they were cut, can anyone guide me to a year of truck I could take from to bold in or maybe a company that sells hoses I could use?? don't mind the beat up pump.. I just need to get her running.. then upgrade. last question.. what is this bracket and does anyone of a clear pic of how its installed? goes here I assume??

06-11-2013, 11:35 AM	#2
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: Power Steering lines & one other ? I replaced my pressure hose with NAPA Part # NPS 71634 and it fit fine. For the return, I used bulk hose from the parts store between the fittings on the pump and the box. Hope this helps.

06-11-2013, 11:42 AM	#3
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,719	Re: Power Steering lines & one other ? The bracket goes in behind the grille under the hood latch and sits vertically for support. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

06-11-2013, 11:48 AM	#4
Ben.Riley Registered User Join Date: May 2013 Location: Pacifica, CA Posts: 35	Re: Power Steering lines & one other ? MidLifer Thank you, I'll get that part and see what happens. Any tips help VetteVet; I thought so.. I'll have to look at it again. Am I holding it the right way? or flip it?

06-12-2013, 03:49 PM	#5
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,719	Re: Power Steering lines & one other ? That's the correct way, Here's a picture of mine. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

06-12-2013, 11:21 PM	#6
Ben.Riley Registered User Join Date: May 2013 Location: Pacifica, CA Posts: 35	Re: Power Steering lines & one other ? Thanks man! That's great. I appreciate the help guys! Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.