10in wide chevy truck rallys! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Looneybin · 07-14-2013, 06:57 PM

I picked these up about a year ago on a junk k5 I bought for parts. I kept them thinking hey cool these will look good on my 65. I just figured they were an option back then in the 70s but after doing some research I found chevy didn't make 10in wide rallys for the trucks. Fast forward to now. I have been sanding them down to respray them and put them under my lifted blazer. There were a few companies that would widen your stock wheels. they must be very rare. I have never seen them before on anything else and have only found one pic of a set online. Does anyone have some pictures of some. Painting mine a little darker metallic grey with new trim rings.

Looneybin · 07-14-2013, 06:58 PM

compared to a stock 8in

Looneybin · 07-14-2013, 06:59 PM

two sanded and primed

Looneybin · 07-14-2013, 07:02 PM

what they are going on

POS1 · 07-14-2013, 08:31 PM

That's very cool. In the Porsche world there are a few guys in Cali who'll take your 6" steelies and make them 8", 9", 10". Great find.
Posted via Mobile Device

dieseldawg142 · 07-15-2013, 12:31 AM

check out these guys, been around a long time & can make any size wheel you want. they also have 10" rally's
http://www.stocktonwheel.com/heavy_duty.html

Looneybin · 07-15-2013, 09:46 AM

Yea I believe Stockton built these. That was the only company I really found.
Posted via Mobile Device

**Warrens69GMC** · 07-15-2013, 03:32 PM

http://www.rallyamerica.com/Original...ed_Wheels.html

Looneybin · 07-20-2013, 02:16 PM

sanded them down, primed, and sanded again. finally got a break in the rain so I could get some color on them. now I need to get the tire mounded up and find a set of trim rings. do you guys think that a set of deep rings or thin rings would look better? they will be wrapped in a set of 35x12.50s. I was able to post photos before but the forum has changed something so I am now unable to post pics any bigger than a thumbnail. I will get some up once they are mounted.

**Stocker** · 07-20-2013, 02:36 PM

Quote:

Originally Posted by Looneybin

do you guys think that a set of deep rings or thin rings would look better?

As deep as the wheels are, I doubt you could find a set of wide rings that would fit properly. And even if you could, I think narrow trim rings would look much better.

05duramaxhd · 07-24-2013, 11:36 AM

been looking for a set of those!! nice find!! let me know if you run accross another set.

07-14-2013, 06:57 PM	#1
Looneybin Registered User Join Date: Jul 2012 Location: Monetta SC Posts: 51	10in wide chevy truck rallys! I picked these up about a year ago on a junk k5 I bought for parts. I kept them thinking hey cool these will look good on my 65. I just figured they were an option back then in the 70s but after doing some research I found chevy didn't make 10in wide rallys for the trucks. Fast forward to now. I have been sanding them down to respray them and put them under my lifted blazer. There were a few companies that would widen your stock wheels. they must be very rare. I have never seen them before on anything else and have only found one pic of a set online. Does anyone have some pictures of some. Painting mine a little darker metallic grey with new trim rings. Attached Images

07-14-2013, 06:58 PM	#2
Looneybin Registered User Join Date: Jul 2012 Location: Monetta SC Posts: 51	Re: 10in wide chevy truck rallys! compared to a stock 8in Attached Images

07-14-2013, 06:59 PM	#3
Looneybin Registered User Join Date: Jul 2012 Location: Monetta SC Posts: 51	Re: 10in wide chevy truck rallys! two sanded and primed Attached Images

07-14-2013, 07:02 PM	#4
Looneybin Registered User Join Date: Jul 2012 Location: Monetta SC Posts: 51	Re: 10in wide chevy truck rallys! what they are going on Attached Images

07-14-2013, 08:31 PM	#5
POS1 Registered User Join Date: Jul 2011 Location: Houston, Texas Posts: 145	Re: 10in wide chevy truck rallys! That's very cool. In the Porsche world there are a few guys in Cali who'll take your 6" steelies and make them 8", 9", 10". Great find. Posted via Mobile Device __________________ - Brian FleetFilter.com 1991 Chevrolet V1500 Suburban 4x4 1986 Jeep CJ7 1969 Porsche 911S Targa

07-15-2013, 12:31 AM	#6
dieseldawg142 Registered User Join Date: Jul 2011 Location: back 40, bc Posts: 3,914	Re: 10in wide chevy truck rallys! check out these guys, been around a long time & can make any size wheel you want. they also have 10" rally's http://www.stocktonwheel.com/heavy_duty.html

07-15-2013, 09:46 AM	#7
Looneybin Registered User Join Date: Jul 2012 Location: Monetta SC Posts: 51	Re: 10in wide chevy truck rallys! Yea I believe Stockton built these. That was the only company I really found. Posted via Mobile Device

07-15-2013, 03:32 PM	#8
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,625	Re: 10in wide chevy truck rallys! http://www.rallyamerica.com/Original...ed_Wheels.html __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

07-20-2013, 02:16 PM	#9
Looneybin Registered User Join Date: Jul 2012 Location: Monetta SC Posts: 51	Re: 10in wide chevy truck rallys! sanded them down, primed, and sanded again. finally got a break in the rain so I could get some color on them. now I need to get the tire mounded up and find a set of trim rings. do you guys think that a set of deep rings or thin rings would look better? they will be wrapped in a set of 35x12.50s. I was able to post photos before but the forum has changed something so I am now unable to post pics any bigger than a thumbnail. I will get some up once they are mounted.

07-24-2013, 11:36 AM	#11
05duramaxhd Registered User Join Date: Jan 2013 Location: Newalla, OK Posts: 600	Re: 10in wide chevy truck rallys! been looking for a set of those!! nice find!! let me know if you run accross another set.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.