07-20-2013, 01:37 PM | #1 |
Registered User
Join Date: Dec 2011
Location: Blyth, Ontario, Canada
Posts: 187
|
tailgate interchange
are all 73-87 tailgates interchangeable, i have an 86 box that id like to put in a 75 tailgate but i want to know if it is going to fit before i spend the money
__________________
1986 LWB c10 w/327 & vortec heads |
07-20-2013, 01:47 PM | #2 |
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
Re: tailgate interchange
Yes with a few other things. I put an 83 gate on my 78 and i had to change the circle piece on the bottom of the bed. That was all i did.
Posted via Mobile Device
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
07-20-2013, 01:48 PM | #3 |
Registered User
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,267
|
Re: tailgate interchange
I could not fit an early tailgate onto my later box. A later tailgate fit the early box though.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate |
07-20-2013, 01:48 PM | #4 |
Registered User
Join Date: Dec 2011
Location: Blyth, Ontario, Canada
Posts: 187
|
Re: tailgate interchange
so all i have to do is change the hinges ?
__________________
1986 LWB c10 w/327 & vortec heads |
07-20-2013, 01:56 PM | #5 |
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
Re: tailgate interchange
I didn't even change those just the little round piece. SkinnyG said he can't so it might not work. I'd pop mine off get there see if it lines up and works right. I thought i had it sitting on the bumper while changing out round pieces and it fell off taking out my right townail so now i only have 9... Be careful they're heavy!
Posted via Mobile Device
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
07-20-2013, 04:53 PM | #6 |
Registered User
Join Date: May 2007
Location: CO
Posts: 475
|
Re: tailgate interchange
The 73 to early 76 gates have 2 tabs near the top of the gate that slides into the bedsides. If the gate your looking at doesn't have these, changing out the hinge hardware should be all you need to do.
Edit: look at the third picture in this post to see what I'm talking about. http://67-72chevytrucks.com/vboard/s...light=tailgate Last edited by Prong; 07-20-2013 at 05:00 PM. Reason: link added |
07-20-2013, 06:15 PM | #7 |
Registered User
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,267
|
Re: tailgate interchange
The later bed I have had thick rubber blocks near the top of the bed sides. These got in the way of the earlier tailgate sides. I removed the rubber blocks, but then the tailgate stays hit the rubber blocks at the bottom and it still wouldn't close. I ended up buying a tailgate that matched the box that was in better shape than the old one I was trying to "save."
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate |
Bookmarks |
|
|