Blazer half cabs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 08-11-2013, 04:50 AM

Anyone know how many different companies made half cab kits for Blazers? I found one today and its all steel, (steel top and bulkhead). It seems I remember one that used a fiberglass top.
Posted via Mobile Device

**jaros44sr** · 08-11-2013, 09:21 AM

Mine is fibreglass made by MTP in Minn.

20130811_091608 by jarosaj, on Flickr

**raggedjim** · 08-14-2013, 05:13 PM

Mine is also fiberglass, I have never seen a steel one.

If you get a chance post pics of it.

Rg

BLAZERMAN · 08-14-2013, 07:45 PM

Sorry for the crappy cell phone pics. I've seen a few of the fiberglass versions and didn't realize they were still being produced. The guy is asking for 800 for this one.
Posted via Mobile Device

BLAZERMAN · 08-14-2013, 07:46 PM

Another
Posted via Mobile Device

BLAZERMAN · 08-14-2013, 07:46 PM

Last one
Posted via Mobile Device

**raggedjim** · 08-15-2013, 09:55 AM

That's interesting, the bulhead looks like mine.

I don't think they still make the fiberglass cabs (every few years or so I hear rumors about it, but as far as I know they don't)

Thanks, Rg

RLONG · 08-15-2013, 12:50 PM

Bought a fiberglass one last year from a guy in Dallas said he was not going to make anymore materials were to high to make any money. Anyone know where you can find a bulkhead?

**jaros44sr** · 08-16-2013, 11:46 AM

Quote:

Originally Posted by RLONG

Bought a fiberglass one last year from a guy in Dallas said he was not going to make anymore materials were to high to make any money. Anyone know where you can find a bulkhead?

The bulkhead wasnt a very complicated piece to make, any sheetmetal shop should be able to bend one up for you....i sold mine to luv2xlr8, im using a pickup header panel, didnt like the way the bulkhead fit

Rustyparts had the demensions on one of his posts, i think, if not maybe you could contact craig. Dont know if blazermans panel is the same as a fibreglass one....

**jav418** · 08-17-2013, 01:27 AM

Blazerman If you dont buy it can you PM the guys info I would love to buy it.

thanks.

RLONG · 08-20-2013, 05:17 PM

Thanks for info I have somewhere the spec's. Thinking of using alum checker for back with alum angle.

djtlaz · 08-22-2013, 11:17 AM

Quote:

Originally Posted by jaros44sr

Mine is fibreglass made by MTP in Minn.

20130811_091608 by jarosaj, on Flickr

What did that run you?

**jaros44sr** · 08-22-2013, 06:08 PM

Quote:

Originally Posted by djtlaz

What did that run you?

I think a little over a thousand, board member and i split the shipping from your neck of the woods. I think shipping was four hundred...

Wierd part about the deal was i showed a picture of it to the wifey, kidding that it would look awesome on my truck, and she said go for it, and bought it immediately sight unseen

yoncey · 08-25-2013, 06:24 AM

Found this on the web!!!!!!!!

http://sexyhalftop.com/

mcmlxix · 09-05-2013, 07:49 AM

I want to see a half top with the Escalade EXT (Avalanche) triangles and third brake light....

fxdxharley · 09-05-2013, 01:07 PM

I like the sexy half top. wonder how much it is.
did you guys notice that blzr has a bench seat?

bcdeutsch731 · 09-10-2013, 09:11 AM

I would love to buy one for my 72 blazer if anyone knows where one is for sale.

**jaros44sr** · 09-10-2013, 11:20 AM

Quote:

Originally Posted by bcdeutsch731

I would love to buy one for my 72 blazer if anyone knows where one is for sale.

Youll just have to wait, and keep your eyes open. Only saw three come up for sale in the last six years, and i bought one. There was one for sale three months ago in the classified section, but i think it sold.....

If i see one, ill let you know

You could post a WTB, but you would have to be blue

FireBros. · 09-10-2013, 12:08 PM

Quote:

Originally Posted by yoncey

Found this on the web!!!!!!!!

http://sexyhalftop.com/

I contacted this guy on price and availability, about a month ago.He said he isn't making them at this time, but he would put me on his list.
Posted via Mobile Device

bcdeutsch731 · 09-10-2013, 12:23 PM

Quote:

Originally Posted by FireBros.

I contacted this guy on price and availability, about a month ago.He said he isn't making them at this time, but he would put me on his list.
Posted via Mobile Device

He has been taking names for 10 years now, and still hasn't made any except for this one.

**jaros44sr** · 09-10-2013, 02:00 PM

Somebody bought the molds from my top, i think...se if juriasic 1 has any info. on the person

Boneyard · 09-12-2013, 04:13 PM

That would be me. I'm having a hard time finding someone to produce 2 or 3 at a time for a reasonable price. The way it looks now I would have to sell them for 1500 each.

skorpioskorpio · 09-12-2013, 05:01 PM

Jaro, how much does yours weigh? ...about

**jaros44sr** · 09-12-2013, 06:05 PM

Quote:

Originally Posted by skorpioskorpio

Jaro, how much does yours weigh? ...about

Hard to really tell, but can lift it myself, i would guess between 100-200

skorpioskorpio · 09-12-2013, 06:08 PM

That's a whole lot better than 300-400lbs.

08-11-2013, 04:50 AM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Blazer half cabs Anyone know how many different companies made half cab kits for Blazers? I found one today and its all steel, (steel top and bulkhead). It seems I remember one that used a fiberglass top. Posted via Mobile Device __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-11-2013, 09:21 AM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: Blazer half cabs Mine is fibreglass made by MTP in Minn. 20130811_091608 by jarosaj, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

08-14-2013, 05:13 PM	#3
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Re: Blazer half cabs Mine is also fiberglass, I have never seen a steel one. If you get a chance post pics of it. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

08-14-2013, 07:45 PM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Blazer half cabs Sorry for the crappy cell phone pics. I've seen a few of the fiberglass versions and didn't realize they were still being produced. The guy is asking for 800 for this one. Posted via Mobile Device Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-14-2013, 07:46 PM	#5
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Blazer half cabs Another Posted via Mobile Device Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-14-2013, 07:46 PM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Blazer half cabs Last one Posted via Mobile Device Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-15-2013, 09:55 AM	#7
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Re: Blazer half cabs That's interesting, the bulhead looks like mine. I don't think they still make the fiberglass cabs (every few years or so I hear rumors about it, but as far as I know they don't) Thanks, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

08-15-2013, 12:50 PM	#8
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Blazer half cabs Bought a fiberglass one last year from a guy in Dallas said he was not going to make anymore materials were to high to make any money. Anyone know where you can find a bulkhead?

08-17-2013, 01:27 AM	#10
jav418 Junior Member Join Date: Aug 2010 Location: Sunnyvale, CA Posts: 66	Re: Blazer half cabs Blazerman If you dont buy it can you PM the guys info I would love to buy it. thanks.

08-20-2013, 05:17 PM	#11
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Blazer half cabs Thanks for info I have somewhere the spec's. Thinking of using alum checker for back with alum angle.

08-25-2013, 06:24 AM	#14
yoncey Registered User Join Date: Dec 2011 Location: Corona California Posts: 13	Re: Blazer half cabs Found this on the web!!!!!!!! http://sexyhalftop.com/

09-05-2013, 07:49 AM	#15
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Blazer half cabs I want to see a half top with the Escalade EXT (Avalanche) triangles and third brake light.... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

09-05-2013, 01:07 PM	#16
fxdxharley Just a nother gear head Join Date: Jul 2009 Location: Barrington NH Posts: 501	Re: Blazer half cabs I like the sexy half top. wonder how much it is. did you guys notice that blzr has a bench seat? __________________ 2013 HD FLHX 2000 chevy 2500 6.0l 4x4 3dr 2000 harley fxdx 71 Jimmy 4x4- future crawler/ woods rig 71 blazer (C4 2wd conv project) http://67-72chevytrucks.com/vboard/s...d.php?t=523589

09-10-2013, 09:11 AM	#17
bcdeutsch731 Registered User Join Date: Mar 2010 Location: West Chicago, IL Posts: 140	Re: Blazer half cabs I would love to buy one for my 72 blazer if anyone knows where one is for sale. __________________ 1969 C10, 2005 LLY Duramax, Wagler Competition built motor, Bullseye Power triple Turbo's, Rossler th400, Neal Chance Racing Converter, Danville Performance tunning. 8.3@168mph 1700+ HP

09-10-2013, 02:00 PM	#21
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: Blazer half cabs Somebody bought the molds from my top, i think...se if juriasic 1 has any info. on the person __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

09-12-2013, 04:13 PM	#22
Boneyard Registered User Join Date: Apr 2004 Location: Waverly, NE Posts: 41	Re: Blazer half cabs That would be me. I'm having a hard time finding someone to produce 2 or 3 at a time for a reasonable price. The way it looks now I would have to sell them for 1500 each.

09-12-2013, 05:01 PM	#23
skorpioskorpio Registered User Join Date: Nov 2010 Location: Los Angeles, CA Posts: 1,018	Re: Blazer half cabs Jaro, how much does yours weigh? ...about

09-12-2013, 06:08 PM	#25
skorpioskorpio Registered User Join Date: Nov 2010 Location: Los Angeles, CA Posts: 1,018	Re: Blazer half cabs That's a whole lot better than 300-400lbs.

Register or Log In To remove these advertisements.