Paying it forward!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

54 jimmy · 07-24-2013, 09:23 PM

yes guys let's follow the rules. so we can help each other out here. thanks.

kcsa75 · 07-24-2013, 09:40 PM

Quote:

Originally Posted by Dan in Pasadena

Thanks Bill!

Pay attention you guys:
No sellin'
No tradin'

And while we're at it, no spittin' or cussin' either, lol.

jackson · 07-24-2013, 10:52 PM

sorry guys. my bad

focusedontheprize · 07-30-2013, 08:24 AM

Bttt

av8tr33337 · 07-30-2013, 10:40 PM

Just wanted to give a big shout out to XPICKUP who generously hooked me up with some drop spindles for my AD-S10 project. I can't thank him enough. Just another examples of the great members on this forum willing to go the extra mile to help out a fellow truck enthusiast. Now I have got to get them installed!! I'll be having some foot surgery in the next couple weeks and I'll be laid up for about 6-8 weeks after that, but these spindles definitely put me closer to getting this thing put back together, I'll be chomping at the bit to get back on it in the weeks to come.

Thanks Again XPICKUP!

focusedontheprize · 07-31-2013, 11:24 AM

I like this idea a lot so I will go through my stuff when I am home next weekend to see what else I have.

Also I might put together a spreadsheet (if it is okay) with the mods to make it easier for people to see what we have available?

xpickup · 07-31-2013, 01:57 PM

No problem Bartman. I knew you could use them. Good luck on your surgery.

Shannon
Posted via Mobile Device

63 & 64 Bowties · 08-04-2013, 08:49 PM

This is now a "top-of-the-page" sticky in case you hadn't noticed.
Let's all follow the forum rules and make this great.

pvienneau · 08-05-2013, 08:00 AM

Edited by Forum Staff
Please read the rules. If you're looking for a part, become a supporting member of the forum and post a WTB. This is a post for people who have parts left over that they're generously willing to give to other members. It's not a post for members to beg for free parts.

av8tr33337 · 08-05-2013, 10:43 AM

Quote:

Originally Posted by RedneckRodder

Please guys, FOLLOW THE RULES! This is a good thing we have going here, don't screw it up for everybody else.

This is a "free parts available" thread, not a "I want free stuff" thread..........

If you see a listing for something you could use, PM the member who listed the part.

Posted via Mobile Device

Please follow the rules so we don't loose this thread
Posted via Mobile Device

fabguy · 08-05-2013, 12:19 PM

Please don't get this thread closed a it is helping us ALL out, read and follow the rules of the site. Bowtie has provided a link to them a few posts above yours and also they are on every page near the top.
Posted via Mobile Device

pvienneau · 08-06-2013, 11:39 AM

Not my intention to get this thread removed. Became a paid member today. WTF is WTB? I will also post a list of items up for grab. I can also help out with the forum from a technical perspective if need be? I have 20+ years in the software industry with access to many resources.

BTW - is it time to split out the forum to AD and TF?

missinfishin10 · 08-06-2013, 04:21 PM

Quote:

Originally Posted by thump16

I have two stepside fenders left and right and spare tire holder.
Posted via Mobile Device

PM sent Thump16

ghettoluxury · 08-06-2013, 06:06 PM

Quote:

Originally Posted by pvienneau

Not my intention to get this thread removed. Became a paid member today. WTF is WTB?

BTW - is it time to split out the forum to AD and TF?

WTB is Want To Buy, there is a forum in the for sale section just for it.

nvrdone · 08-06-2013, 07:46 PM

Some one pm'd me about my window winders but I lost it. Please resend.

**1project2many** · 08-06-2013, 08:21 PM

Original 2bbl intake manifold from '58 283. Casting no 3746826 dated Feb 24, 1958 (B248). Manifold was cleaned up including removing heat shield on bottom to clean out carbon. This was done in '92 when I put my truck on the road, but the manifold was removed shortly after to go EFI. Does not include wire type distributor hold down.

2bbl Rochester carburetor number 7029105. Original application 1969 C10. Used with manifold above for short time. Carb was rebuilt when truck was put on the road and appears to be in good shape but may need gaskets after sitting for many years. This is a "small" or "early" 2bbl and will not work on the "large" 2bbl manifolds.

You cover shipping!

pvienneau · 08-07-2013, 02:06 PM

AD Water PUMP, needs work. PM me if interested.
AD Fuel Pump. Dont know if it still works. PM me if interested.

hwyspirit · 08-07-2013, 05:20 PM

is paying it forward just an American thread or can members from Canada post here also???

**arturo7** · 08-07-2013, 07:35 PM

Three-on-the-tree shifter from '59.

pvienneau · 08-10-2013, 04:12 PM

Ordered a dozen 2" dome disc expansion plugs and will never use them all. Let me know if anyone needs any. They go to the back and front of stove bolt engines.

NEWFISHER · 08-18-2013, 02:15 PM

Firewall mat and cowl vent assembly paid forward
Posted via Mobile Device

focusedontheprize · 08-20-2013, 08:04 AM

Pay it Forward List Attached (Word Doc)

Created a rough list of the parts available. Just post if you still have the parts or not. I have a running Excel sheet also so I will keep it updated.

**1project2many** · 08-20-2013, 03:08 PM

Still have the parts.

nvrdone · 08-20-2013, 07:21 PM

still have parts, plus I found 2 parking light assys.

pvienneau · 08-20-2013, 07:45 PM

dito

07-24-2013, 09:23 PM	#26
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,184	Re: Paying it forward!!!! yes guys let's follow the rules. so we can help each other out here. thanks. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter)

07-24-2013, 10:52 PM	#28
jackson Registered User Join Date: Jan 2012 Location: el campo texas Posts: 322	Re: Paying it forward!!!! sorry guys. my bad

07-30-2013, 08:24 AM	#29
focusedontheprize Registered User Join Date: Feb 2012 Location: CA Posts: 846	Re: Paying it forward!!!! Bttt __________________ "Dixie" - 1988 Chevrolet V30 CC DRW "3+3" \| 7.4L 454 (L19) \| TH400 \| 4" lift \| 35"s "Lucille" - 1949 Chevrolet 3100 (on hold)

07-30-2013, 10:40 PM	#30
av8tr33337 Registered User Join Date: Mar 2009 Location: Derby Kansas Posts: 564	Re: Paying it forward!!!! Just wanted to give a big shout out to XPICKUP who generously hooked me up with some drop spindles for my AD-S10 project. I can't thank him enough. Just another examples of the great members on this forum willing to go the extra mile to help out a fellow truck enthusiast. Now I have got to get them installed!! I'll be having some foot surgery in the next couple weeks and I'll be laid up for about 6-8 weeks after that, but these spindles definitely put me closer to getting this thing put back together, I'll be chomping at the bit to get back on it in the weeks to come. Thanks Again XPICKUP! __________________ av8tr33337 AKA Bartman Email av8tr33337@yahoo.com Bartman's Ad-S10 Chassis Swap http://67-72chevytrucks.com/vboard/s...d.php?t=415418 My First Youtube Video http://www.youtube.com/watch?v=B6hSt...eature=channel More Pics of the 51 Project http://s668.photobucket.com/albums/v...hassis%20Swap/ 1951 3100 Pickup

07-31-2013, 11:24 AM	#31
focusedontheprize Registered User Join Date: Feb 2012 Location: CA Posts: 846	Re: Paying it forward!!!! I like this idea a lot so I will go through my stuff when I am home next weekend to see what else I have. Also I might put together a spreadsheet (if it is okay) with the mods to make it easier for people to see what we have available? __________________ "Dixie" - 1988 Chevrolet V30 CC DRW "3+3" \| 7.4L 454 (L19) \| TH400 \| 4" lift \| 35"s "Lucille" - 1949 Chevrolet 3100 (on hold)

07-31-2013, 01:57 PM	#32
xpickup Registered User Join Date: Jan 2007 Location: York, Pa. Posts: 1,386	Re: Paying it forward!!!! No problem Bartman. I knew you could use them. Good luck on your surgery. Shannon Posted via Mobile Device __________________ 48 Panel Truck 1948 Chevy / S10 1954 Chevy / S10 1951 Chevy / C4 47 Step van Lowered 1996 Dually

08-04-2013, 08:49 PM	#33
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Paying it forward!!!! This is now a "top-of-the-page" sticky in case you hadn't noticed. Let's all follow the forum rules and make this great. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

08-05-2013, 08:00 AM	#34
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Paying it forward!!!! Edited by Forum Staff Please read the rules. If you're looking for a part, become a supporting member of the forum and post a WTB. This is a post for people who have parts left over that they're generously willing to give to other members. It's not a post for members to beg for free parts. __________________ Pat 1949 unmolested Indy Farm Deluxe AD 1949 Standard 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=581544 Last edited by 63 & 64 Bowties; 08-05-2013 at 08:54 PM. Reason: forum infraction

08-05-2013, 12:19 PM	#36
fabguy Elev8r Man Join Date: Aug 2010 Location: Glendora, CA Posts: 835	Re: Paying it forward!!!! Please don't get this thread closed a it is helping us ALL out, read and follow the rules of the site. Bowtie has provided a link to them a few posts above yours and also they are on every page near the top. Posted via Mobile Device __________________ 1955.2 C4 Carry-all / Suburban ---> 55.2 Build Thread!! 1958 Fleetside SWB ---> 58 Fleetside Build thread 1939 2 door sedan *My F.B. project page.*

08-06-2013, 11:39 AM	#37
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Paying it forward!!!! Not my intention to get this thread removed. Became a paid member today. WTF is WTB? I will also post a list of items up for grab. I can also help out with the forum from a technical perspective if need be? I have 20+ years in the software industry with access to many resources. BTW - is it time to split out the forum to AD and TF? __________________ Pat 1949 unmolested Indy Farm Deluxe AD 1949 Standard 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=581544

08-06-2013, 07:46 PM	#40
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,487	Re: Paying it forward!!!! Some one pm'd me about my window winders but I lost it. Please resend.

08-06-2013, 08:21 PM	#41
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,205	Re: Paying it forward!!!! Original 2bbl intake manifold from '58 283. Casting no 3746826 dated Feb 24, 1958 (B248). Manifold was cleaned up including removing heat shield on bottom to clean out carbon. This was done in '92 when I put my truck on the road, but the manifold was removed shortly after to go EFI. Does not include wire type distributor hold down. 2bbl Rochester carburetor number 7029105. Original application 1969 C10. Used with manifold above for short time. Carb was rebuilt when truck was put on the road and appears to be in good shape but may need gaskets after sitting for many years. This is a "small" or "early" 2bbl and will not work on the "large" 2bbl manifolds. You cover shipping!

08-07-2013, 02:06 PM	#42
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Paying it forward!!!! AD Water PUMP, needs work. PM me if interested. AD Fuel Pump. Dont know if it still works. PM me if interested. __________________ Pat 1949 unmolested Indy Farm Deluxe AD 1949 Standard 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=581544

08-07-2013, 05:20 PM	#43
hwyspirit Registered User Join Date: Aug 2013 Location: Grande Prairie, Alberta Posts: 2	Re: Paying it forward!!!! is paying it forward just an American thread or can members from Canada post here also???

08-07-2013, 07:35 PM	#44
arturo7 Senior Member Join Date: Jul 2012 Location: huntington beach Posts: 845	Re: Paying it forward!!!! Three-on-the-tree shifter from '59. __________________ ever forward build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=542073



Register or Log In To remove these advertisements.

08-10-2013, 04:12 PM	#45
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Paying it forward!!!! Ordered a dozen 2" dome disc expansion plugs and will never use them all. Let me know if anyone needs any. They go to the back and front of stove bolt engines. __________________ Pat 1949 unmolested Indy Farm Deluxe AD 1949 Standard 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=581544

08-18-2013, 02:15 PM	#46
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Paying it forward!!!! Firewall mat and cowl vent assembly paid forward Posted via Mobile Device

08-20-2013, 03:08 PM	#48
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,205	Re: Paying it forward!!!! Still have the parts.

08-20-2013, 07:21 PM	#49
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,487	Re: Paying it forward!!!! still have parts, plus I found 2 parking light assys.

08-20-2013, 07:45 PM	#50
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Paying it forward!!!! dito __________________ Pat 1949 unmolested Indy Farm Deluxe AD 1949 Standard 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=581544

Register or Log In To remove these advertisements.