VT cutting up a 72 k5 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72k5zl1** · 09-24-2013, 07:47 PM

Quote:

Originally Posted by Gary 70 Jimmy

How bad is the driver side seat tracks I see one has a bent end is the steel thin on the bottom.

Here's a pic. Straightened it out
Posted via Mobile Device

**72k5zl1** · 09-24-2013, 08:31 PM

will split seat brackets i guess. $60 a side shipped work?

DeadPhish · 09-24-2013, 08:44 PM

ok 60 paypal? thanks

**72k5zl1** · 09-24-2013, 08:46 PM

Quote:

Originally Posted by DeadPhish

ok 60 paypal? thanks

sour@comcast.net for pass side only

**Gary 70 Jimmy** · 09-25-2013, 01:46 AM

Quote:

Originally Posted by 72k5zl1

rather sell as a set. make me an offer thats so good i want to split them up

Hows $70.00 shipped for both.

**72k5zl1** · 09-25-2013, 08:40 PM

Trevor. Sent you a shipping info. Both parts are boxed and riding around with me.
Posted via Mobile Device

**71blksuper4x4** · 09-25-2013, 09:09 PM

Glen, I went through adding things up. Paypal sent...let me know if I was off. Trevor
Posted via Mobile Device

**Gary 70 Jimmy** · 09-25-2013, 09:18 PM

I will take them for $50.00 shipped.

Quote:

Originally Posted by 72k5zl1

Here's a pic. Straightened it out
Posted via Mobile Device

**72k5zl1** · 09-27-2013, 06:46 AM

shipping today after work.

**Gary 70 Jimmy** · 09-27-2013, 10:35 AM

PM me your papal email so I can pay you for the seat tracks.

DeadPhish · 09-27-2013, 09:01 PM

I need to patch my Blazer's rear bed edge. Do you salvagable sections i can make a patch? thanks

Fesser · 09-28-2013, 11:47 AM

Any chance you have any extra inner brackets for the tire carrier. I don't even know if mine is a Hickey but I figure I can work with any inners better than starting from scratch. Frank

coopsK5 · 09-28-2013, 11:49 AM

If you're cutting up the body, how is the drivers side door b pillar? The previous owner cut the hell out of mine.

dansavo · 09-29-2013, 05:38 PM

Hey Glen payment sent for the rocker reinforcement plates.
Thanks

kaphillips · 10-09-2013, 12:59 PM

If the driver side seat track has not been sold I will take it for 60. Do you have the spring that goes between them. Also do you have the undercab support brace between the box rails that the front bucket seat brackets would have bolted to. If so how rusty is it.

kaphillips · 10-09-2013, 01:02 PM

here is a picture of the spring and cable if you have that go between the driver seat brackets.

kaphillips · 10-09-2013, 01:20 PM

Lets try that picture again. So its the spring and metal rod I am referring to.

72blazer_mud_bogger · 10-11-2013, 12:33 AM

do you still have the top

1972K20 · 10-11-2013, 09:25 PM

Glen, I sent you a PM.

blackbolt · 10-11-2013, 09:57 PM

Any of the spare tire carrier stuff still available? Thanks JJ

**BIGJAKE97** · 01-09-2014, 06:45 PM

Quote:

Originally Posted by lolife99

I will take the first fill tube ($50) you listed,... and the ECE panhard brackets ($10).
Let me know a total with shipping.
Thanks.

i know this is kind of an old thread, but do you still have the ece panhard brackets? i looked through all the replies and didn't see anybody say they wanted them. thanks, jake

**lolife99** · 01-09-2014, 06:58 PM

Quote:

Originally Posted by BIGJAKE97

i know this is kind of an old thread, but do you still have the ece panhard brackets? i looked through all the replies and didn't see anybody say they wanted them. thanks, jake

I bought them.

**BIGJAKE97** · 01-10-2014, 04:38 AM

oh, yeah. i see now. you found them on another thread and combined them with parts on this one. cool. thanks, jake

**72k5zl1** · 01-10-2014, 07:42 AM

its all gone but a nose and a couple of grills. i also heve the frame rails and all the brackets on them. still

TRUCKRUNNER67 · 01-22-2014, 10:17 PM

Do u still have the grills

09-24-2013, 08:31 PM	#177
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: cutting up a 72 k5 will split seat brackets i guess. $60 a side shipped work? __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

09-24-2013, 08:44 PM	#178
DeadPhish Registered User Join Date: Nov 2009 Location: Massapequa NY Posts: 27	Re: cutting up a 72 k5 ok 60 paypal? thanks

09-25-2013, 08:40 PM	#181
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: cutting up a 72 k5 Trevor. Sent you a shipping info. Both parts are boxed and riding around with me. Posted via Mobile Device Attached Images __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

09-25-2013, 09:09 PM	#182
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: cutting up a 72 k5 Glen, I went through adding things up. Paypal sent...let me know if I was off. Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

09-27-2013, 06:46 AM	#184
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: cutting up a 72 k5 shipping today after work. __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

09-27-2013, 10:35 AM	#185
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: cutting up a 72 k5 PM me your papal email so I can pay you for the seat tracks. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

09-27-2013, 09:01 PM	#186
DeadPhish Registered User Join Date: Nov 2009 Location: Massapequa NY Posts: 27	Re: cutting up a 72 k5 I need to patch my Blazer's rear bed edge. Do you salvagable sections i can make a patch? thanks

09-28-2013, 11:47 AM	#187
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: cutting up a 72 k5 Any chance you have any extra inner brackets for the tire carrier. I don't even know if mine is a Hickey but I figure I can work with any inners better than starting from scratch. Frank

09-28-2013, 11:49 AM	#188
coopsK5 Registered User Join Date: Jul 2013 Location: east greenville, pa Posts: 5	Re: cutting up a 72 k5 If you're cutting up the body, how is the drivers side door b pillar? The previous owner cut the hell out of mine.

09-29-2013, 05:38 PM	#189
dansavo Registered User Join Date: Sep 2011 Location: Vancouver, WA Posts: 41	Re: cutting up a 72 k5 Hey Glen payment sent for the rocker reinforcement plates. Thanks

10-09-2013, 12:59 PM	#190
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: cutting up a 72 k5 If the driver side seat track has not been sold I will take it for 60. Do you have the spring that goes between them. Also do you have the undercab support brace between the box rails that the front bucket seat brackets would have bolted to. If so how rusty is it.

10-09-2013, 01:02 PM	#191
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: cutting up a 72 k5 here is a picture of the spring and cable if you have that go between the driver seat brackets.

10-09-2013, 01:20 PM	#192
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: cutting up a 72 k5 Lets try that picture again. So its the spring and metal rod I am referring to. Attached Images

10-11-2013, 12:33 AM	#193
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: cutting up a 72 k5 do you still have the top

10-11-2013, 09:25 PM	#194
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: cutting up a 72 k5 Glen, I sent you a PM.



Register or Log In To remove these advertisements.

10-11-2013, 09:57 PM	#195
blackbolt Registered User Join Date: Jan 2008 Location: Pasadena, Texas Posts: 142	Re: cutting up a 72 k5 Any of the spare tire carrier stuff still available? Thanks JJ

01-10-2014, 04:38 AM	#198
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: cutting up a 72 k5 oh, yeah. i see now. you found them on another thread and combined them with parts on this one. cool. thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

01-10-2014, 07:42 AM	#199
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: cutting up a 72 k5 its all gone but a nose and a couple of grills. i also heve the frame rails and all the brackets on them. still __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

01-22-2014, 10:17 PM	#200
TRUCKRUNNER67 Registered User Join Date: Feb 2012 Location: jackson mo Posts: 32	Re: cutting up a 72 k5 Do u still have the grills

Register or Log In To remove these advertisements.