![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 164
|
Factory rear sway bar setup
Hello all,
Have a factory rear sway bar setup for sale. Includes the bar and spring plates. Will need new bushings and straps (sold as a kit from Energy) as well as end links. Factory installation requires downward facing u-bolts with 40.5" spring spacing (1-ton). 1/2 and 3/4 ton trucks used 42.5" spring spacing. May be able to make fit with axle flips, 1/2 tons, etc., but that is up to you. Just want to make the info available ![]() These are extremely rare, hate to sell this one. Looking for $150 + shipping. Can post pics if needed, working until morning ![]() Thanks, Joe Posted via Mobile Device |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 164
|
Re: Factory rear sway bar setup
Bump
![]() Joe Posted via Mobile Device |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jan 2012
Location: greenville pa 16125
Posts: 283
|
Re: Factory rear sway bar setup
will it fit on 1 ton single wheel ?
|
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 164
|
Re: Factory rear sway bar setup
Should be a direct bolt-on for any 30 series truck, as they use the narrow leaf spring spacing (40.5") and U-bolts that face down. So it should fit perfectly as long as you're a stock 1-ton
![]() Hope this helps, thanks ![]() Joe Posted via Mobile Device |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Jan 2012
Location: greenville pa 16125
Posts: 283
|
Re: Factory rear sway bar setup
could I see some pictures? where in pa are you? thanks
|
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 164
|
Re: Factory rear sway bar setup
Sure, I'll try to get some pics in the morning. Located in Jersey Shore, near Williamsport
![]() Thanks, Joe Posted via Mobile Device |
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2007
Location: Pennsylvania
Posts: 164
|
Re: Factory rear sway bar setup
Here are a few pics:
![]() ![]() ![]() Spring plates were cleaned and painted a few years back, but never run (so a quick topcoat to freshen them up). Bar is in great shape, just needs to be cleaned and painted if desired. Hope this helps, Joe Posted via Mobile Device |
![]() |
![]() |
Bookmarks |
|
|