|
10-30-2013, 12:01 AM
|
#1 |
|
Registered User
Join Date: Sep 2013
Location: Cheney, Kansas
Posts: 337
|
vacuum booster?
Hey guys, forgive me but I'm not real familiar with these cheaper black summit or mines jegs vacuum assist cans. Mine has a gauge that I can read but I don't know if that's ok to use when adjusting your fuel air screws on the carb for best vacuum or if I should continue using the vacuum gauge that I hook to the carb? Also, wouldn't the vacuum can effect your vacuum secondaries? Does it not effect the engine at all, just the brakes?
I just thought I would ask for a rundown on how they work and if carb tuning and vacuums secondaries are effected by them. Thanks.
__________________
Live and let live 
|
|
|
|
10-30-2013, 12:38 AM
|
#2 |
|
Registered User
Join Date: Sep 2013
Location: Cheney, Kansas
Posts: 337
|
Re: vacuum booster?
Also the vacuum advance. It works off of the engine after tip in when plugged into ported, losing vacuum at full throttle and the timing advance it offers going away. But does the can continue offering vacuum? Does the vacuum advanced need to be plugged when using these cans?
__________________
Live and let live
|
|
|
|
|
10-30-2013, 12:55 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: vacuum booster?
I had to read your post twice to understand what you're asking, and I assume you are referring to the vacuum reservior and not the vacuum assist brake booster?
The vacuum reservior is there to provide enough vacuum for your power brakes. Neither should affect the operation of your engine. If they do, then there is a leak in one of them. When tuning your engine I would continue to use your hand held vacuum test gauge. On a street driven vehicle, a vacuum advance on the distributor should always be used for the best driveability. On a performance application, the vacuum advance should be connected to manifold vacuum.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
10-30-2013, 01:48 AM
|
#4 |
|
Registered User
Join Date: Sep 2013
Location: Cheney, Kansas
Posts: 337
|
Re: vacuum booster?
Yeah that was what I was referring to. And I know the vacuum advance should be used on street vehicles which was why I asked. It wasn't hooked up and it got me thinking about it again when I was tuning the carb. I thought if it was there to increase and or provide more vacuum, would it effect those? I thought maybe the gauge could be used when tuning but I'll stick to the hand held unit, it's easier to read anyway. Its just, I though I had the same vacuum when tuning at the carb. as what was reading on the can. I'll have to check again and see if there two different readings.
__________________
Live and let live
|
|
|
|
|
10-31-2013, 12:09 AM
|
#5 |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: vacuum booster?
The vacuum reservior shouldn't have any effect on the vacuum advance.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
10-31-2013, 12:13 AM
|
#6 |
|
Registered User
Join Date: Sep 2013
Location: Cheney, Kansas
Posts: 337
|
Re: vacuum booster?
Ok, thanks guys. Sry I get to thinking to hard sometimes.
__________________
Live and let live
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
