Where to buy 205 Yokes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scrub · 12-09-2003, 11:26 PM

I want to put 1410 yokes on my 205 t-case. I know they are hard to find, but somebody makes them. I am looking for the GM style with the horseshoe straps. I have 32 spline shafts.

Thanks in advance.

fbzack · 12-10-2003, 03:16 AM

I would check out http://www.highangledriveline.com/

NAPCO ken · 12-10-2003, 12:26 PM

Or maybe try calling Parts Mike at 530-885-0673. He's in Auburn, CA and has good prices and is very helpful on the phone.

Scrub · 12-10-2003, 01:37 PM

I called Mike. What a nice guy. He is looking it up for me.

Thanks

Mike C · 12-10-2003, 02:52 PM

six states distributors has them and so does Tom Woods (who used to be at 6 states I think.)

NAPCO ken · 12-10-2003, 07:20 PM

Parts Mike is a top-notch guy!! I highly recommend him to anyone, although he mostly deals in Jeep and 4x4 off-road parts, axles, etc.

Scrub · 12-12-2003, 09:26 PM

I found that 6 States distributers had them on the shelf at the lowest price. My higehest price was 85 bucks, 6 states was $57.87.

http://www.sixstates.com/shops.html

They have stores in 3 states, go figure.

Thanks for your help.

I have a 205 32 spline flange on ebay if anyone need one.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2448354059

12-09-2003, 11:26 PM	#1
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	Where to buy 205 Yokes I want to put 1410 yokes on my 205 t-case. I know they are hard to find, but somebody makes them. I am looking for the GM style with the horseshoe straps. I have 32 spline shafts. Thanks in advance. __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

12-10-2003, 12:26 PM	#3
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	Or maybe try calling Parts Mike at 530-885-0673. He's in Auburn, CA and has good prices and is very helpful on the phone. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

12-10-2003, 01:37 PM	#4
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	I called Mike. What a nice guy. He is looking it up for me. Thanks __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

12-10-2003, 02:52 PM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,728	six states distributors has them and so does Tom Woods (who used to be at 6 states I think.) __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

12-10-2003, 07:20 PM	#6
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	Parts Mike is a top-notch guy!! I highly recommend him to anyone, although he mostly deals in Jeep and 4x4 off-road parts, axles, etc. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

12-10-2003, 03:16 AM	#2
fbzack Registered User Join Date: Aug 2002 Location: mill vallay ca Posts: 8	I would check out http://www.highangledriveline.com/

12-12-2003, 09:26 PM	#7
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	I found that 6 States distributers had them on the shelf at the lowest price. My higehest price was 85 bucks, 6 states was $57.87. http://www.sixstates.com/shops.html They have stores in 3 states, go figure. Thanks for your help. I have a 205 32 spline flange on ebay if anyone need one. http://cgi.ebay.com/ebaymotors/ws/eB...tem=2448354059 __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.