Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-13-2013, 02:05 AM | #1 |
Registered User
Join Date: Aug 2011
Location: Lethbridge Montana
Posts: 259
|
lowered original frame trucks
hey guys does any one have any pictures of 1947-54 chev trucks
lowered with original frame without IFS suspension front or any mods to the rear suspension i want to lower my truck just with using a drop axle and springs |
12-13-2013, 11:49 AM | #2 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: lowered original frame trucks
With a couple of leaves out of the front springs and 205 60 14 tires on 14x7 rims on the front.
255-60 15 tires on the back on 15x8 rims raise the back a bit higher than tires and wheels that matched the fronts would. There is about 1-1/2 inch between the cut down bumpers and the frame on the front and two and a half inches between the frame and the axle on the back.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
12-14-2013, 12:10 AM | #3 |
Registered User
Join Date: Aug 2011
Location: Lethbridge Montana
Posts: 259
|
Re: lowered original frame trucks
what rear end are you running and i like the picture thank you
|
Bookmarks |
|
|