![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Vintage Evil
Join Date: Aug 2005
Location: Hastings, Nebraska
Posts: 956
|
lower control arm bracket change?
Just wondered if any one has ever change the lower control arm brackets?
Looks like they are held in with a rivet... When taking the truck apart the other day i realized the alignment pin was sheared half way off... could be the reason i alway have problems with the header hitting the lower control arm on that side... I see LMC has them but not sure who else... just looking for anyone else to chime in with where they got part and how the change out was? Thanks |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,560
|
Re: lower control arm bracket change?
Haven't done this myself, but on one of the thread I saw where they removed the rivets, replaced the center pin with a regular socket head cap screw (to locate center) and two button head cap screws where the rivets were. They used locking nuts on the top, hope this helps...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#3 | |
Registered User
![]() Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
|
Re: lower control arm bracket change?
Quote:
Click on my '64 thread below, and look at Post #105. It has a detailed explanation of how I did it.
__________________
Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527 |
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,560
|
Re: lower control arm bracket change?
chevyrestroguy, you are 100% correct, it was your post that I saw the work done. Thanks for posting the number so he can check it out...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2013
Location: alvin, texas
Posts: 622
|
Re: lower control arm bracket change?
when I rebuilt the front end on my 67 all four brackets were loose and the locating pins on the front brackets were sheared off. I replaced the rivets with grade 8 3/8" bolts since the 9/16 head fit the shaft perfectly. I did have to put a 1/8" spacer under the front bolt for more engagement & I faced about .030 off the head of the rear bolt.
when I put in my new spindles I'm going to pull the control arms and drill the shafst for both pins like chevyrestroguy did
__________________
1967 C10 lwb two tone, 305 & rat fink style floor shifted 700r4, 20" steelies 2004 2500HD utility bed aka Brutus |
![]() |
![]() |
![]() |
#6 |
Vintage Evil
Join Date: Aug 2005
Location: Hastings, Nebraska
Posts: 956
|
Re: lower control arm bracket change?
Thanks for the info guys... I was thinking you would be able to skip the rivets and use bolts...
|
![]() |
![]() |
![]() |
Bookmarks |
|
|