The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-11-2014, 12:28 AM   #1
79 silverado
Account Suspended
 
Join Date: Nov 2004
Location: Rhode Island/Vermont
Posts: 583
Best Performing C/K Series Stock GM Brake System ???

Long story short, I'm thinking of re-doing the brakes on a project and keeping it for the long haul.

Is there a brake system off of any particular year of the c/k series that would perform best or have advantages over any other?

As part of the re-vamp I would have no issue with buying everything new from the master cylinder/vacuum booster/lines/prop valve/rotors/calipers/hoses/drums/shoes/etc. Most of these parts are either worn, old, or have something wrong with them to begin with.

Having said that, what would be the best performing set-up to use (ie which year) to go into a c10 with a 12bolt rear? I am concerned with stopping ability in heavy traffic and durability, do not care about bling factor which is why I am asking about stock configurations rather than the wilwood type stuff that actually has lower piston surface area than the stock stuff. It'll all be behind factory wheels anyways so nobody will see it. For the same reason, would be looking to just leave drums in the rear.

Is there an advantage to going to an 80s setup with the aluminum master cylinder over the cast iron one? (which I hear rumored is more friendly to occasional driving since the piston doesn't stick and blow out the seal)? Would the HD 1.25" rotors and such be worth the effort to upgrade to?

Is there a larger vacuum booster that would give any advantage over original?

I am primarily a newbie when it comes to brake system upgrades and the like so thoughts welcomed and appreciated.
79 silverado is offline   Reply With Quote
Old 01-11-2014, 01:23 AM   #2
Tdubbyount
Registered User
 
Tdubbyount's Avatar
 
Join Date: Mar 2013
Location: Ephrata WA
Posts: 140
Re: Best Performing C/K Series Stock GM Brake System ???

If you want more clamping force all together I'd go with a hydroboost system. It boosts using hydraulic pressure from your power steering pump. I'm pretty sure it came stock on all the diesels. I'm not sure if it uses a different master cylinder than the vac systems. You will need a different power steering pump because they run different pressures. It will be more expensive than going vacuum, but gives you some pretty dang good brakes.
__________________
1976...no...79...Chevy....wait...GMC shortbed 4x4. 5 inch lift on 35s, 355, sm465, daily driver. One day I'll figure out the story in that one.

1957 Chevy long stepper...not sure what I'm doing with that one yet. Awaiting funds I suppose.
Tdubbyount is offline   Reply With Quote
Old 01-11-2014, 07:13 AM   #3
Desert1957
Registered User
 
Desert1957's Avatar
 
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by Tdubbyount View Post
If you want more clamping force all together I'd go with a hydroboost system. It boosts using hydraulic pressure from your power steering pump. I'm pretty sure it came stock on all the diesels. I'm not sure if it uses a different master cylinder than the vac systems. You will need a different power steering pump because they run different pressures. It will be more expensive than going vacuum, but gives you some pretty dang good brakes.
"Hydro-Boost" system has no effect on brake "Clamping Force" it takes the place of a Vacuum booster for reduced pedal effort.

Its is uses on Diesels and HD one ton's.

Master Cylinder applies ALL brake pressure.

Desert
Desert1957 is offline   Reply With Quote
Old 01-11-2014, 11:57 AM   #4
INSIDIOUS '86
Registered User
 
INSIDIOUS '86's Avatar
 
Join Date: Jul 2009
Location: washington
Posts: 4,178
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by Desert1957 View Post
"Hydro-Boost" system has no effect on brake "Clamping Force" it takes the place of a Vacuum booster for reduced pedal effort.

Its is uses on Diesels and HD one ton's.

Master Cylinder applies ALL brake pressure.

Desert
Idk about that myself. The assist force is greatly increased and from what I've driven on some trucks the brakes are much stronger than vacuum booster style.

Although pressure is mostly subject to the master cylinder bore/travel than it is the booster/assist

As for op's question. I have the jb3 brakes on my 86 and love them. The jb3 booster and master cylinder feel perfect to me and react quick. Whereas the 70s trucks can standard with pretty much 3/4 ton brakes. I will have to look up bore size differences of the master cylinder through the years. But to me for some reason the lighter duty brakes seem to work better than heavy duty in at least the area of feel and reaction
A good upgrade is running 1.25 thick rotors on the front to help prolong the onset of brake fade. The next great upgrade you can do is get hawk hps brake pads. They bite a little more but don't needs I much heat like track pads would.

In a nutshell our truck brakes are pretty sufficient for most driving and can be upgraded pretty cheap with thicker rotors and nice pads. Unless you autocross which then maybe not so.
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac
3''spintech prostreet mufflers xpipe 1 3/4 headers
build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217
Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

Last edited by INSIDIOUS '86; 01-11-2014 at 12:07 PM.
INSIDIOUS '86 is offline   Reply With Quote
Old 01-11-2014, 06:58 PM   #5
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by INSIDIOUS '86 View Post
As for op's question. I have the jb3 brakes on my 86 and love them. The jb3 booster and master cylinder feel perfect to me and react quick.
JB5 system is perfect.

Feel, travel, effort are all right where I expect them to be - even after 27 years and 200,000 miles.

As a former brake development engineer for these trucks I can tell you it is the standard by which all other systems are judged.

K

Link to brake system release chart for 1987:

http://67-72chevytrucks.com/vboard/s...d.php?t=510519
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 01-11-2014, 09:18 PM   #6
Tdubbyount
Registered User
 
Tdubbyount's Avatar
 
Join Date: Mar 2013
Location: Ephrata WA
Posts: 140
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by Desert1957 View Post
"Hydro-Boost" system has no effect on brake "Clamping Force" it takes the place of a Vacuum booster for reduced pedal effort.

Its is uses on Diesels and HD one ton's.

Master Cylinder applies ALL brake pressure.

Desert
Sorry, I'll put it this way. If you don't want to use both feet and stand on it, a hydroboost unit will help you get more clamping force out of your brakes. From my experience, my hydroboost setup totally blows my brand new vacuum setup out of the water. And it's stopping a 3/4 ton on 35" tires rather than a 1/2 ton on 31s.
__________________
1976...no...79...Chevy....wait...GMC shortbed 4x4. 5 inch lift on 35s, 355, sm465, daily driver. One day I'll figure out the story in that one.

1957 Chevy long stepper...not sure what I'm doing with that one yet. Awaiting funds I suppose.
Tdubbyount is offline   Reply With Quote
Old 01-11-2014, 10:50 PM   #7
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,256
Re: Best Performing C/K Series Stock GM Brake System ???

My brothers 78 has a hydro boost in a 1/2 ton.
Doesn't stop any different than my
'73 in fact has a worse/funky pedal than a vacuum brake booster.
__________________
" That didnt make it any newer "
" Dont antique the equipment "
KQQL IT is offline   Reply With Quote
Old 01-11-2014, 11:59 PM   #8
aotte1
Registered User
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,645
Re: Best Performing C/K Series Stock GM Brake System ???

My head is stuffy tonight, what is JB5, the option code for GM brake package?
Thanks,
Les
aotte1 is offline   Reply With Quote
Old 01-12-2014, 03:29 AM   #9
INSIDIOUS '86
Registered User
 
INSIDIOUS '86's Avatar
 
Join Date: Jul 2009
Location: washington
Posts: 4,178
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by Keith Seymore View Post
JB5 system is perfect.

Feel, travel, effort are all right where I expect them to be - even after 27 years and 200,000 miles.

As a former brake development engineer for these trucks I can tell you it is the standard by which all other systems are judged.

K

Link to brake system release chart for 1987:

http://67-72chevytrucks.com/vboard/s...d.php?t=510519
The jb3 systems had 1" rotors and the jb5s had 1.25 rotors only yes? As well as the thicker boosters which are dual diaphragm?
This is on my 86
And this should be jb5 on my 78
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac
3''spintech prostreet mufflers xpipe 1 3/4 headers
build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217
Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511
INSIDIOUS '86 is offline   Reply With Quote
Old 01-12-2014, 10:52 AM   #10
79 silverado
Account Suspended
 
Join Date: Nov 2004
Location: Rhode Island/Vermont
Posts: 583
Re: Best Performing C/K Series Stock GM Brake System ???

Thanks for all the great responses and discussion, including (and especially) Keith for posting the brake sheets...

Is there an advantage to switching over to the system from say a 1987 that makes it worth while doing?

I have to assume that the factory stopped using the cast iron master cylinder for a reason, but not really sure what it was... cost/appearances or performance/durability?

I would be replacing everything top to bottom except the brake pedal, and I suppose could do that as well if required to get the best of performance/durability.

The only reason I would not consider a hydroboost arrangement is future motor swap potential... I'm not sure how well a possible lsx swap could be adapted to use the power steering pump for the brakes...
79 silverado is offline   Reply With Quote
Old 01-13-2014, 09:54 AM   #11
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by 79 silverado View Post
I have to assume that the factory stopped using the cast iron master cylinder for a reason, but not really sure what it was... cost/appearances or performance/durability?
Mass reduction was the primary motivation. Naturally, you get some corrosion improvement and appearance enhancement, too.

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 01-13-2014, 10:18 AM   #12
LEEVON
Moderator
 
LEEVON's Avatar
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,888
Re: Best Performing C/K Series Stock GM Brake System ???

I loved the JB5's on my '87, well balanced, strong, predictable, service-able. All around great brakes.
__________________
'20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids
LEEVON is offline   Reply With Quote
Old 01-18-2014, 08:51 AM   #13
Desert1957
Registered User
 
Desert1957's Avatar
 
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by Tdubbyount View Post
Sorry, I'll put it this way. If you don't want to use both feet and stand on it, a hydroboost unit will help you get more clamping force out of your brakes. From my experience, my hydroboost setup totally blows my brand new vacuum setup out of the water. And it's stopping a 3/4 ton on 35" tires rather than a 1/2 ton on 31s.
If you need both feet to stop your truck , Fix it before you kill someone....

Desert
Desert1957 is offline   Reply With Quote
Old 01-18-2014, 08:52 AM   #14
Desert1957
Registered User
 
Desert1957's Avatar
 
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
Re: Best Performing C/K Series Stock GM Brake System ???

Quote:
Originally Posted by KQQL IT View Post
My brothers 78 has a hydro boost in a 1/2 ton.
Doesn't stop any different than my
'73 in fact has a worse/funky pedal than a vacuum brake booster.
Exactly....
Desert1957 is offline   Reply With Quote
Old 01-18-2014, 03:44 PM   #15
Alex V.
Registered User
 
Alex V.'s Avatar
 
Join Date: Mar 2013
Location: Campbellsville, KY
Posts: 888
Re: Best Performing C/K Series Stock GM Brake System ???

My '85 single-wheel, 454/auto C3500 has hydro-boost brakes. The pedal doesn't travel nearly as far as vacuum-boost setups I've driven before you get a good application, but aside from getting used to the shorter pedal travel I've never had a problem with them - in many conditions, the wheels (especially the rears) will lock up before you run out of boost. I think a properly functioning vacuum-boosted system is more than adequate for most trucks (save for something extremely heavy or towing something heavy) but from my experience the hydro-boost is at least as good a system.

And, as with my '67 Suburban that has a dual-diaphragm booster on 4-wheel drum brakes... just don't expect it to stop like a new Corvette. Being another car's length closer to the guy in front of you won't get you to your destination 10 seconds faster.
__________________
Alex V.
------
1967 C10 Suburban, 350/NP435, Green/Green, PS, PB, HD cooling, charging, shocks, and springs.

1985 GMC C3500 SRW, Sierra Classic, 454/TH400, white/blue.
Alex V. is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com