Cam installed, exhaust video - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Expat_dude · 01-13-2014, 09:50 PM

Now we talking! I went from a .555 solid lifter cam to a Big Mutha Thumpr Hyd. Roller Cam
Lift: .533"/.519"
Duration: 299°/319°
Lobe Separation Angle: 107

Exhaust - Clear Image headers dumping into Magna Flow S/S exhaust with cross over

CST10 · 01-13-2014, 10:21 PM

Sounds nice!!!!

jmking9 · 01-13-2014, 10:24 PM

Looks and sounds great! Congratulations!

MashTheGas 72 · 01-13-2014, 10:56 PM

That's awesome Looks and Sound. What all have you done to the motor?

Expat_dude · 01-13-2014, 11:05 PM

Thanks! Here are some specs
355 cid Chevy (350- 4.030 bore) 10.5 to 1*
Speed-Pro flat top pistons (2 valve relief)
Big Mutha Thumpr Hyd. Roller Cam
Lift: .533"/.519"
Duration: 299°/319°
Lobe Separation Angle: 107
World Products iron heads w/Comp springs and retainers
1.5 ratio roller rockers
Std. rod and main bearings
Performer RPM Air-Gap intake manifold, ported
Coated Clear Image headers
Magnaflow stainless steel exhaust with X Pipe
Holley 650 double pumper carburetor
MSD pro billet Distributor and Digital 6AL Ignition box
Built 200R4 Overdrive Transmission, billet cooler and Hughes trans pan
3:73 gears with Detroit Tru Track rear end with Aluminum rear end cover
TCI Breakaway 2800# Torque Converter

Bennett68C10 · 01-13-2014, 11:43 PM

Sounds great and your truck is beautiful

MashTheGas 72 · 01-13-2014, 11:54 PM

Quote:

Originally Posted by Expat_dude

Thanks! Here are some specs
355 cid Chevy (350- 4.030 bore) 10.5 to 1*
Speed-Pro flat top pistons (2 valve relief)
Big Mutha Thumpr Hyd. Roller Cam
Lift: .533"/.519"
Duration: 299°/319°
Lobe Separation Angle: 107
World Products iron heads w/Comp springs and retainers
1.5 ratio roller rockers
Std. rod and main bearings
Performer RPM Air-Gap intake manifold, ported
Coated Clear Image headers
Magnaflow stainless steel exhaust with X Pipe
Holley 650 double pumper carburetor
MSD pro billet Distributor and Digital 6AL Ignition box
Built 200R4 Overdrive Transmission, billet cooler and Hughes trans pan
3:73 gears with Detroit Tru Track rear end with Aluminum rear end cover
TCI Breakaway 2800# Torque Converter

Thanks a lot for posting up the engine info.

70LonghornCST · 01-14-2014, 12:06 AM

Sweet sounding truck! I moved this to the Racing and High Performance area for you.

hotrod 80 · 01-14-2014, 02:07 AM

Sounds great

MashTheGas 72 · 01-14-2014, 01:17 PM

Hey Expat. How is the power with this Cam. I've heard there just for sound. I was looking to by one myself, but didn't know about the power issue. Boy it sure sounds awesome.

Expat_dude · 01-14-2014, 06:40 PM

Seat of the pants it feels just as strong as the solid cam set up. It sure revs better!

MashTheGas 72 · 01-14-2014, 11:02 PM

That's great to know for sure. I'm definitely looking into that setup. Thanks for letting me know.

01-13-2014, 09:50 PM	#1
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Cam installed, exhaust video Now we talking! I went from a .555 solid lifter cam to a Big Mutha Thumpr Hyd. Roller Cam Lift: .533"/.519" Duration: 299°/319° Lobe Separation Angle: 107 Exhaust - Clear Image headers dumping into Magna Flow S/S exhaust with cross over __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

01-13-2014, 10:21 PM	#2
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Cam installed, exhaust video Sounds nice!!!!

01-13-2014, 10:24 PM	#3
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: Cam installed, exhaust video Looks and sounds great! Congratulations! __________________ 1970 SWB Build

01-13-2014, 10:56 PM	#4
MashTheGas 72 Registered User Join Date: Nov 2013 Location: Folkston Ga Posts: 178	Re: Cam installed, exhaust video That's awesome Looks and Sound. What all have you done to the motor? __________________ 72 GMC 1/2 Ton

01-13-2014, 11:05 PM	#5
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: Cam installed, exhaust video Thanks! Here are some specs 355 cid Chevy (350- 4.030 bore) 10.5 to 1* Speed-Pro flat top pistons (2 valve relief) Big Mutha Thumpr Hyd. Roller Cam Lift: .533"/.519" Duration: 299°/319° Lobe Separation Angle: 107 World Products iron heads w/Comp springs and retainers 1.5 ratio roller rockers Std. rod and main bearings Performer RPM Air-Gap intake manifold, ported Coated Clear Image headers Magnaflow stainless steel exhaust with X Pipe Holley 650 double pumper carburetor MSD pro billet Distributor and Digital 6AL Ignition box Built 200R4 Overdrive Transmission, billet cooler and Hughes trans pan 3:73 gears with Detroit Tru Track rear end with Aluminum rear end cover TCI Breakaway 2800# Torque Converter __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

01-13-2014, 11:43 PM	#6
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Cam installed, exhaust video Sounds great and your truck is beautiful __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-14-2014, 12:06 AM	#8
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Cam installed, exhaust video Sweet sounding truck! I moved this to the Racing and High Performance area for you. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-14-2014, 02:07 AM	#9
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Cam installed, exhaust video Sounds great __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

01-14-2014, 01:17 PM	#10
MashTheGas 72 Registered User Join Date: Nov 2013 Location: Folkston Ga Posts: 178	Re: Cam installed, exhaust video Hey Expat. How is the power with this Cam. I've heard there just for sound. I was looking to by one myself, but didn't know about the power issue. Boy it sure sounds awesome. __________________ 72 GMC 1/2 Ton

01-14-2014, 06:40 PM	#11
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: Cam installed, exhaust video Seat of the pants it feels just as strong as the solid cam set up. It sure revs better! __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

01-14-2014, 11:02 PM	#12
MashTheGas 72 Registered User Join Date: Nov 2013 Location: Folkston Ga Posts: 178	Re: Cam installed, exhaust video That's great to know for sure. I'm definitely looking into that setup. Thanks for letting me know. __________________ 72 GMC 1/2 Ton



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.