Gas Filler Hose - The 1947 - Present Chevrolet & GMC Truck Message Board Network

k5hart · 12-21-2003, 07:15 PM

Hello everyone,

I have been a reader of these forums for a while now, but never posted. Well...I guess its time to start talking. I have a question? Does anyone know if the gas tank filler hose for our blazers are being reproduced? If it is, who is carrying it? I am in the process of replacing the 40 gallon custom tank with a stock tank in my 72 blazer and of course the hose has been cut. Hopefully this is the last thing holding me up, Im ready to drive the old truck again!

Thanks for the help. These boards are full of some great people. Will look forward to interacting a little more.

bouncytruck · 12-21-2003, 11:40 PM

Welcome to the board from the Pacific Northwest. I don't believe anyone is reproducing the Blazer filler neck but there are always guys on the board parting blazers with used parts for sale.

Post some pictures of your Blazer when you get a chance. There aren't too many 2wd trucks out there.

JayDubBlazer · 12-22-2003, 05:26 AM

I don't think it is being reproduced but there is a replacement hopefully somebody know the answer. Welcome to the board from Iowa

k5hart · 12-22-2003, 08:40 AM

Thanks for the help guys. I might have to get creative with the hose, if nothing turns up.

Heres a pic. Will try to add more later today.

smokekiki · 12-22-2003, 10:59 AM

Are you talking about the rubber hose?If so you can get the hose.Check with the vendors on the board.If they can't get you one LMC has them.Local auto parts might have them to.

smokekiki · 12-22-2003, 11:01 AM

Check with Ed at www.mothertruckers.net he is in Bradenton.

JimKshortstep4x4 · 12-22-2003, 11:02 AM

The large gas hose should be available at your local parts store. We bought the hose from our local Auto Value, but I would try NAPA or whoever is in your area.

Jim

*Gee_Emm* · 12-22-2003, 11:15 AM

If you need a chunk of rubber gas hose try the junkyard. Last time I went shopping for filler neck hose I discovered that it is VERY expensive.

JimKshortstep4x4 · 12-22-2003, 12:19 PM

Gee Emm is right, the hose is very expensive.

Jim

smokekiki · 12-22-2003, 12:31 PM

$14.95 thru LMC.I don't think that is to bad for a hose that lets the gas go into your tank,instead of your interior!

k5hart · 12-22-2003, 10:02 PM

Yes I am looking for the large rubber hose. I have checked with all of the parts stores around, even Napa, and they all gave me that blank stair and said they didnt carry anything like that. Pretty typical of the parts stores around. I will pull out my LMC catalog and take a look, plus check some of the venders here. Thanks for the suggestions guys. As requested here are more pics.

k5hart · 12-22-2003, 10:04 PM

(2)

k5hart · 12-22-2003, 10:05 PM

(3)

k5hart · 12-22-2003, 10:06 PM

(4)

6772king · 12-22-2003, 10:31 PM

hello from PA

that is one sweet blazer!!!! looks good

bouncytruck · 12-23-2003, 02:30 AM

Very nice looking blazer!

k5hart · 12-23-2003, 09:13 AM

Thanks for the compliments everyone. Can you believe its all original. Even the paint. I was very lucky to find it. It looks like this will be the last time for a couple of days I'll be on. We are off to West Virginia for the holidays. Everyone have a good Christmas!

**Classic Heartbeat** · 12-24-2003, 02:07 PM

I stock the rubber filler hose here at my shop. Most auto supply store will not carry it, because it is too expencive, and there is not enough call for it. The size is 1 1/4". Here is a link:
http://www.classicheartbeat.com/fuel_parts.htm
WES www.ClassicHeartbeat.com

K5 Blazer · 12-29-2003, 09:37 PM

We carry it as well bud . . . www.vintageblazer.com

k5hart · 12-29-2003, 10:55 PM

Hello everyone. Back in town from one busy trip. Looks like I didnt look around the aftermarket suppliers enough. I did come up with some new hose from an industrial supply company that said it was used on large tractors, etc. Its a little heavy duty but I may see if it will work. If not I will buy the original stuff and quit fighting this job. Thanks again.

Leinie · 12-30-2003, 02:10 AM

When I replaced mine, I got it from an auto parts store run by some old guy who just happened to have some laying around. It seems it was in demand for tractors years ago. Cost me $4

12-21-2003, 07:15 PM	#1
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Gas Filler Hose Hello everyone, I have been a reader of these forums for a while now, but never posted. Well...I guess its time to start talking. I have a question? Does anyone know if the gas tank filler hose for our blazers are being reproduced? If it is, who is carrying it? I am in the process of replacing the 40 gallon custom tank with a stock tank in my 72 blazer and of course the hose has been cut. Hopefully this is the last thing holding me up, Im ready to drive the old truck again! Thanks for the help. These boards are full of some great people. Will look forward to interacting a little more. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-21-2003, 11:40 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Welcome to the board from the Pacific Northwest. I don't believe anyone is reproducing the Blazer filler neck but there are always guys on the board parting blazers with used parts for sale. Post some pictures of your Blazer when you get a chance. There aren't too many 2wd trucks out there. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

12-22-2003, 05:26 AM	#3
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	I don't think it is being reproduced but there is a replacement hopefully somebody know the answer. Welcome to the board from Iowa __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

12-22-2003, 08:40 AM	#4
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Thanks for the help guys. I might have to get creative with the hose, if nothing turns up. Heres a pic. Will try to add more later today. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-22-2003, 10:59 AM	#5
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	Are you talking about the rubber hose?If so you can get the hose.Check with the vendors on the board.If they can't get you one LMC has them.Local auto parts might have them to. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

12-22-2003, 11:01 AM	#6
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	Check with Ed at www.mothertruckers.net he is in Bradenton. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

12-22-2003, 11:02 AM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	The large gas hose should be available at your local parts store. We bought the hose from our local Auto Value, but I would try NAPA or whoever is in your area. Jim

12-22-2003, 11:15 AM	#8
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	If you need a chunk of rubber gas hose try the junkyard. Last time I went shopping for filler neck hose I discovered that it is VERY expensive.

12-22-2003, 12:19 PM	#9
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Gee Emm is right, the hose is very expensive. Jim

12-22-2003, 12:31 PM	#10
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	$14.95 thru LMC.I don't think that is to bad for a hose that lets the gas go into your tank,instead of your interior! __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

12-22-2003, 10:02 PM	#11
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Yes I am looking for the large rubber hose. I have checked with all of the parts stores around, even Napa, and they all gave me that blank stair and said they didnt carry anything like that. Pretty typical of the parts stores around. I will pull out my LMC catalog and take a look, plus check some of the venders here. Thanks for the suggestions guys. As requested here are more pics. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-22-2003, 10:04 PM	#12
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	(2) __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-22-2003, 10:05 PM	#13
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	(3) __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-22-2003, 10:06 PM	#14
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	(4) __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-22-2003, 10:31 PM	#15
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	hello from PA that is one sweet blazer!!!! looks good __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!



Register or Log In To remove these advertisements.

12-23-2003, 02:30 AM	#16
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Very nice looking blazer! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

12-23-2003, 09:13 AM	#17
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Thanks for the compliments everyone. Can you believe its all original. Even the paint. I was very lucky to find it. It looks like this will be the last time for a couple of days I'll be on. We are off to West Virginia for the holidays. Everyone have a good Christmas! __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-24-2003, 02:07 PM	#18
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	I stock the rubber filler hose here at my shop. Most auto supply store will not carry it, because it is too expencive, and there is not enough call for it. The size is 1 1/4". Here is a link: http://www.classicheartbeat.com/fuel_parts.htm WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

12-29-2003, 09:37 PM	#19
K5 Blazer Blazerologist Join Date: Feb 2001 Location: Brentwood, Ca. USA Posts: 154	We carry it as well bud . . . www.vintageblazer.com __________________ www.californiak5.com

12-29-2003, 10:55 PM	#20
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Hello everyone. Back in town from one busy trip. Looks like I didnt look around the aftermarket suppliers enough. I did come up with some new hose from an industrial supply company that said it was used on large tractors, etc. Its a little heavy duty but I may see if it will work. If not I will buy the original stuff and quit fighting this job. Thanks again. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

12-30-2003, 02:10 AM	#21
Leinie Registered User Join Date: Feb 2001 Location: USA Posts: 2,613	When I replaced mine, I got it from an auto parts store run by some old guy who just happened to have some laying around. It seems it was in demand for tractors years ago. Cost me $4

Register or Log In To remove these advertisements.