NH Parting out - 1987 V3500 Sierra - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Maynard · 02-11-2014, 08:56 PM

I'd never thought to measure the space available for a double retractor. There's only 2 inches clearance between the floor and the seat. There's no way one's going in there, so I'm thinking that might be a reason they went with a single retractor.

Can't use these, I guess, so back to the drawing board.

bigblock73 · 02-12-2014, 12:06 AM

Is the gauge cluster still available? I really only need the cluster housing (green piece), but will take the entire cluster if athe price is right. My zip is 55448.

Thank you.

**JJorgensen52** · 02-12-2014, 12:37 AM

Quote:

Originally Posted by bigblock73

Is the gauge cluster still available? I really only need the cluster housing (green piece), but will take the entire cluster if athe price is right. My zip is 55448.

Thank you.

It may be spoken for, I will let you know.

**gmc 2500 4x4** · 02-14-2014, 06:51 AM

I need both wiper arms w/hoses on them, and if it has working duel horns i'll take them. shipped to 14063. is the jack setup there? intrested

**JJorgensen52** · 02-14-2014, 10:48 AM

Quote:

Originally Posted by gmc 2500 4x4

I need both wiper arms w/hoses on them, and if it has working duel horns i'll take them. shipped to 14063. is the jack setup there? intrested

Wipers are sold. I am actually not sure if the horns work, I will check when I next work on the truck (next weekend).

Jack setup I'm keeping for my other truck.

gmhammes · 02-14-2014, 02:34 PM

The person who had my truck before shaved it and put in door pops.
If possible i need the exterior and interior door handles, complete door lock assembly (left and right) and key(s) and exterior mirrors. i know that's quite a bit but let me know if we can work something out. my zip is 61705

thanks

**gmc 2500 4x4** · 02-14-2014, 04:55 PM

thanx

JW76 · 02-15-2014, 12:47 PM

Do you still have the stainless simulators. They all look real nice with one have a couple dings. Is this correct?

**JJorgensen52** · 02-15-2014, 06:56 PM

Quote:

Originally Posted by JW76

Do you still have the stainless simulators. They all look real nice with one have a couple dings. Is this correct?

Yes, just the one on the driver's rear has the 2 dings. I expect they could be popped fairly easily. They're still available

**JJorgensen52** · 02-15-2014, 07:00 PM

Quote:

Dash bezel, gauges and heater control are spoken for.

Change of plans, these parts still available

**JJorgensen52** · 02-20-2014, 04:44 PM

Bump. Looks like doors are sold local

mike in mo · 02-23-2014, 12:53 AM

clutch pedal ? is it hydro clutch

**JJorgensen52** · 02-23-2014, 12:57 AM

Quote:

Originally Posted by mike in mo

clutch pedal ? is it hydro clutch

Yes, it is hydro clutch, external slave. I've removed the bellhousing, but all the clutch system is still sealed up and I kept the slave compressed so as to not get air in it. Do you need just the pedal or the whole assembly?

mike in mo · 02-23-2014, 11:10 AM

can i get a pick of the pedals and hanger setup you got been told of 2 types of mounts one has clutch brake pedal on 1 bolt other has them on 2 . if you got the 1 bolt mount just the pedal if its the 2 bolt i need pedals and mount. but i dont need the slave or any of that.

**JJorgensen52** · 02-24-2014, 11:37 AM

Quote:

Originally Posted by mike in mo

can i get a pick of the pedals and hanger setup you got been told of 2 types of mounts one has clutch brake pedal on 1 bolt other has them on 2 . if you got the 1 bolt mount just the pedal if its the 2 bolt i need pedals and mount. but i dont need the slave or any of that.

It would appear I have the 2 bolt variety, I wasn't able to get a picture but I will grab one Thursday PM or Friday AM when I go out to work on the truck.

jbristo67 · 02-24-2014, 10:37 PM

Does it have good defrost bezels? If so how much

**JJorgensen52** · 02-24-2014, 10:43 PM

Quote:

Originally Posted by jbristo67

Does it have good defrost bezels? If so how much

You mean where the defroster comes through the dash pad? I've honestly no idea. I'll look on Friday.

86454k30 · 02-25-2014, 12:45 AM

If the cab light lenses are not cracked how much for them?

**JJorgensen52** · 02-25-2014, 03:27 PM

Quote:

Originally Posted by 86454k30

If the cab light lenses are not cracked how much for them?

Those I'm keeping as spares for my other junk, sorry

jbristo67 · 02-25-2014, 05:55 PM

Quote:

Originally Posted by JJorgensen52

You mean where the defroster comes through the dash pad? I've honestly no idea. I'll look on Friday.

Yep I need those.

**JJorgensen52** · 03-16-2014, 11:25 AM

Gauge Cluster

Defroster vents

Stainless door trims

Grille

thefraze_1020 · 03-16-2014, 12:42 PM

What does the parking brake assembly look like?

And how much for the door panels?

Door lock knobs (the little black ones)?

**tkeduk8r** · 03-16-2014, 03:00 PM

Id be very interested in the under bed tool boxes, but I don't know how ecomicallly we could get them out to MN... pm me if you want to try to work something out... thanks in advance!
Mike

**JJorgensen52** · 03-16-2014, 08:42 PM

Quote:

Originally Posted by thefraze_1020

What does the parking brake assembly look like?

And how much for the door panels?

Door lock knobs (the little black ones)?

Doors and all associated parts are gone, sorry.

Parking brake assembly looked good, $35 shipped would do it I think. I won't be able to pull it until next weekend.

**JJorgensen52** · 03-16-2014, 08:43 PM

Quote:

Originally Posted by tkeduk8r

Id be very interested in the under bed tool boxes, but I don't know how ecomicallly we could get them out to MN... pm me if you want to try to work something out... thanks in advance!
Mike

Mike,

They're not in the best of shape, I'm hopefully going to be getting them cut free of the truck next week and I can take some photos for you, if you're still interested we could try and figure something out.

02-11-2014, 08:56 PM	#26
Maynard Registered User Join Date: Feb 2014 Location: Omaha, NE Posts: 27	Re: Parting out - 1987 V3500 Sierra I'd never thought to measure the space available for a double retractor. There's only 2 inches clearance between the floor and the seat. There's no way one's going in there, so I'm thinking that might be a reason they went with a single retractor. Can't use these, I guess, so back to the drawing board.

02-12-2014, 12:06 AM	#27
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Parting out - 1987 V3500 Sierra Is the gauge cluster still available? I really only need the cluster housing (green piece), but will take the entire cluster if athe price is right. My zip is 55448. Thank you. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-14-2014, 06:51 AM	#29
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,974	Re: Parting out - 1987 V3500 Sierra I need both wiper arms w/hoses on them, and if it has working duel horns i'll take them. shipped to 14063. is the jack setup there? intrested

02-14-2014, 02:34 PM	#31
gmhammes Registered User Join Date: Aug 2013 Location: Central Illinois Posts: 31	Re: Parting out - 1987 V3500 Sierra The person who had my truck before shaved it and put in door pops. If possible i need the exterior and interior door handles, complete door lock assembly (left and right) and key(s) and exterior mirrors. i know that's quite a bit but let me know if we can work something out. my zip is 61705 thanks

02-14-2014, 04:55 PM	#32
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,974	Re: Parting out - 1987 V3500 Sierra thanx

02-15-2014, 12:47 PM	#33
JW76 Registered User Join Date: Dec 2008 Location: Providence Rhode Island Posts: 404	Re: Parting out - 1987 V3500 Sierra Do you still have the stainless simulators. They all look real nice with one have a couple dings. Is this correct?

02-20-2014, 04:44 PM	#36
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: Parting out - 1987 V3500 Sierra Bump. Looks like doors are sold local __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

02-23-2014, 12:53 AM	#37
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	Re: Parting out - 1987 V3500 Sierra clutch pedal ? is it hydro clutch

02-23-2014, 11:10 AM	#39
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	Re: Parting out - 1987 V3500 Sierra can i get a pick of the pedals and hanger setup you got been told of 2 types of mounts one has clutch brake pedal on 1 bolt other has them on 2 . if you got the 1 bolt mount just the pedal if its the 2 bolt i need pedals and mount. but i dont need the slave or any of that.

02-24-2014, 10:37 PM	#41
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: Parting out - 1987 V3500 Sierra Does it have good defrost bezels? If so how much __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

02-25-2014, 12:45 AM	#43
86454k30 Registered User Join Date: May 2008 Location: Spokane, Washington Posts: 596	Re: Parting out - 1987 V3500 Sierra If the cab light lenses are not cracked how much for them?

03-16-2014, 11:25 AM	#46
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: Parting out - 1987 V3500 Sierra Gauge Cluster Defroster vents Stainless door trims Grille __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

03-16-2014, 12:42 PM	#47
thefraze_1020 Registered User Join Date: Mar 2014 Location: Mount Vernon, WA Posts: 417	Re: Parting out - 1987 V3500 Sierra What does the parking brake assembly look like? And how much for the door panels? Door lock knobs (the little black ones)? __________________ Cameron 1984 Chevy C20 Custom Deluxe

03-16-2014, 03:00 PM	#48
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting out - 1987 V3500 Sierra Id be very interested in the under bed tool boxes, but I don't know how ecomicallly we could get them out to MN... pm me if you want to try to work something out... thanks in advance! Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.