1/2 ton 4x4 axles for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GreenMystChevy · 12-26-2003, 01:17 PM

I have a set of axles, '69 I believe, out from under my truck to make way for the new 3/4 ton that I'm putting in.

The rear is a 12 bolt and the front is a Dana 44. 4.10 gears and they both worked fine a few months ago when I put her in the garage. Being from a '69 it has front drum brakes.

I never had the time to put many miles on them but the previous owner (a trustworthy board member) said there were no problems that he knew of.

They come with the original leaf springs if you want them and I can deliver them locally (or a tiny bit further for a small fee.)

$200 OBO

**JIMs70GMC** · 12-26-2003, 05:16 PM

open or closed knuckle?

GreenMystChevy · 12-26-2003, 06:18 PM

closed

12-26-2003, 01:17 PM	#1
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	1/2 ton 4x4 axles for sale I have a set of axles, '69 I believe, out from under my truck to make way for the new 3/4 ton that I'm putting in. The rear is a 12 bolt and the front is a Dana 44. 4.10 gears and they both worked fine a few months ago when I put her in the garage. Being from a '69 it has front drum brakes. I never had the time to put many miles on them but the previous owner (a trustworthy board member) said there were no problems that he knew of. They come with the original leaf springs if you want them and I can deliver them locally (or a tiny bit further for a small fee.) $200 OBO __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

12-26-2003, 05:16 PM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	open or closed knuckle? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

12-26-2003, 06:18 PM	#3
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	closed __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.