Where to find: SEAT BELT SHOULDER BOLT - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swissarmychainsaw · 03-15-2014, 03:57 PM

I'm trying to add shoulder belts to my 73 Suburban (front and rear).

I found a set of the Shoulder (pivot) bolts that go into the B-Pillar, but for the life of me I can't find them new anywhere.

I'm hesitant to just buy a bolt from the hardware store since these are kind of specialty and the hardened versions are not quite the same from the local ACE.

Juliano's sells this bolt but it's a 3/16" Fine thread, and mine is more like
a 1/2 Coarse.

Where do I find this?

Thanks!
SEAT BELT SHOULDER BOLT

68Timber · 03-15-2014, 08:19 PM

You found a used set? Why not run them?

swissarmychainsaw · 03-15-2014, 08:45 PM

Quote:

Originally Posted by BRUISER

You found a used set? Why not run them?

I found 2 but need two more for the other side!

Trying to get 4 proper shoulder belts in the beast!

68Timber · 03-15-2014, 09:40 PM

There are so many trucks being parted out the 73-87 classified section, you should be able to get two more cheap if your local junk yards are bare.

03-15-2014, 03:57 PM	#1
swissarmychainsaw Registered User Join Date: Jun 2009 Location: san francisco, ca (east bay) Posts: 674	Where to find: SEAT BELT SHOULDER BOLT I'm trying to add shoulder belts to my 73 Suburban (front and rear). I found a set of the Shoulder (pivot) bolts that go into the B-Pillar, but for the life of me I can't find them new anywhere. I'm hesitant to just buy a bolt from the hardware store since these are kind of specialty and the hardened versions are not quite the same from the local ACE. Juliano's sells this bolt but it's a 3/16" Fine thread, and mine is more like a 1/2 Coarse. Where do I find this? Thanks! SEAT BELT SHOULDER BOLT

03-15-2014, 08:19 PM	#2
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Where to find: SEAT BELT SHOULDER BOLT You found a used set? Why not run them? __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

03-15-2014, 09:40 PM	#4
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Where to find: SEAT BELT SHOULDER BOLT There are so many trucks being parted out the 73-87 classified section, you should be able to get two more cheap if your local junk yards are bare. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.