Power window wiring removal? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rs74** · 03-21-2014, 11:20 AM

Getting ready to replace the power doors on my K30. How do I go about getting the wiring out. Do I need to take it out of the door or is there a connection that I can undo behind the kick panel. If I have to take it out of the door then do I have to disconnect the regulator or can it all be fished out without taking everything apart?

**rs74** · 03-21-2014, 02:46 PM

Got it. Not sure how the factory routed the wires on these trucks. The previous owner had the wiring tucked between where the regulator and the door bolt together between the upper and lower bolts. I just unbolted the regulator and pulled the wiring out the hole in the door.

03-21-2014, 11:20 AM	#1
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Power window wiring removal? Getting ready to replace the power doors on my K30. How do I go about getting the wiring out. Do I need to take it out of the door or is there a connection that I can undo behind the kick panel. If I have to take it out of the door then do I have to disconnect the regulator or can it all be fished out without taking everything apart? __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

03-21-2014, 02:46 PM	#2
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: Power window wiring removal? Got it. Not sure how the factory routed the wires on these trucks. The previous owner had the wiring tucked between where the regulator and the door bolt together between the upper and lower bolts. I just unbolted the regulator and pulled the wiring out the hole in the door. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.