MI 1972 GMC 2500 "Part out" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 03-30-2014, 04:40 PM

Quote:

Originally Posted by nobolt

hi Dave,
what shape is the driver door in?
I still need a '72 DSide.
thanks

Dave, drivers door is a 67, lower is shot.

**leddzepp** · 03-30-2014, 04:44 PM

Are the pictured black 72 arm rests for sale? If so how much to 92503. Thanks.

Number98 · 03-30-2014, 05:26 PM

How about the grill eyebrows? on the front edges of the fender on either side of the grille.

**DaHos** · 03-30-2014, 05:33 PM

Quote:

Originally Posted by leddzepp

Are the pictured black 72 arm rests for sale? If so how much to 92503. Thanks.

They are olive not black but yes they are for sale. $35

Quote:

Originally Posted by Number98

How about the grill eyebrows? on the front edges of the fender on either side of the grille.

No eyebrows, the front end was swapped for a Chevy style clip.

nobolt · 03-30-2014, 06:04 PM

Quote:

drivers door is a 67

the same guy must have "customized" my 72!!!
flames and a 67 drivers door...

**DaHos** · 03-30-2014, 06:40 PM

Quote:

Originally Posted by undertaker72

im interested , does it have the upper heater hose return , and auto trans correct ,

Yes it has the auto trans cooler and heater barb. Looks to have been repaired poorly a few times. Without pulling it and having it tested I'd call it a core.

And a few pics of today's picking and the cut in shroud.

**DaHos** · 03-30-2014, 06:43 PM

Quote:

Originally Posted by DeadheadNM

Thanks - sounds like RH pass door parts are in decent shape - what do you need for the latch and window regulator shipped to 59901? Will pass on LH parts as sound so-so and the mirror. Thanks, Pete

I also pulled the pass side window regulator, it is a 72 and functions properly. Add $25 if you want it too.

**undertaker72** · 03-30-2014, 07:14 PM

dahos, what would core price and shipping to Utah be , this might kill the deal , maybe I better have mine done

**TBONE1964** · 03-30-2014, 07:21 PM

Quote:

Originally Posted by nobolt

the same guy must have "customized" my 72!!!
flames and a 67 drivers door...

I was going to ask how much for the flames?

Can you get them off in one peace

Good Luck with the sales Dave

**DeadheadNM** · 03-30-2014, 08:04 PM

Quote:

Originally Posted by DaHos

Pass side door latch and Pass side window regulator and pass side latch remote (needed ?) $65 shipped for all 3 items.

Quote:

Originally Posted by DaHos

I also pulled the pass side window regulator, it is a 72 and functions properly. Add $25 if you want it too.

Are the nylon rollers intact on the window regs? Just to clarify, you mean you pulled the LH driver side as well? Thanks again, Pete

**DaHos** · 03-30-2014, 08:17 PM

Quote:

Originally Posted by DeadheadNM

Are the nylon rollers intact on the window regs? Just to clarify, you mean you pulled the LH driver side as well? Thanks again, Pete

Originally Posted by DeadheadNM
View Post
Thanks - sounds like RH pass door parts are in decent shape - what do you need for the latch and window regulator shipped to 59901? Will pass on LH parts as sound so-so and the mirror. Thanks, Pete

Pass side door latch and Pass side window regulator and pass side latch remote (needed ?) $65 shipped for all 3 items.

So yes, I have the 72 correct pass side items as listed above and the drivers side window regulator. The rollers are firm on the studs, 1 roller does have a flat spot.

**DeadheadNM** · 03-30-2014, 08:40 PM

Thanks - I'll take the pass side parts plus the driver window regulator. PM payment details when poss. Pete

Oddfire · 03-30-2014, 09:25 PM

Are the fender emblems still up for grabs? If so i'll take them. Jamie 71

Longhorn

**HIGHWAY BY THE SEA** · 03-30-2014, 10:44 PM

There seems to be an automatic transmission-type steering column in the inside-cab pic, but not in the under-hood one. Is there one, is it for sale, and how much?

**ScottH** · 03-30-2014, 11:53 PM

Looking for fuel lines that runs inside cab from fuel sender/tank to under cab.

Thanks
Scott

**DaHos** · 03-31-2014, 02:18 AM

Quote:

Originally Posted by Oddfire

Are the fender emblems still up for grabs? If so i'll take them. Jamie 71

Longhorn

Have not heard back from "davischevy" yours if you want them. $15 shipped

Quote:

Originally Posted by HIGHWAY BY THE SEA

There seems to be an automatic transmission-type steering column in the inside-cab pic, but not in the under-hood one. Is there one, is it for sale, and how much?

Its still there, it is spoken for local when Im done moving truck around, If it falls through Ill let you know.

Quote:

Originally Posted by ScottH

Looking for fuel lines that runs inside cab from fuel sender/tank to under cab.

Thanks
Scott

3/8 feed and vent line. Upper looks good, ill take a look on the underside tonight. Were you still needing the PS ft bed trim also? Black/woodgrain? Ill see what I have there too.

hogwild99 · 03-31-2014, 08:54 AM

Do you know if the cab light and cover and harness will work in a 68 c10?

**DaHos** · 03-31-2014, 09:03 AM

Quote:

Originally Posted by hogwild99

Do you know if the cab light and cover and harness will work in a 68 c10?

Yes it will. Complete w interior courtesy lamps and harness. Some pitting of chrome. $30 shipped

hogwild99 · 03-31-2014, 09:40 AM

Do the courtesy lamps go in the doors? If so I do not have a spot for them, could I cut a spot for them or could I just not use them? Also I have to add my new account to my pay pal so if I sent cash would that work? My zip is 73160 would the $30 still work to that zip?

**ScottH** · 03-31-2014, 10:27 AM

Yupper, still lookin for the trim piece in woodgrain.
Thanks 4 following up on the fuel line.

Scott

BKSS67 · 03-31-2014, 10:57 AM

Dave,

I don't think I saw anyone ask about the cigarette lighter? How much are you asking for this with the associated pigtail wires?

I may need you to toss it in with the caps.

Thanks
Brian

**DaHos** · 03-31-2014, 11:44 AM

Quote:

Originally Posted by hogwild99

Do the courtesy lamps go in the doors? If so I do not have a spot for them, could I cut a spot for them or could I just not use them? Also I have to add my new account to my pay pal so if I sent cash would that work? My zip is 73160 would the $30 still work to that zip?

Yes you can drill the holes or not use them. All 3 harnesses are included for whatever route you go. I'm good w cash or usps mo. If needed shoot me a PM for address.

Quote:

Originally Posted by BKSS67

Dave,

I don't think I saw anyone ask about the cigarette lighter? How much are you asking for this with the associated pigtail wires?

I may need you to toss it in with the caps.

Thanks
Brian

It will be in with the caps..

**DaHos** · 03-31-2014, 11:59 AM

Quote:

Originally Posted by undertaker72

dahos, what would core price and shipping to Utah be , this might kill the deal , maybe I better have mine done

Ouch !

FedEx - 1 package, 28.00 lbs, Your Packaging, 36 in x 9 in x 28 in to 84648 $52

Local scrap price on this size of rad is $30.

Cant see it being worth $85.............but your call.

BKSS67 · 03-31-2014, 12:39 PM

Thanks Dave!

**DaHos** · 03-31-2014, 05:44 PM

Quote:

Originally Posted by ScottH

Yupper, still lookin for the trim piece in woodgrain.
Thanks 4 following up on the fuel line.

Scott

Set 1 I had from the Longhorn was a bust, to scaly to sell em but......

GM undercoating saved this pair !

Both lines, upper clip and cab grommet. $30 shipped.

03-30-2014, 04:44 PM	#27
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,117	Re: 1972 GMC 2500 "Part out" Are the pictured black 72 arm rests for sale? If so how much to 92503. Thanks. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

03-30-2014, 05:26 PM	#28
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: 1972 GMC 2500 "Part out" How about the grill eyebrows? on the front edges of the fender on either side of the grille.

03-30-2014, 07:14 PM	#33
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: 1972 GMC 2500 "Part out" dahos, what would core price and shipping to Utah be , this might kill the deal , maybe I better have mine done

03-30-2014, 08:40 PM	#37
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,481	Re: 1972 GMC 2500 "Part out" Thanks - I'll take the pass side parts plus the driver window regulator. PM payment details when poss. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-30-2014, 09:25 PM	#38
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1972 GMC 2500 "Part out" Are the fender emblems still up for grabs? If so i'll take them. Jamie 71 Longhorn

03-30-2014, 10:44 PM	#39
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: 1972 GMC 2500 "Part out" There seems to be an automatic transmission-type steering column in the inside-cab pic, but not in the under-hood one. Is there one, is it for sale, and how much? __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion

03-30-2014, 11:53 PM	#40
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: 1972 GMC 2500 "Part out" Looking for fuel lines that runs inside cab from fuel sender/tank to under cab. Thanks Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-31-2014, 08:54 AM	#42
hogwild99 Registered User Join Date: Mar 2014 Location: moore ok Posts: 79	Re: 1972 GMC 2500 "Part out" Do you know if the cab light and cover and harness will work in a 68 c10?

03-31-2014, 09:40 AM	#44
hogwild99 Registered User Join Date: Mar 2014 Location: moore ok Posts: 79	Re: 1972 GMC 2500 "Part out" Do the courtesy lamps go in the doors? If so I do not have a spot for them, could I cut a spot for them or could I just not use them? Also I have to add my new account to my pay pal so if I sent cash would that work? My zip is 73160 would the $30 still work to that zip?

03-31-2014, 10:27 AM	#45
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: 1972 GMC 2500 "Part out" Yupper, still lookin for the trim piece in woodgrain. Thanks 4 following up on the fuel line. Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-31-2014, 10:57 AM	#46
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: 1972 GMC 2500 "Part out" Dave, I don't think I saw anyone ask about the cigarette lighter? How much are you asking for this with the associated pigtail wires? I may need you to toss it in with the caps. Thanks Brian

03-31-2014, 12:39 PM	#49
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: 1972 GMC 2500 "Part out" Thanks Dave!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.